745226

Parkside IAN 110671 PSBM 500 B3 Manual

45
Zoom out
Zoom in
Previous page
1/60
Next page
45
GB
Technical data
Rated input voltage ....230-240 V~, 50 Hz
Idling speed n
0
..................50-3000 min
-1
Power input (power consumption) ...500 W
Blow count ...................max. 48000 min
-1
Speed ................................max. 7.5 Nm
Max. absorption capacity
of the drill chuck ...................... Ø 13 mm
Drill chucking capacity............... 2-13 mm
Max. drill diameter
in wood ................................... 25 mm
in concrete ............................... 10 mm
in steel ....................................... 8 mm
Protection class .................................
II
Protection category...........................IP20
Weight (incl. accessories) ... approx. 1.8 kg
Sound pressure level
(L
PA
) ....................... 93 dB(A), K
PA
=3 dB
Sound power level (L
WA
)
measured ............ 104 dB(A); K
WA
=3 dB
Vibration (a
h
)
Drilling in metal ..................... 4.8 m/s
2
Impact drilling in concrete ..... 15.1 m/s
2
K=1.5 m/s
2
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
Safety instructions
Ensure that the safety instructions are ob-
served when operating the appliance.
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 110671 PSBM 500 B3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 110671 PSBM 500 B3 in the language / languages: French, Italian as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 110671 PSBM 500 B3

Parkside IAN 110671 PSBM 500 B3 User Manual - English, German, Dutch, Danish, Swedish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info