Manual Parkside IAN 109803 PDBS 6.2 A1 (page 33 of 39) (French)

745457

Zoom out

Zoom in

1/39

33 GB

General safety rules

repairing, maintaining, changing accessories on,

or working near the nibbler or shear. Failure to

do so can result in serious bodily injury.

Only qualiﬁed and trained operators should in-

stall, adjust or use the nibbler or shear.

Do not modify this nibbler or shear. Modiﬁcations

can reduce the eﬀectiveness of safety measures

and increase the risks to the operator.

Do not discard the safety instructions; give them

to the operator.

Do not use the nibbler or shear if it has been

damaged.

Tools shall be inspected periodically to verify

that the ratings and markings required by this

part of ISO 11148 are legibly marked on the

tool. If necessary, the user must contact the

manufacturer for replacement labels.

Projectile hazards

Disconnect the nibbler or shear from the energy

source when changing inserted tool or acces-

sories.

Be aware that failure of the workpiece or acces-

sories, or even of the inserted tool itself can

generate high-velocity projectiles.

Always wear impact-resistant eye protection dur-

ing operation of the tool. The grade of protection

required should be assessed for each use.

Ensure that the workpiece is securely ﬁxed.

Ensure that metal cuttings are directed so as

not to cause a hazard.

Operating hazards

Use of nibblers and shears can expose the oper-

ator’s hands to hazards including cuts, abrasions

and heat:

– avoid contact with the cutter whenever the nib-

bler or shear is connected to the power supply;

– cutting with nibblers and shears creates sharp

edges.

Wear relevant protective equipment such as gloves.

Operators and maintenance personnel shall be

physically able to handle the bulk, weight and

power of the tool.

Hold the tool correctly; be ready to counteract

normal or sudden movements and have both

hands available.

Maintain a balanced body position and secure

footing.

Release the start-and-stop device in the case of

an interruption of the energy supply.

Use only lubricants recommended by the manu-

facturer.

Avoid direct contact with the inserted tool during

and after use as it can become hot.

Sharp tools should always be used.

Avoid unsuitable postures as it is likely for these

positions not to allow counteracting of normal or

unexpected movement of the tool.

Unexpected tool movement or breakage of cut-

ters can cause injuries.

Warnings shall be given against the risk of explo-

sion or ﬁre due to the material being processed.

Repetitive motions hazards

When using a nibbler or shear to perform work-

related activities, the operator can experience

discomfort in the hands, arms, shoulders, neck

or other parts of the body.

While using a nibbler or shear, the operator

should adopt a comfortable posture whilst main-

taining secure footing and avoiding awkward

or oﬀ-balance postures. The operator should

change posture during extended tasks; this can

help avoid discomfort and fatigue.

If the operator experiences symptoms such as

persistent or recurring discomfort, pain, throbb

ing,

aching, tingling, numbness, burning sensations

or stiﬀness, these warning signs should not be

ignored. The operator should consult a quali-

tied health professional.

Accessory hazards

Disconnect the nibbler or shear from the energy

supply before ﬁtting or changing the inserted

tool or accessory.

Use only sizes and types of accessories and

consumables that are recommended by the

109803_par_Druckluft-Blechschere PDBS 6.2A1_content_FR.indd 33 09.04.15 16:09

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 109803 PDBS 6.2 A1 in the language / languages: French as an attachment in your email.

The manual is 2,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 109803 PDBS 6.2 A1

Parkside IAN 109803 PDBS 6.2 A1 User Manual - English, German, Dutch - 39 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 109803 PDBS 6.2 A1 Manual

Product: