Manual Panasonic WV-SC384 (page 170 of 244) (English)

550986

170

Zoom out

Zoom in

1/244

UPnP

This camera support UPnP (Universal Plug and Play). By using the UPnP function, it becomes possible to

configure the following automatically.

• Configuration of the port forwarding function of the router (However, a router supporting UPnP is required.)

This configuration is useful when accessing the camera via the Internet or from a cellular phone/mobile

terminal.

• Automatic refreshment of the shortcut to the camera that is created on the [My Network Places] folder

([Network] folder when using Windows Vista or Windows 7) of the PC even when the IP address of the

camera changes.

[Auto port forwarding]

Select “On” or “Off” to determine whether or not to use the port forwarding function of the router.

To use the port forwarding function, the router in use must support UPnP and the UPnP must be enabled.

• Default: Off

Note

• Due to port forwarding, the port number may sometimes be changed. When the number is changed,

it is necessary to change the port numbers registered in the PC and recorders, etc.

• The UPnP function is available when the camera is connected to the IPv4 network. IPv6 is not

supported.

• To check if auto port forwarding is properly configured, click the [Status] tab on the “Maintenance” page,

and check that the “Enable” is displayed for “Status” of “UPnP”. (®page 218)

When “Enable” is not displayed, refer to “Cannot access the camera via the Internet.” in the

“23 Troubleshooting” section. (®page 231)

[Camera short cut]

Select whether or not to create the shortcut to the camera on the [My Network Places] folder ([Network] folder

when using Windows Vista or Windows 7) of the PC. When creating the shortcut, select “On”.

To use the shortcut function to the camera, enable the UPnP function on the PC in advance.

• Default: Off

Note

• To display the shortcut to the camera on the [My Network Places] folder ([Network] folder when using

Windows Vista or Windows 7) of the PC, it is necessary to add the Windows component. Refer to the

following to enable the UPnP function.

For Windows XP

[Start] ® [Settings] ® [Control Panel] ® [Add or Remove Programs] ® [Add/Remove Windows

Components] ® select [Networking Services] ® [Details] ® check [Internet Gateway Device Discovery

and Control Client] and [UPnP User Interface] ® [OK] ® [Next] ® Complete

For Windows Vista

[Start] ® [Control Panel] ® [Network and Internet] ® [Network and Sharing Center] ® expand the

section of [Network discovery] of [Sharing and Discovery] ® select [Turn on network discovery] ® click

[Apply] ® Complete

For Windows 7

[Start] ® [Control Panel] ® [Network and Internet] ® [Network and Sharing Center] ® select [Turn on

network discovery] of [Network discovery] of [Change advanced sharing settings] ® click [Save

changes] ® Complete

HTTPS

It is possible to enhance the network security by encrypting the access to cameras using the HTTPS function.

Refer to page 174 for how to configure the HTTPS settings.

170 Operating Instructions

17 Configuring the network settings [Network]

What will happen when Viewnetcam service ends in March 2024? Submitted on 1-11-2023 at 06:38
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic WV-SC384 in the language / languages: English as an attachment in your email.

The manual is 8,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic WV-SC384

Panasonic WV-SC384 User Manual - German - 248 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic WV-SC384 Manual

Product: