560002
72
Zoom out
Zoom in
Previous page
1/76
Next page
Frequently Asked Questions
72
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer for assistance.
Block noise, frozen or disappearing image occurs in DVB mode / White spots or shadow image (ghosting) occurs in
Analogue mode/ Some channels cannot be tuned
t
Check the position, direction and connection of the aerial.
t
Check [Signal Condition](p.38). If [Signal Quality] is displayed in red, the DVB signal is weak.
t
Weather conditions will affect signal reception (heavy rain, snow, etc.), in particular in poor reception areas. Even during
good weather, the high pressure can cause poor reception of some channels.
t
Due to the digital reception technologies involved, quality of the digital signals may be relatively low in some cases,
despite good reception of analogue channels.
t
Turn the TV off with the Mains power On / Off switch, and then on again.
t
If problem persists, consult your local dealer or service provider for the availability of services.
No programmes shown on TV Guide
t
Check the digital transmitter.
t
Adjust the direction of the aerial to another transmitter installed nearby.
t
Check the analogue broadcast. If the image quality is poor, check the aerial and consult your local dealer.
Neither image nor sound is produced
t
Is the TV in AV mode?
t
Check the correct input mode is selected.
t
Check the mains lead is plugged into the socket outlet and the TV is turned on.
t
Check the Picture Menu (p.27,28) and volume.
t
Check all required cables and connections are firmly in place.
Auto aspect
t
Auto aspect is designed to provide you with the best ratio to fill the screen. (p.68)
t
Press the ASPECT button if you would like to change the aspect ratio manually. (p.17)
Black and white picture
t
Check that the output of the external equipment matches the input of the TV.
When connecting with SCART, ensure the output setting of the external equipment is not S-Video.
Input mode, i.e. EC/AV1 remains on the screen
t
Press the button to clear these.
Press again to redisplay.
Q-Link function does not work
t
Confirm SCART cable and connection.
Also set [AV1 out] in the Setup Menu.
(p.30)
[VIERA Link] function does not work and an error message appears
t
Confirm the connection. (p.57,58)
t
Turn the connected equipment on and then switch the TV on. (p. 60)
Recording does not start immediately
t
Check the settings of the recorder. For details, read the manual of the recorder.
There may be red spots, blue spots, green spots and black spots on the screen
t
This is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel is built with very high
precision technology giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a
fixed point of red, green, blue or black.
Please note this does not affect the performance of your LCD.
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TXL37U3E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TXL37U3E in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TXL37U3E

Panasonic TXL37U3E User Manual - German - 76 pages

Panasonic TXL37U3E User Manual - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info