568708
15
Zoom out
Zoom in
Previous page
1/52
Next page
EN-14
No Subwoofer
If you are not using an external subwoofer, use the ‘UP’
arrow on the Soundscape’s menu panel to scroll to reach ‘SUB’
then use the ‘RIGHT
arrow to choose
‘INTERNL [INTERNAL].
Activate by pressing the ‘Select button and the Soundscape
will respond with ‘SET.
This sets the Soundscape to reproduce
the entire frequency range when playing music and movie content.
Adding an External Subwoofer
If desired, an external subwoofer in a wired or wireless capacity
can be used to reinforce low-frequency channel information
in multichannel and stereo recordings. For seamless system
matching, we recommend a Paradigm subwoofer, however any
brand of subwoofer can be connected.
Wired Subwoofer Connection
Using a high-quality RCA style cable, connect the ‘SUB Out
on the the Soundscape’s back panel to the ‘LFE In/Sub In on
the subwoofers back panel.
Using the ‘UP arrow on the Soundscape’s menu panel,
scroll through the options to reach ‘SUB’, then using the
‘RIGHT
arrow
scroll right, then ‘SCROLL UP to reach
‘WIRED’. Activate by pressing the ‘Select’ button and the
Soundscape will respond with ‘SET.
TIP! Reference your subwoofer’s Owners Manual to learn
how to properly adjust the subwoofer’s level and phase
controls to achieve proper blending with the Soundscape.
Wireless Subwoofer Connection
Wireless Subwoofer Receiver
We have included
a wireless subwoofer receiver in the box
with your Soundscape. This receiver is compatible with any
external Paradigm or other brand of subwoofer.
Preparing the external subwoofer for wireless operation.
1 If your Soundscape is not turned on, turn it on at this point.
2 Plug the wireless receiver into the ‘LFE/SUB In on
subwoofer.
3 Plug in the external subwoofer.
Syncing an External Subwoofer with
your Soundcape
1 Plug the wireless subwoofer receiver into a wall outlet.
DO NOT PRESS THE SYNC BUTTON TO INITIATE
SYNCING AT THIS POINT.
2 Via the remote control or the top panel, access the
Soundscape’s menu by pressing the ‘MENU’ button.
3 Using the ‘UP
arrow, scroll through the options to
reach ‘SUB’.
4 Press the ‘RIGHT
arrow and THEN scroll ‘UP through
the options to reach ‘WIRELES’ [WIRELESS].
5 Using the ‘Select’ button, select WIRELES’ [WIRELESS].
6 The Soundscape’s display will read ‘PAIRING STARTED.
This means the Soundscape is transmitting a wireless
signal. WITHIN the next 30 seconds, you must …
7 Press and hold for 3 seconds, the ‘Sync button on the rear
panel of the wireless receiver. Its blue light will blink rapidly
signalling it is ready to receive the Soundscape’s signal.
8 The wireless receiver’s LED will glow solid blue once it
receives the signal and the Soundscape’s display should
read ‘PAIRED’ (i.e. synced).
What to do if Pairing (syncing) Fails
If Pairing fails, it may be that too much time passed between
Steps 7 and 8 above. Repeat the pairing process by pressing
the ‘LEFT
arrow. Scroll back through the menu to WIRELES
[WIRELESS] mode and repeat Steps 5 through 8 (above) until
PAIRING is achieved.
If pairing is not achieved on the next try, check to see that the
Soundscape and receiver are within 50’ (15 m) of each other
and that there are no obstructions in this path. Check that
all equipment is plugged in and wall outlets are functional. If
pairing cannot be achieved, contact your Paradigm Dealer.
Wireless Subwoofer
Receiver Included
50’50’
Wireless Range
or 15 Meters
USING A SUBWOOFER
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradigm Soundscape at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradigm Soundscape in the language / languages: English, French as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Paradigm Soundscape

Paradigm Soundscape Quick start guide - English - 2 pages

Paradigm Soundscape Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info