550986

Panasonic WV-SC384 Manual

59
Zoom out
Zoom in
Previous page
1/244
Next page
SD memory card
[SD memory card]
Select “Use” or “Not use” to determine whether or not to use the SD memory card.
• Default: Use
IMPORTANT
• Select “Not use” when operating without an SD memory card.
• When the setting is changed between “Use” and “Not use” while another user is during operation, the
operation will be canceled.
• After inserting the SD memory card, it is necessary to select “Use” to use the SD memory card.
• When playing or downloading images saved on the SD memory card, it is necessary to select “On” for
“Save logs” on the [Log] tab (®page 73) in advance.
• When the image refresh interval is short, notification/recording timing or interval may become incorrect.
Notification/recording may also not be performed correctly as configured when multiple users are
receiving images. In this case, set the refresh interval longer.
• There are limited times to overwrite on an SD memory card. When having a high frequency of
overwriting, the lifetime of the SD memory card may become shorter.
• A lifetime of an SD memory card should be influenced by the number of the image files stored and log
savings on the SD memory card. Selecting H.264 for “Recording format” can reduce the number of
files to be stored on the SD memory card.
• The data writing speed will go down after data are repeatedly written down on an SD memory card.
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
SC384
SC384
:
• Before removing the SD memory card from the camera, it is necessary to select “Not use” first.
SW175
SW175
SW172
SW172
ST165
ST165
ST162
ST162
:
• To remove the SD memory card, press the FUNCTION button and remove the SD memory card after
the FUNCTION indicator turns off.
• Refer to the installation guide for further information about inserting and removing an SD memory card
from the camera.
[Recording format]
Select “JPEG” or “H.264” for the video encoding format of image data to be recorded on the SD memory card.
• JPEG: Records still image data.
• H.264: Records video data in the MP4 video encoding format. Audio will not be recorded.
• Default: JPEG
Note
• When “H.264” is selected, it will become impossible to transmit images with the settings of MPEG-4 or
H. 264(2).
• When “H.264” is selected, the settings for “H.264(2)” on the [JPEG/H.264] tab of the “Image/Audio”
page will be changed to the settings for “H.264 recording”.
• When the setting value of “Video encoding format” on the [JPEG/H.264] tab of the “Image/Audio” page
is changed from “H.264” to “MPEG-4”, the setting value of “Recording format” will automatically be
changed to “JPEG”.
• When “H.264” is selected, the priority band may not be maintained if “H.264/MPEG-4(2)” is selected
for “Priority stream” - “Stream type” on the [System] tab of the “User mng.” page.
• When using the SD memory recording function of a Panasonic network disk recorder, select “JPEG”
for “Recording format”.
• When the setting of “Recording format” is changed between “JPEG” and “H.264”, format the SD
memory card. (®page 63)
• Due to the difference in file formats, the indication of remaining capacity of the SD memory card differs
between the cases when “JPEG” is selected and when “H.264” is selected for “Recording format”.
Operating Instructions 59
10 Configure the basic settings of the camera [Basic]
… 59 …


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-wv-sc384

Reset search

  • What will happen when Viewnetcam service ends in March 2024? Submitted on 1-11-2023 at 06:38

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic WV-SC384 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic WV-SC384 in the language / languages: English as an attachment in your email.

The manual is 8,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic WV-SC384

Panasonic WV-SC384 User Manual - German - 248 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info