461786
96
Zoom out
Zoom in
Previous page
1/104
Next page
FAQs | On screen messages
96
Problem Actions
Network
Cannot connect to
the network
Check the LAN cable is connected properly. (p. 69)
Check the connections and settings. (p. 69 - 74)
Check the network equipment and network environment.
The router may not be set to issue IP address automatically. If the
network administrator prefers to allocate an IP address, set an IP
address manually. (p. 71)
The router may be using MAC address filtering (security setting).
Confirm the MAC Address of this TV (p. 74) and set the router to be able
to use it.
If the problem persists, consult your Internet Service Provider or
telecommunications company.
Cannot operate
VIERA Connect
Check the connections and settings. (p. 69 - 74)
The server or connected line might be busy now.
Other
The TV does not
switch On
Press and hold the standby On / Off switch on the remote control for
about 1 second if Power LED is red.
Check the mains lead is plugged into the socket.
The fuse in the mains plug may have blown. Replace it with one of an
identical rating (p. 4)
The TV goes into
Standby mode
Auto power standby function is activated. (p. 10)
The TV enters Standby mode about 30 minutes after analogue broadcast
ends.
The remote control
does not work or is
intermittent
Are the batteries installed correctly? (p. 7)
Has the TV been switched On?
The batteries may be running low. Replace them.
Point the remote control directly at the front of the TV (within about 7 m
and a 30 degree angle of the front of the TV).
Situate the TV so that sunshine or other sources of bright light do not
shine on the TV’s remote control signal receiver.
Parts of the TV
become hot
Temperature rises of parts of the front, top and rear panels will not pose
any problems in terms of performance or quality of the TV.
Overcurrent error
message appears
The connected USB device might cause this error. Remove the device
and turn the TV Off with Mains power On / Off switch, then turn it On
again.
Check if foreign objects are inside the USB port.
An error message
appears
Follow the message’s instructions.
If the problem persists, contact your local Panasonic dealer or the
authorized Service Centre.
On screen messages
Message Meaning / Action
All tuning data will be
erased
[Shipping Condition] will erase all tuning data (p. 55)
Are you sure ?
Confirm correct operation.
Are you sure you want to
delete this timer ?
Press OK to delete timer.
Press RETURN to return.
Confirm correct operation.
Bad signal
The signal is weak. Check the aerial is plugged in properly. It may
be necessary to have an aerial installer check the signal and aerial
alignment.
Reset channels. (p. 46)
Child Lock is active!
Press OK to enter PIN.
The selected channel is locked in Child Lock (p. 53). You must enter
the PIN number before the channel will be displayed.
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-P50ST30E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-P50ST30E in the language / languages: English as an attachment in your email.

The manual is 5,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-P50ST30E

Panasonic TX-P50ST30E User Manual - German - 104 pages

Panasonic TX-P50ST30E Quick start guide - Dutch - 28 pages

Panasonic TX-P50ST30E User Manual - Dutch - 104 pages

Panasonic TX-P50ST30E User Manual - Polish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info