745457

Parkside IAN 109803 PDBS 6.2 A1 Manual

7
Zoom out
Zoom in
Previous page
1/39
Next page
7 GB/IE
Introduction / General safety rules
Noise parameter per EN15744:2008
Noise level L
pA
: 90.6 dB(A)
Sound power level L
WA
: 101.6 dB(A)
L
pC, peak
= 110.9 dB(A)
Uncertainty K = 3 dB
Vibration parameters per EN 12096, ISO 28927-7
Hand-arm vibration level: 0.55 m / s
2
Uncertainty K: 1.5 m / s
2
General safety rules
Note: When used in the following text, the terms
„compressed air unit“ or „device“ refer to the com-
pressed air unit specified in these instructions for use.
Basic safety measures must be
followed when using compressed air devices to elim-
inate the risk of fire, electric shock and personal in-
jury. Be sure to read and follow the notices within
these operating instructions prior to using the equip-
ment and store them in a safe location. The manufac-
turer assumes no liability for damages or personal
injury resulting from failure to follow these operating
instructions.
Persons (including children) who lack the knowl-
edge or experience to use the tool or whose
physical, sensory or intellectual capacities are
limited must never be allowed to use the tool
without supervision or instruction by a person
responsible for their safety.
Prevent children from playing with the device.
RISK OF INJURY! Before
performing maintenance tasks, disconnect the
compressed air supply.
EXPLOSION HAZARD! Never
use petrol or other flammable liquids
to clean the air tool! Sparks could
ignite residual vapours inside the compressed air
unit resulting in the compressed air unit explod-
ing. Do not use the device in explosive environ-
ments with flammable liquids, gasses or dust.
Never work on materials which are or could
potentially be highly flammable or explosive.
Only use the equipment in areas of application
for which it was designed!
Do not overburden the device.
Never use hydrogen, oxygen, carb
on
dioxide or other bottled gasses to
power this tool as doing so may re-
sult in an explosion and thus may cause severe
injuries.
Maintain and clean the device regularly as in-
structed (see Chapter „Cleaning and storage“).
Check the device for damage before startup.
Always make sure that the device is in perfect
condition each time before use.
Always be attentive! Unexpected movement of
the device may cause hazards.
Avoid placing your body in an unnatural position.
Keep proper footing and balance at all times.
By doing this you will be in a better position to
control the compressed air unit in unforeseen
circumstances.
Do not use any device if its switch is defective.
A device that can no longer be switched on and
off is dangerous and must be repaired.
Store the device out of the reach of children when
it is not in use. Do not let anyone use the device
if he or she is not familiar with it or has not read
the instructions and advice. Compressed air units
are dangerous when they are used by inexperi-
enced people.
Maintain the device carefully. Check that mov-
ing device parts are working properly and move
freely. Check for any parts that are broken or
damaged enough to detrimentally affect the
functioning of the device. Have damaged parts
repaired before using the device. Many accidents
have their origins in poorly maintained devices.
Switch the device off if you do not use it anymore.
Always wear personal protective
equipment and safety glasses. Wear-
ing personal protective equipment
such as dust mask, non-slip safety shoes, safety
helmet or ear protectors, depending on the type
of air tool and its application, reduces the risk
of injuries.
Check the connections and supply lines. All
maintenance devices, couplings and hoses must
be equipped to meet the pressure and air amounts
specified in the device specific values. Pressure
that is too low influences the functioning of the
device; pressure that is too high can cause dam-
age to property and personal injury.
Introduction
109803_par_Druckluft-Blechschere PDBS 6.2A1_content_NL.indd 7 09.04.15 16:09
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 109803 PDBS 6.2 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 109803 PDBS 6.2 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 109803 PDBS 6.2 A1

Parkside IAN 109803 PDBS 6.2 A1 User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info