550986
90
Zoom out
Zoom in
Previous page
1/244
Next page
H.264: H.264 will be set for the video encoding format. The subsequent setting items will be for H.264.
(®page 82) The tab name will be changed to [JPEG/H.264].
MPEG-4: MPEG-4 will be set for the video encoding format. The subsequent setting items will be for
MPEG-4.
The tab name will be changed to [JPEG/MPEG-4].
Default: H.264
MPEG-4(1) / MPEG-4(2)
[MPEG-4 transmission]
Select “On” or “Off” to determine whether or not to transmit MPEG-4 images.
On: Transmits MPEG-4 images.
Off: Does not transmit MPEG-4 images.
Default: On
IMPORTANT
When “4:3 (800x600)”
*1
or “16:9” is selected for “Aspect ratio”, MPEG-4 transmission is unavailable.
When “H.264” is selected for “Recording format”, MPEG-4 transmission is unavailable.
Note
When “On” is selected for “MPEG-4 transmission” in “MPEG-4(1)” or “MPEG-4(2)”, displaying of
MPEG-4 images or JPEG images on the “Live” page will be available.
When “On” is selected for “MPEG-4 transmission” in “MPEG-4(1)” and “MPEG-4(2)”, MPEG-4 images
are viewable using other devices with each setting.
When “On” is selected for “MPEG-4 transmission” in “MPEG-4(1)” or “MPEG-4(2)”, the transmission
interval of JPEG images may be longer.
[Internet mode (over HTTP)]
Select “On” when transmitting MPEG-4 images via the Internet. It is possible to transmit MPEG-4 images
without changing the broadband router settings configured for JPEG image transmission.
On: MPEG-4 images and audio will be transmitted using the HTTP port. Refer to page 169 for further
information about the HTTP port number settings.
Off: MPEG-4 images and audio will be transmitted using the UDP port.
Default: Off
Note
When “On” is selected, only “Unicast port (AUTO)” will be available for “Transmission type”.
When “On” is selected, it may take seconds to start displaying MPEG-4 images.
When “On” is selected, MPEG-4 images may not be displayed depending on the number of the
concurrent access users and audio data availability, etc.
When “On” is selected, only IPv4 access is available.
[Image capture size]
Select “QVGA” or “VGA” for the image capture size of MPEG-4 images.
Default:
MPEG-4(1): VGA
MPEG-4(2): VGA
[Transmission priority]
Select a transmission priority for MPEG-4 images from the following.
Constant bit rate: MPEG-4 images will be transmitted with the bit rate selected for “Max bit rate (per
client)*”.
90 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]
90


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-wv-sc384

Reset search

  • What will happen when Viewnetcam service ends in March 2024? Submitted on 1-11-2023 at 06:38

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic WV-SC384 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic WV-SC384 in the language / languages: English as an attachment in your email.

The manual is 8,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic WV-SC384

Panasonic WV-SC384 User Manual - German - 248 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info