67799
66
Zoom out
Zoom in
Previous page
1/78
Next page
128
Receive Mode [1.6.2]
Sets up Push Message receiving.
- Accept All: Receives all Push messages.
- Accept None: Rejects all Push messages.
Go to URL [1.7]
Allows you to directly input and connect to the desired URL.
Profiles [1.8]
Selects or edits the Connection Profile supplied by the
phone.
Select the Profile List and press the [
o
] key for setup.
The Unedited Profile will not be selected.
Select the Profile List and press the [Edit] Soft key to edit a
profile.
- Profile Name: Pressing the [
o
] key allows you to enter the edit
mode to change a profile name.
- Home URL: Pressing the [
o
] key allows you to enter the edit
mode to edit the Homepage URL provided by the service
provider.
- Connection Type: Select either WAP or HTTP.
- GSM Settings: This menu allows you to set the GSM network
proxy, and has the following sub-menus:
- Gateway/Proxy: If you set the Connection Type for WAP,
Gateway appears. If you set it for HTTP, Proxy appears.
Pressing the [
o
] key allows you to access the sub-menus such
as IP Address, IP Port, Login ID and Password. For each sub-
menu, pressing the [
o
] button lets you enter edit mode to edit
every item provided by the service provider.
- Data Call Type: Use the left or right navigation key to select
from the two modes: ISDN and Analogue.
- Dial Number: Pressing the [
o
] key allows you to enter the edit
mode to change this item.
- Login ID: Pressing the [
o
] key allows you to enter the edit
mode to change this item.
- Password: Pressing the [
o
] key allows you to enter the edit
mode to change this item.
- GPRS Settings: This menu allows you to set the GPRS network
proxy, and it has the following sub-menus:
- Gateway/Proxy: If you set the Connection Type for WAP,
Gateway appears. If you set it for HTTP, Proxy appears.
Pressing the [
o
] key allows you to access the sub-menus such
as IP Address, IP Port, Login ID and Password. For each sub-
menu, pressing the [
o
] key lets you enter edit mode to edit
every item provided by the service provider.
- APN: It stands for Access Point Name. Pressing the [
o
] key
lets you enter the edit mode to change this item.
- Login ID: Pressing the [
o
] key lets you enter the edit mode to
change this item.
- Password: Pressing the [
o
] key lets you enter edit mode to
change this item.
- DNS Settings: Enter the IP address for the Domain Name Server.
You may enter primary and secondary DNS. This function is
available only when you are connected to HTTP.
- Bearer: This lets you select the bearer type for each type of
network access. Using the left or right navigation key allows you
to select from the two modes: GSM Only and GPRS Only.
- Reset Profile: Pressing the [
o
] key initializes the parameter
settings of a profile. You can select from Yes/No.
129
WAP WAP
NOTE:
The parameter settings are already entered as required by the
service provider. Care should be taken when you make any modification
to a profile since it may cause WAP to be inoperative.
060420_PG-3500_EN_REV06_출 2006.4.20 4:31 PM 페이지128
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pantech PG3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pantech PG3500 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info