597886
20
Zoom out
Zoom in
Previous page
1/33
Next page
20
Troubleshooting
Troubleshooting (Basic)
Follow the instructions below when a problem has occurred. There is also an advanced
troubleshooting guide in the “Reference Manual”. For a software problem, refer to the software’s
instruction manual. If the problem persists, contact Panasonic Technical Support. You can also check
the computer’s status in the PC Information Viewer
(è Reference Manual “Troubleshooting (Advanced)”).
Starting Up
Cannot start up.
The power indicator or
battery indicator is not
lit.
Connect the AC adaptor.
Remove the AC adaptor, and then connect it again.
If a device is connected to the USB port, disconnect the device, or set
[USB Port] or [Legacy USB Support] to [Disabled] in the [Advanced]
menu of the Setup Utility.
Check the [UEFI Boot] setting of the Setup Utility. [UEFI Boot] should
be set to [Enabled].
You have forgotten the
password.
Supervisor Password or User Password: Contact Panasonic Technical
Support.
Administrator password:
If you have a password reset disk, you can reset the administrator
password. Set the disk and enter any wrong password, then follow
the on-screen instructions and set a new password.
If you do not have a password reset disk, reinstall (è page 15) and set
up Windows, and then set a new password.
“Remove disks or other
media. Press any key
to restart” or a similar
message appears.
If a device is connected to the USB port, disconnect the device, or set
[USB Port] or [Legacy USB Support] to [Disabled] in the [Advanced]
menu of the Setup Utility.
If the problem persists after removing the disk, it may be a flash
memory failure. Contact Panasonic Technical Support.
Windows startup and
operation is slow.
Start the Setup Utility (è Reference Manual “Setup Utility”) to
return the Setup Utility settings (excluding the passwords) to the
default values. Start the Setup Utility and make the settings again.
(Note that the processing speed depends on the application software,
so this procedure may not make Windows faster.)
If you installed a resident software after purchase, turn off the
residence.
The date and time are
incorrect.
Make the correct settings.
Perform either of the following procedures.
Long touch at the bottom left corner of the desktop screen.
Slide up from the middle of the Start screen with a finger.
Touch [Control Panel].
Touch [Clock, Language, and Region] - [Date and Time].
If the problem persists, the internal clock battery may need to be
replaced. Contact Panasonic Technical Support.
When the computer is connected to LAN, check the date and time of
the server.
The 2100 A.D. or later year will not be correctly recognized on this
computer.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic UT-MA6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic UT-MA6 in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info