492231
66
Zoom out
Zoom in
Previous page
1/69
Next page
129
128
TROUBLESHOOTING SAFETY
AND WARRANTY
“No Service” or “Network Failure,” displays
The network connection has been lost. You may be in a
weak signal area. Move and try again.
You are trying to access an option for which you have no
subscription with your service provider. Contact the
service provider for further details.
When call quality is poor:
End the phone call and try again.
When the other party cannot hear you speaking:
Your phone may have been set to Mute.
therefore, activate "UNMUTE" by pressing the ok key.
When battery lifetime becomes shorter than usual:
This may happen when you are in an area with low signal
strength.
Turn off your mobile phone when it is not in use.
Change the battery when the battery lifetime ends.
When your phone does not turn on:
Make sure your battery is charged. Check to see if your
phone works while recharging the battery.
When you are unable to send a message:
Either you have not been registered to receive the sms
service, or you may be out of the service range of your
network service provider.
To save the time and expense of an unnecessary service call,
perform the simple checks in this section before contacting a
service professional.
When you switch on your phone, the following messages
may appear:
“Insert UIM”
Be sure that the UIM card is correctly installed.
“Phone lock”
The automatic locking function has been enabled.
You must enter the phone’s password before you can use
the phone.
“Enter PIN”
You are using your phone for the first time. You must en
ter the PIN supplied with the UIM card.
The PIN Check feature is enabled. Every time the phone is
switched on, the PIN has to be entered. To disable this
feature, use the PIN check menu.
“Enter PUK”
The PIN code has been entered incorrectly three times in
succession, and the phone is now blocked. Enter the PUK
supplied by your service provider.
SAFETY
AND WARRANTY
TROUBLESHOOTING
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pantech PC7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pantech PC7100 in the language / languages: English as an attachment in your email.

The manual is 5,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info