636582
10
Zoom out
Zoom in
Previous page
1/182
Next page
02
03
04
05
06
07
01
16
17
INSTALL BATTERY
1. Insert your nger tip into the slot (1), then push down on
top of the battery cover and slide it o to remove (2).
2. Slide the battery into the slot (3) by aligning the contacts
and press down (4) until you hear the click.
3. Align the cover tabs with the slots on the back of the
device and slide the battery cover onto the unit until it
snaps into place.
If the battery is not correctly placed in the compartment,
the handset will not turn on and/or the battery may detach
during use.
REMOVE BATTERY
1. To remove the battery cover, insert your nger tip into
the slot (1), then push down on top of the battery cover
and slide it o (2).
Caution:Do not expose to high temperature
(140/60). Do not disassemble .
Do not allow metal objects to contact or short
circuit the battery terminals. Do not incinerate
or expose to fire. To dispose of properly
(Ex:Recycling number 1-800-822-8837)
Attention: Ne pas exposer a des tempeatures
élevées (140/60). Ne pas démonter . Ne pas
laisser des objets métaliques venir en contact
avec les bornes de pile ni les court-circuiter.
Ne pas incinérer ni faire brûler.
Pour mettre au rebut adéquatement
(Ex:numéro de recyclage 1-800-822-8837)
Cuidado: No exponga a alta temperatura (140
/60). No desensamble. No permita que
objetos de metal entren en contacto o hagan
cortocircuito con los terminales de la batería.
No incinere ni exponga al fuego. Para eliminar
en forma adecuada (Por ejemplo:Número de
reciclaje 1-800-822-8837)
A
ttenti
Att
e
n
t
io
n:
Ne pa
s
e
x
p
oser
a
des tempeatu
res
14
0
/
60 ). Ne pas démonter. Ne pas
venir en conta
ct
Correct Incorrect
Correct Incorrect
2. Insert your ngernail into the slot (3) and lift the battery
from the compartment (4).
3. Align the cover tabs with the slots on the back of the
device and slide the battery cover onto the unit until it
snaps into place.
CHARGING YOUR BATTERY
1. Connect the USB data cable into the cableless wall
adapter.
2. Plug the USB data cable into the phones Charging/
Data Jack (making sure to align the connector as it
appears in the image to the right) and the wall
adapter end into an electrical outlet.
If the battery connector is not properly aligned, damage could occur to the charging
connector and the phone may not charge.
3. To remove the Wall Charger, pull the charger from the
device.
Correct Incorrect
Correct Incorrect
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pantech Jest at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pantech Jest in the language / languages: English, Spanish as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info