452017
117
Zoom out
Zoom in
Previous page
1/124
Next page
On screen messages
117
Message Meaning / Action
External (USB-HDD) Recording
Due to Start
This message will appear 2 minutes before timer programming event for external
(USB HDD) recording due to start.
Faulty dish
The satellite cable might be short-circuited or there might be connection
problems of the cable. Check the cable and connection and then turn the TV Off
with the Mains power On / Off switch, and turn it On again.
If the message still persists, it may be necessary to consult a dish installer for
checking the dish and cable.
Feature not available.
It is not possible to record from COMPONENT or HDMI. Connect the recorder to the
TV using a fully wired SCART cable for recording from the TV tuner.
Confirm Q-Link or VIERA Link settings (p.95 - 98)
Feature not available.
Press OK to view how it works.
The selected feature on VIERA TOOLS is not available. Press the OK button to view
the demonstration to explain how to use it.
Found new software version
∗∗∗
.
Press
OK to start update (may
take over 40mins) or press EXIT
to ignore and you can update
when TV is in standby
There is a new software available.
Invalid operation - Please check
settings and connections.
Check the Q-Link or VIERA Link connection and setting (p.95 - 98)
Invalid system time. Please exit !
Cannot get the time information and cannot edit TimerProgramming screen.
Check the connection of the RF cable.
Invalid system time, Timer
Programming will not work.
Please press TV button on
remote control and check time
display on Banner
Cannot get the time information. If there is no time displayed on the Information
banner, check the connection of the RF cable.
Max. number of timers already
set !
The maximum number of timer programming events is 15.
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
There may be new channels available.
This message will appear each time a change is made by the broadcasters. This
message can be deactivated by setting [New Channel Message] to Off in [DVB
Tuning Menu].
Selecting OK will perform [Update Channel List].
No channel found.
Please check aerial or local signal
availability.
Press OK to start Auto Setup.
Follow the on screen instructions.
Please also refer to p.114.
If channels are still not found, consult your local Panasonic dealer.
No module inserted
Check the CI module is inserted completely (p. 64).
No recording -
Already recording
The equipment may already be recording.
No recording -
Check media
The tape or disc may be “write protected”, full, missing or damaged.
No recording - Playing
The equipment may be playing the tape or disc.
No recording - Unknown reason
The recording may not be performed. Check the equipment.
No service
The broadcaster has stopped the service. Check the channel in the TV Guide. (p. 22)
No signal
The TV cannot detect the signal. Check the connection of the RF cable.
Overcurrent error on USB device
occurred.
Please remove the USB device,
and switch off the TV by mains
power switch.
The connected USB device might cause overcurrent error. Follow the on screen
instructions.
Check if foreign objects are inside the USB port.
PIN incorrect!
The PIN number you entered is wrong.
Please check settings and
connections on HDMI devices.
Communication error in VIERA Link function (p. 98).
Please enter a frequency
between 10700 and 12750 MHz.
The frequency you entered is out of range. Consult the received satellite
broadcasting company. (p. 56)
Please check settings and
connections on HDMI devices.
Communication error in VIERA Link function (p.98).
Please wait.
A function is in progress.
Recording this channel now
The recorder is recording the programme from its own tuner. You can turn the TV
off and leave the equipment recording in the normal way.
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-P50GT30E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-P50GT30E in the language / languages: English as an attachment in your email.

The manual is 7,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-P50GT30E

Panasonic TX-P50GT30E User Manual - German - 120 pages

Panasonic TX-P50GT30E User Manual - Dutch - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info