558794
139
Zoom out
Zoom in
Previous page
1/160
Next page
139
LSQT0969
Troubleshooting
Others
With a computer (Macintosh)
Problem Check points
An image that should
have been recorded does
not appear when
DVD-MovieAlbumSE is
started.
Click the [Preference] button at top right of
DVD-MovieAlbumSE screen, click the [Device setting] tab
to choose the drive where the disc is loaded in the
[Drive Select] column, and then click [OK].
DVD-RW (Video format)
or DVD-R cannot be
played back on
DVD-MovieAlbumSE.
DVD-MovieAlbumSE does not support playback or data
read of DVD-RW (Video format) or DVD-R. Use optional-
user provided DVD-Video playback software to play back
DVD-RW (Video format) or DVD-R on the computer.
The DISC EJECT lever
does not work when the
unit is connected to the
computer.
The DISC EJECT lever does not work after the unit is
connected to the computer. Use Windows Explorer to right-
click the drive icon and execute [Eject]. Or use the
software’s eject button to eject the disc.
After files are exported from DVD-MovieAlbumSE, a
confirmation message is displayed about ejecting the disc.
Select [Eject the disc being used.].
Cannot write to DVD-
RAM.
Cannot format a disc with
the DVD-RAM Driver.
(Windows XP only) Deleting the unit name from the Device
Manager and then connecting the unit and the computer
again can improve this. Follow the steps below. Before
proceeding, be sure to remove the disc from the unit.
1) Select [start] # ([Settings] #) [Control Panel] # 
([Performance and Maintenance] #) [System].
2) Click the [Hardware] tab, then click [Device Manager].
3) Right click [MATSHITA DVD-RAM LMXK1931 USB Device]
displayed at [DVD/CD-ROM drives] and then select
[Uninstall].
4) When erasing is complete, reboot the computer. The
computer will automatically recognize the unit again.
When the USB cable is
disconnected, an error
message will appear on
the computer.
To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions on the
screen.
Problem Check points
Even if connected by the
USB cable, this unit is not
recognized by the
computer.
Have you set this unit to the correct mode?
# The unit is not recognized if it is set to recording mode.
# Disconnect the USB cable, set [USB FUNCTION] to
[PC CONNECT] and then reconnect the USB cable.
Select another USB terminal on the computer.
Check the operating environment. (l 116)
Turn on the power to this unit.
D200(P_PC)eng.book 139 ページ 2006年1月18日 水曜日 午後5時46分
139


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic VDR-D100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic VDR-D100 in the language / languages: English as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info