568707

Paradigm Soundtrack 2 System Manual

7
Zoom out
Zoom in
Previous page
1/22
Next page
BREAK-IN
Although your system will sound great ‘out of the carton’ it will sound
even better when broken in. Allow it to operate for several hours
before you listen critically.
CLEANING
Do not use strong or abrasive cleaners on your system. Gently wipe
the cabinets with a damp soft cloth.
PLACEMENT
Soundbar: On a credenza or shelf (Fig. 1a)
The soundbar must sit on a flat surface directly below your video
display. Supplied stability feet must be attached. See the Setup Guide
included for how to attach the feet.
Soundbar: On a wall
(Fig. 1b)
For more information, refer to the ‘Wall Mounting’ section.
Subwoofer: Positioned Vertically (Fig. 2a)
If using the subwoofer in the vertical position it must sit in the
supplied cradle.
Subwoofer: Positioned Horizontally (Fig. 2b)
If using the subwoofer in the horizontal position the supplied feet
must be attached to allow adequate clearance for heat dissipation.
Refer to the
Setup Guide included for how to attach feet.
IMPORTANT! WIRED SUBWOOFER CONNECTION ONLY
When positioning the subwoofer horizontally in a wired connection,
use the supplied 90° RCA adapter (Fig. 2b) to allow easier cable
hookup. The adaptor is not necessary in a wireless configuration.
Fig. 2b
Fig. 2a
Fig. 1b
Fig. 1a
EN
EN – 4
Aprendizaje de códigos
El sistema Sistema Soundtrack™ 2 es capaz de aprender ciertos
códigos de los controles remotos que usted ya posee, como el código
de volumen del control remoto de su televisor. Cada código se debe
programar por separado. Para programar, siga los pasos que se indican
a continuación.
1. Mantenga pulsado 3 segundos el botón de la interfaz de la barra
de sonido correspondiente a la función que desea programa
(por ej. volumen, silencio, encendido/apagado).
2. El LED de la Sistema Soundtrack™ 2 comienza a destellar para
indicar que el sistema está en modo de ‘aprendizaje IR’.
3. Apunte el control remoto de la fuente hacia el frente de la barra de
sonido y pulse el botón de la función correspondiente de dicho control.
El LED azul destella rápidamente 4 veces para indicar que el código
IR ha sido “aprendido” y luego vuelve a una luz azul permanente.
4. Repita desde el paso 1 para programar cada función.
NOTA: Para aprender un comando Silencio de un control remoto que
usted ya posee, pulse el botón Sync (Sincronismo) de la parte superior
de la barra de sonido 3 segundos y luego continúe con el paso 2
precedente.
NOTA: El control remoto de su decodificador de cable/satelital o el
control remoto de su televisor pueden usar un código que el sistema
Sistema Soundtrack™ 2 no puede aprender. En estos casos, deberá
usar el control remoto que viene con su sistema o un control remoto
universal o de aprendizaje.
CONEXIÓN
Para realizar una rápida instalación de la barra de sonido y el
subwoofer, consulte las instrucciones de la Guía de instalación.
INSTALACIÓN DE LA BARRA DE SONIDO
Consulte la Guía de instalación.
INSTALACIÓN DEL SUBWOOFER
(Mostrado) Panel trasero del
subwoofer. Consulte en la
pág. 8 una descripción de las
funciones numeradas.
1
2
3
4
ES
ES
ES – 7
Soundtrack_2_Manual_EN_FR_ES_PRINTER_SPREADS_REV4.indd 7-4 13-11-14 10:41 PM
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradigm Soundtrack 2 System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradigm Soundtrack 2 System in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Paradigm Soundtrack 2 System

Paradigm Soundtrack 2 System Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info