502193
101
Zoom out
Zoom in
Previous page
1/128
Next page
Link Functions (Q-Link / VIERA Link)
101
Reduce unnecessary power consumption in Standby [Standby Power Save]
Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 49)
The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronisation
with the TV on / off state to reduce the consumption.
When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power
consumption of the connected equipment is automatically minimised.
When the TV is turned on, the connected equipment is still in Standby mode, but the power consumption is increased
to make startup time fast.
This function is effective if the connected equipment can change the power consumption in Standby mode and is set
to higher consumption.
Auto standby for unnecessary equipment [Intelligent Auto Standby]
Set Intelligent Auto Standby [On (With reminder)] or [On (No reminder)] in the Setup Menu to use this function
[Intelligent Auto Standby] (p. 49)
When the TV is on, non-watched or non-used connected equipment goes into Standby mode automatically to reduce
the power consumption. For example, when the input mode is switched from HDMI, the connected equipment will go
into Standby mode / or when Speaker Selection is changed to [TV] (except for watching a disc).
If you select [On (With reminder)], the on-screen message will be displayed before the connected equipment turns to
standby.
This function may not work properly depending on the connected equipment. If required, set to [Off].
Direct TV Recording - What you see is What you record [Direct TV Rec]
Records the current programme in the DIGA Recorder immediately.
If you connect a variety of recorders including other manufacturers’ recorders at the same time, connect the DIGA
Recorder to the TV’s lower HDMI terminal number. For example, if you use HDMI1 and HDMI2 for two recorders,
connect the DIGA Recorder to HDMI1.
If you cannot operate, check the settings and the equipment.
“Summary of Q-Link and VIERA Link features” (p. 97, 98), “Preparations” (p. 100)
To record the programme which DIGA Recorder does not support, SCART connection is required and the programme
is recorded by Q-Link function (p. 99).
Depending on the programme, SCART connection may be required to record.
You can change channel or turn the TV off while the recorder is recording from its own tuner.
You can not change channel while the recorder is recording from the TV tuner.
1
Display [VIERA TOOLS] and select [VIERA Link]
VIERA Link
select
access
2
Select [Direct TV Rec] and start recording
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Start
Home Cinema
Recorder
Start
select
access / start
You can also start recording directly when the code of the remote
control is “73” (p. 35).
(When USB HDD / SD Card for recording is connected in
DVB mode, [One Touch Recording] starts.)
To stop recording
Select [Stop] in [Direct TV Rec]
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Stop
Home Cinema
Recorder
Start
select
access / stop
You can also stop recording directly.
Unlock the tuner
Tuner Locked
Press EXIT to unlock and stop recording
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-P50VT50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-P50VT50 in the language / languages: English as an attachment in your email.

The manual is 5,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-P50VT50

Panasonic TX-P50VT50 User Manual - English - 56 pages

Panasonic TX-P50VT50 User Manual - German - 124 pages

Panasonic TX-P50VT50 User Manual - Dutch - 56 pages

Panasonic TX-P50VT50 User Manual - Dutch - 124 pages

Panasonic TX-P50VT50 User Manual - Polish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info