813568
10
Zoom out
Zoom in
Previous page
1/40
Next page
10
11
WALL INSTALLATION
1. Remove the mounting plate (3) from the device by turning it anti-clockwise
(#A).
2. Hold the mounting plate (3) against the desired surface, and mark the holes
with a pencil. When you are sure, drill the holes in the desired positions
3. Fasten the mounting plate (3) with the supplied screws + dowels (#B).
4. Align the arm of the device with the opening on the mounting plate. Turn the
rotary knob clockwise again to tighten and fix in place (#C).
5. Important: Make sure that you always align the solar panel toward the
source of solar radiation! Swing the swivel arm (2) to receive the light as
needed (#D).
USING WITH THE GROUND STAKE
1. The mounting plate (3) must be attached to the device.
2. First insert the ground stake tip into the ground. Pay attention to the type of
ground. If the ground is too hard, this can damage the ground stake (#E).
3. Now attach the top part (upper part of the ground stake) to the top of the
ground stake (#F).
4. Place the mounting plate (3) on the ground stake and carefully attach it
(#G).
5. Now align the solar panel. Important: Make sure that you always align the
solar panel toward the source of solar radiation! Swing the swivel arm (2)
to receive the light as needed (#H).
USE
Important: Before using the device for the first time, expose it to direct
sunlight for at least 6-10 hours to charge it. If there is insufficient
sunlight, the battery may take longer to charge.
As soon as it gets dark, the light switches on automatically when movement
is detected. The light stays on for 30 seconds, and turns off when motion is
no longer detected.
The solar light does not turn on in daylight. The battery will be charged
during this time.
Similarity to a surveillance camera (#I): Once the switch is in the MOTION
M34403_PantaSafeLightSolar PRO_Manual_105x140mm_20220914_MM.indd 10M34403_PantaSafeLightSolar PRO_Manual_105x140mm_20220914_MM.indd 10 14.09.22 10:3514.09.22 10:35
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panta M34912 SafeLight Solar PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panta M34912 SafeLight Solar PRO in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info