Manual Parkside FLB 2500 A1 - IAN 64605 (page 53 of 79) (English, Portuguese, Spanish)

595289

Zoom out

Zoom in

1/79

GB MT

You can vacuum up dry leaves and leaf parts

on the at with the at suction nozzle. The

guide rollers at the lower end of the tube

make it easier to guide the tube along the

ground.To protect the user, the appliance

can only be used with the blowing/suc-

tion pipe completely installed. The appli-

ance is double-insulated, and does not

need to be earthed.

Refer to the following descriptions for instruc-

tions on how the operating controls work.

Assembly instructions

Remove the power plug before all

work on the device. Employ only

original parts. Danger of injury.

Unpacking:

Unpack the device and check whether it is

complete:

5 Leaf blower motor part

2 Two-part blower/vacuum tube

18 Collection bag with bag holder nozzle

22 Flat nozzle

1 Carrying strap

3 + 4 Assembly material

Before putting the device into

operation, the blower / suction

tube must be completely mount-

ed and screwed tight and the

collection bag and carrying strap

must be attached. The impeller

wheel cover must be closed and

the attachment screws must be

tightened all the way.

Mounting of blower / suction tube:

Make sure the tubes are held

straight during mounting. The elec-

trical contacts in the tube could be

damaged.

1. Connect the two parts of the

blower / suction tube (2a + 2b).

The two parts of the tube engage,

whereupon they cannot be disen-

gaged for safety reasons.

2. Fasten down the tube sections

using the smaller enclosed

screws (3).

3. Insert the blower / suction tube

into the blower / suction open-

ing on the motor component (5).

Use the guide rail on the motor

component as an aid.

4. Fasten down the tube and motor

component using the larger en-

closed bolts and nuts (4).

Mount at suction nozzle:

5. To work with the at suction nozzle

(22), push it onto the suction opening

(23) on the tube until the lateral clips

engage.

To remove the nozzle, pull the clips on

the nozzle apart and pull the nozzle

out of the tube.

Mount collection bag:

6. Place the retainer frame (17) onto the

opening on the motor components

(5) so that the grip points towards the

mains cable. Press the retainer frame

over the engagement strip until the

coupling lever engages.

Suction operation is only per-

missible with the collection bag

mounted.

7. Connect the collection bag retainer

loop (19) to the blower / suction tube.

Mount carrying strap:

8. Hook the carrying strap (1) onto the

attachment bar (8).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside FLB 2500 A1 - IAN 64605 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside FLB 2500 A1 - IAN 64605

Parkside FLB 2500 A1 - IAN 64605 User Manual - German, Dutch, French, Italian - 70 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside FLB 2500 A1 - IAN 64605 Manual

Product: