550986
203
Zoom out
Zoom in
Previous page
1/244
Next page
The wireless settings can be manually configured to the camera in this section, and the camera can be
connected to the wireless network.
1. Check the wireless router's setting information.
Check the SSID and wireless security settings configured to your wireless router, and whether MAC
address filtering is activated or deactivated.
If MAC address filtering is activated, register the camera’s MAC address to the wireless router. You
can check the camera’s MAC address from the sticker attached to the camera or from the MAC address
displayed in “Mac address of the wireless module” (®page 210).
2. Set each item of [Wireless: Basic settings].
[SSID]
Enter the SSID (network identification name). The SSID must be entered. (SSID is also called ESSID.)
Available number of characters: 1 - 32 characters
Available characters: Alphanumeric characters and spaces.
Entries are case sensitive.
Default: wifi
[Communication mode]
Select the same communications mode that is used by the wireless router that the camera will to be
connected to.
802.11b/g: Wireless routers that support either 802.11b or 802.11g can be connected to.
802.11n/b/g [ShortGI disabled]: Wireless routers that support 802.11n, 802.11b, or 802.11g can be
connected to.
802.11n/b/g [ShortGI enabled]: Wireless routers that support 802.11n, 802.11b, or 802.11g can be
connected to.
When 802.11n/b/g [ShortGI enabled] is selected, if 802.11n transmission is used, the transmission
packet intervals become shorter and the transmission speed increases. However, because the camera
becomes susceptible to interference (echoes, reflections, etc.) arriving with propagation delay, the
camera and wireless router should be used at short distances from each other.
Operating Instructions 203
18 Use the camera on a wireless LAN [Wireless] (SW174W only)
203


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-wv-sc384

Reset search

  • What will happen when Viewnetcam service ends in March 2024? Submitted on 1-11-2023 at 06:38

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic WV-SC384 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic WV-SC384 in the language / languages: English as an attachment in your email.

The manual is 8,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic WV-SC384

Panasonic WV-SC384 User Manual - German - 248 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info