Manual Paradigm Monitor 11 (page 20 of 68) (English)

569161

Zoom out

Zoom in

1/68

Standard Connection (See illustration on earlier page.)

Your speakers’ binding posts can be used with banana, pin or spade

connectors, as well as with bare wire. Tighten the posts firmly by hand but

do not over tighten!

Correct polarity (or phase) is critical for proper soundstage imaging and bass

performance. Connect one speaker at a time to ensure proper connection

of every channel. The red (+) amplifier terminal must be connected to the

red (+) speaker terminal. The same applies to the black (–) terminals.

Make sure all wires are firmly fastened. Repeat this connection procedure

for each speaker in your system.

NOTE: If you hear a distinct lack of bass and a dislocated stereo image then

one or more of your speakers may be connected out of phase (polarity is

reversed). Re-check to ensure that each speaker's cable is connected with

correct polarity: red (+) to red (+) and black (–) to black (–).

Other Connection Options

DO NOT attempt to bi-wire or bi-amplify speakers

unless you have removed the jumper bars.

Some Monitor Series 7 speakers have two sets of input terminals connected

externally with jumper bars. These speakers can be bi-wired or bi-amplified

to achieve even better performance.

If your speakers do not have two sets of input terminals this section does

not apply to you.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Paradigm Monitor 11 in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Paradigm Monitor 11 Manual

Product: