550977

Panasonic WV-SC588 Manual

12
Zoom out
Zoom in
Previous page
1/228
Next page
– when the subject passes by other moving objects
– when the target moves too fast or too slow
– when the camera is shaking
• When the zoom ratio is set to the “Tele” side, it may be difficult to obtain accuracy with the auto
tracking function. It is recommended to use the auto tracking function with setting the zoom
ratio to the “Wide” side.
• During auto tracking, if the camera is operated using the control pad or by other methods, or if
an alarm occurs, auto tracking is stopped.
• Auto pan: Automatically pans between the start position and the end position set in advance
(®page 109).
Even when the camera is operated for zooming or focusing, the camera continues panning.
(However, panning will stop when the zoom button (x1) is clicked.)
• Preset sequence: Automatically moves to the preset positions (®page 106) orderly (start from the
lowest preset position number).
• 360 map-shot: Moves 45° horizontally at a time and repeats 8 times to shoot images of each 45°
position (45° x 8 = 360°), and then displays 8 thumbnail images of each 45° position (45° x 8 = 360°)
on a newly opened window. When a thumbnail image is clicked, the camera moves to the respective
position and live images will be displayed on the “Live” page.
• Preset map-shot: 8 thumbnail images of the preset position 1-8 (®page 106) will be displayed orderly
on a newly displayed window. When a thumbnail image is clicked, the camera moves to the respective
position and live images will be displayed on the “Live” page.
Note
• Do not operate the browser until all the thumbnail images are displayed and the camera returns to
the original position (where the camera was when “360 map-shot” or “Preset map-shot” was carried
out).
• When “360 map-shot” is carried out while the camera is moving (panning/tilting), images captured
while panning/tilting may be displayed as the thumbnail display. In this case, stop the current
operation and carry out “360 map-shot” again.
• When “Preset map-shot” is carried out with an unregistered preset position (among preset position
1-8), the thumbnail image of the preset position before the unregistered preset position will be
displayed.
In this case, the camera will not move when the thumbnail image is clicked.
• The camera will not always return to the exactly same position where it was before “360
map-shot” or “Preset map-shot” was carried out. (It may sometimes be slightly different.)
• The window on which the thumbnail images are displayed will close when clicking the following
buttons that can switch the camera channel or reload images: [Live], [Multi-screen], [H.264],
[JPEG], [Stream], [Image capture size], [Image quality], [Setup].
To display the thumbnail images again, carry out “360 map-shot” or “Preset map-shot” again.
• Patrol 1-4: Performs patrols 1-4 that were set in advance. (®page 111)
Control pad/buttons
*2
Left-click on the control pad or buttons to adjust the horizontal/vertical position of the camera (panning/
tilting). Panning/tilting speed will be faster if a clicked point gets farther from the center point of the control
pad. When the tilt reaches a certain angle, the image is automatically turned upside-down (digital flip
function).
It is also possible to pan/tilt the camera by dragging the mouse.
Zoom and focus can be adjusted by right-clicking. When an upper/lower area of the control pad is
right-clicked, the displayed image will be zoomed in/out on. When a left/right area is right-clicked, the focus
will be adjusted to the Near/Far side.
Zoom can also be adjusted using the mouse wheel.
[Brightness] buttons
*2
Available range: 0 - 255
12 Operating Instructions
1 Monitor images on a PC
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic WV-SC588 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic WV-SC588 in the language / languages: English as an attachment in your email.

The manual is 13,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic WV-SC588

Panasonic WV-SC588 User Manual - German - 234 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info