550986
137
Zoom out
Zoom in
Previous page
1/244
Next page
Select an action to be taken when a terminal alarm 2 is detected from the following.
Off: Does not take any action even when a terminal alarm 2 is detected.
1-64
SW395
SW395
SC385
SC385
SC384
SC384
SW175
SW175
SW174W
SW174W
SW172
SW172
ST165
ST165
ST162
ST162
: When the registered
preset position is selected, the camera will move to the selected preset position when a terminal alarm 2
is detected.
Auto track
SW395
SW395
SC385
SC385
: When a terminal alarm 2 is detected, the camera will start the auto tracking.
1-256
SW396
SW396
SC386
SC386
: If a previously registered preset position is selected, when a terminal alarm 2 is
detected, the camera will move to that position.
Auto track
SW396
SW396
SC386
SC386
: When a terminal alarm 2 is detected, the camera will start the auto tracking.
Patrol 2
SW396
SW396
SC386
SC386
: When a terminal alarm 2 is detected, the camera will start the patrol.
* If Patrol 2 is not registered it is not displayed on the screen.
Default: Off
[Terminal alarm 3]
Select an action to be taken when a terminal alarm 3 is detected from the following.
Off: Does not take any action even when a terminal alarm 3 is detected.
1-64
SW395
SW395
SC385
SC385
SC384
SC384
SW175
SW175
SW174W
SW174W
SW172
SW172
ST165
ST165
ST162
ST162
: When the registered
preset position is selected, the camera will move to the selected preset position when a terminal alarm 3
is detected.
Auto track
SW395
SW395
SC385
SC385
: When a terminal alarm 3 is detected, the camera will start the auto tracking.
1-256
SW396
SW396
SC386
SC386
: If a previously registered preset position is selected, when a terminal alarm 3 is
detected, the camera will move to that position.
Auto track
SW396
SW396
SC386
SC386
: When a terminal alarm 3 is detected, the camera will start the auto tracking.
Patrol 3
SW396
SW396
SC386
SC386
: When a terminal alarm 3 is detected, the camera will start the patrol.
* If Patrol 3 is not registered it is not displayed on the screen.
Default: Off
[VMD alarm]
Select an action to be taken when a VMD alarm is detected from the following.
Off: Does not take any action even when a VMD alarm is detected.
1-64
SW395
SW395
SC385
SC385
SC384
SC384
SW175
SW175
SW174W
SW174W
SW172
SW172
ST165
ST165
ST162
ST162
: When the registered
preset position is selected, the camera will move to the selected preset position when a VMD alarm is
detected.
Auto track
SW395
SW395
SC385
SC385
: When a VMD alarm is detected, the camera will start the auto tracking.
1-256
SW396
SW396
SC386
SC386
: If a previously registered preset position is selected, when a terminal alarm 1 is
detected, the camera will move to that position.
Auto track
SW396
SW396
SC386
SC386
: When a VMD alarm is detected, the camera will start the auto tracking.
Patrol 1
SW396
SW396
SC386
SC386
: When a VMD alarm is detected, the camera will start the patrol.
* If Patrol 1 is not registered it is not displayed on the screen.
Default: Off
[Command alarm]
Select an action to be taken when a command alarm is detected from the following.
Off: Does not take any action even when a command alarm is detected.
1-64
SW395
SW395
SC385
SC385
SC384
SC384
SW175
SW175
SW174W
SW174W
SW172
SW172
ST165
ST165
ST162
ST162
: When the registered
preset position is selected, the camera will move to the selected preset position when a command alarm
is detected.
Auto track
SW395
SW395
SC385
SC385
: When a command alarm is detected, the camera will start the auto tracking.
1-256
SW396
SW396
SC386
SC386
: If a previously registered preset position is selected, when a terminal alarm 1 is
detected, the camera will move to that position.
Auto track
SW396
SW396
SC386
SC386
: When a command alarm is detected, the camera will start the auto tracking.
Patrol 1
SW396
SW396
SC386
SC386
: When a command alarm is detected, the camera will start the patrol.
Operating Instructions 137
13 Configure the alarm settings [Alarm]
137


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-wv-sc384

Reset search

  • What will happen when Viewnetcam service ends in March 2024? Submitted on 1-11-2023 at 06:38

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic WV-SC384 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic WV-SC384 in the language / languages: English as an attachment in your email.

The manual is 8,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic WV-SC384

Panasonic WV-SC384 User Manual - German - 248 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info