595289
57
Zoom out
Zoom in
Previous page
1/79
Next page
57
GB MT
generation of mold and unpleasant
odours.
Free the outlet area from possible
shredded residues.
Removal of clogging and
blockage
Leaf material and fresh plant parts may
clog / block the device.
Cleaning the impeller wheel:
Pull out the mains plug!
D
1. Remove the Allen key attached
to the power cable (No.
A
13)
2. Use the key (13) to open the
screw on the impeller wheel
cover (25) and tip up the cover.
3. Carefully remove residues or
clogging materials from the im-
peller wheel (24).
4. Check to make sure the impeller
wheel is easier to turn and is in
undamaged condition. Have our
Service Centre (see address on
p. 17) replace a defective impel-
ler wheel.
5. Screw the cover down tight.
The device cannot be operated
unless the impeller wheel cover
is closed and properly screwed
down.
Cleaning the air outlet area:
1. Remove the collection bag.
2. Clean the external air outlet area on
the device.
3. Set the operating mode selector
switch to the suction symbol.
4. Remove dirt residues in the inner air
outlet area with a bottle brush or simi-
lar. Remove unwieldy objects with a
blunt tool without sharp edges.
Cleaning the blower / suction tube
1. Remove the collection bag loop from
the hook.
2. Remove the fastening screws (see
B
No. 4) and pull off the blower / suction
tube.
3. Knock material out of the inside of the
tube and clean it as required.
4. Remount the tube and reattach the
collection bag loop to the hook.
Replacing the collection bag
Replace a defective collection bag. Employ
only original collection bags (see chapters
“Spare Parts”), otherwise the guarantee
claim is invalid.
Safekeeping
Keep the leaf blower in a dry, frost-free
location, which is inaccessible to chil-
dren.
Do not store the device in direct sunlight;
store it in dark or in reduced light condi-
tions.
Do not cover the device with nylon
bags, since moisture can form.
Clean the device thoroughly at the
season end and for storage during
wintering. Clean the collection bag by
removing it, emptying it and washing
with warm water and neutral soap. Re-
attach the dried bag again.
Ensure that all nuts, bolts and screws
are tightened so the equipment is in
safe, functional condition.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside FLB 2500 A1 - IAN 64605 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside FLB 2500 A1 - IAN 64605 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside FLB 2500 A1 - IAN 64605

Parkside FLB 2500 A1 - IAN 64605 User Manual - German, Dutch, French, Italian - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info