672184
73
Zoom out
Zoom in
Previous page
1/100
Next page
Using Network Services
(DLNA / VIERA CAST)
Advanced
73
WPS(Push button)
WPS(Push button)
1) Please press the ‘WPS’ buttton on the access
point until its light flashes.
2) When the light is flashing select ‘Connect’ on
TV.
If you are unsure, please check the instruction
manual of the access point.
Connect
Press the WPS button on the access point until the light flashes.
And then, press the OK button to connect the Wireless LAN Adaptor and the
access point.
Ensure that your access point supports WPS for this setup.
WPS: Wi-Fi Protected Setup
Search for access point
Access points found automatically are listed.
Available Access Points
Access Point A 11n(2.4GHz)
11n(5GHz)
SSIDNo. Wireless type Encrypt Reception
Access Point B
Access Point C 11n(5GHz)
1
2
3
Select your desired access point
select
access
: Encrypted access point
To search access points again
yellow
For the information of the
highlighted access point
To set manually
red
Encryption Key Setting
Connection will be made with the following settings:-
SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
Access the encryption key input mode
If the selected access point is not encrypted, the confirmation screen will be
displayed. It is recommended to select the encrypted access point.
Access Point Settings
Encryption key
A B C D E F G H I J K L M N
U V W X Y Z 0 1 2 3 4 5 6
a b c d e f g h i j k l m n
u v w x y z ( ) + - . * _
O P Q R S T
7 8 9 ! : #
o p q r s t
Enter the encryption key of the access point
Set characters one by one Store
select
set
BACK/
RETURN
You can set characters by using numeric buttons.
Access Point Settings
Encryption key is set to:-
XXXXXXXX
Select ‘Yes’ to confirm.
Select ‘No’ to change.
Yes No
Select “Yes”
select
confirm
To re-enter the encryption key, select “No”.
WPS(PIN)
Available Access Points
Access Point A 11n(2.4GHz)
11n(5GHz)
SSIDNo. Wireless type Encrypt Reception
Access Point B
Access Point C 11n(5GHz)
1
2
3
Select your desired access point
select
access
Ensure that your access point
supports WPS for this setup.
To search access points again
yellow
For the information of the
highlighted access point
To set manually
red
WPS(PIN)
Please register the following PIN codes on the
access point.
PIN code : 12345678
Select ‘Connect’ after entering and saving the
settings on the access point.
Connect
Enter the PIN code to the
access point, and then select
“Connect”
Manual
You can setup SSID, authentication type,
encryption type, and encryption key manually.
Follow the on screen instructions and set
manually.
When you use 11n (5GHz) for the wireless
system between the Wireless LAN Adaptor
and access point, please select “AES” for
the encryption type.
Access Point Settings
Please input the SSID.
SSID XXXXXXX
SSID Setting
SSID is set to:-
XXXXXXX
Select ‘Yes’ to confirm.
Select ‘No’ to change.
Yes No
Authentication Type Settings
WPA2-PSK
WPA-PSK
Shared key
Open
Connection will be made with the following settings:-
SSID : XXXXXXX
Please select the authentication type.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-P50V20E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-P50V20E in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-P50V20E

Panasonic TX-P50V20E User Manual - German - 100 pages

Panasonic TX-P50V20E User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info