458602
162
Zoom out
Zoom in
Previous page
1/175
Next page
Appendix
980-001-0240B FrameSaver NP 110 Users Manual - Installation Guide A-5
November
2000
External
Set Test
External Set Test shows the highest priority externally initiated test currently running.
This is displayed on the Device Status / Test screen.
Frame Fault
Frame Fault shows the highest priority Frame Manager fault currently detected. This
is displayed on the System View, Device Status / Test screens, Frame Manager Statis-
tics Summary and ISDN Status / Test screens.
Table A-4 External Set Test
Display Description
Line Lp to Netw Full T1 Line loopback in place at Network Port toward Network Circuit.
Payld Lp to Netw Full T1 Payload loopback in place toward Network Circuit.
V54 User Lp to Netw Loopback is in place at the User Port toward the Network Circuit, in response to a V.54
LoopUp code from the Network (only if DS0s are assigned to the User Port.)
V54 Drop Lp to Netw Loopback is in place at the Drop Port toward the Network Circuit, in response to a V.54
LoopUp code from the Network (only if DS0s are assigned to the Drop Port.)
LL Lp to User Loopback is in place at the User Port toward the User Circuit, in response to an LL
(Local Loopback) signal at the User Port interface (only if DS0s are assigned to the
User Port.)
LL Lp to Drop Loopback is in place at the Drop Port toward the Drop Circuit, in response to an LL
(Local Loopback) signal at the Drop Port interface (only if DS0s are assigned to the
Drop Port.)
Table A-5 Frame Fault
Display Description
Clear Channel Frame Manager configured for and operating in Transparent mode.
LMI Netw Failure Invalid or no response to LMI Status enquiries toward Network.
LMI User Failure Invalid or no LMI Status requests from User equipment.
Netw Threshold Alarm Network Link Error Threshold (Data Frame Error Seconds) reached or exceeded.
User Threshold Alarm User Link Error Threshold (Data Frame Error Seconds) reached or exceeded.
PVC Drpd Mon Alarm PVC Dropped Monitor Packet Threshold reached or exceeded.
PVC Dlvd Mon Alarm Percentage of delivered packets for a PVC, has fallen below the PVC Dlvd Pkt
Threshold value.
PVC Delay Alarm PVC Delay Threshold reached or exceeded.
BECN/FECN Alarm BECN/FECN Error Threshold reached or exceeded.
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradyne FrameSaver NP 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradyne FrameSaver NP 110 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info