779303

Parkside 339140 Manual

7
Zoom out
Zoom in
Previous page
1/36
Next page
and, in particular, areas where
there is paint and dust fog.
Specific safety
instructions
Q Changes as a result of technical
progress can be introduced
by the manufacturer without
prior notice and may not be
included in the Operating
Instructions.
Q Check the equipment before
putting it into service to see that
it is complete, functions properly
and is air tight!
Q Never put a defective or non-
functional piece of equipment into
service. Contact the manufacturer
or get the equipment checked by
a qualified technician.
Q Never stand on the equipment!
Q Hold the hose when unrolling
and rolling up so that the hose
cannot injure anyone while
swinging about.
Q Pay attention to the maximum
working pressure of the hose.
Only operate the hose within
the given parameters (see
Technical data).
Q At very low temperatures the
hose may become inflexible and
stiff. This can lead to problems
when rolling up!
Q Take care when the hose is mo-
ved it is not damaged by sharp
edges and objects.
Q Never store or put the hose in
a place where there is direct
sunlight.
Q Never use the hose to carry
dangerous liquids (chemicals,
acids, alkaline solutions, etc).
Q Turn off the air flow before
rolling up the hose.
Q Always work cautiously and
with the necessary care.
Q Never use excessive force.
Operation
Hold the hose when unrolling and rolling up
so that the hose cannot injure anyone while
swinging about.
Pay attention to the maximum working pressure
of the hose. Only operate the hose within the
given parameters (see Technical data).
1. Plug the connection hose into the compressor.
2. Slowly unroll the desired length of hose.
3. Connect the compressed air tool by means of the
fast coupling.
Fig. 1 Connect compressed air hose
4. Remove the tool from the hose after the work has
been completed by pulling the coupling back-
wards hard. Roll up the hose again when the job
is done.
8 GB/IE/NI
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside 339140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside 339140 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info