99521
84
Zoom out
Zoom in
Previous page
1/92
Next page
84
Problem Actions
HDMI
Sound is unusual
Set the sound setting of the connected equipment to
“2ch L.PCM”.
Check the “HDMI1 Input” setting in the Sound Menu. (p. 31)
If digital sound connection has a problem, select analogue sound
connection. (p. 80)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
Check the HDMI cable is connected properly. (p. 74)
Turn the connected equipment on and then switch the TV on.
(p. 69)
Check an input signal from the equipment. (p. 81)
Use an equipment compliant with EIA/CEA-861/861B.
Network
Cannot connect to the network
Check the LAN cable is connected properly. (p. 55)
Check the connections and settings. (p. 55 - 57)
Check the network equipment and network environment.
If the problem persists, consult your Internet Service Provider or
telecommunications company.
Cannot select the file during
DLNA operations
Is media server prepared? (p. 54)
Check applicable data format. (p. 54)
Cannot operate VIERA CAST
Check the connections and settings. (p. 55 - 57)
The server or connected line might be busy now.
Other
The TV does not switch On
Press and hold the standby On / Off switch on the remote control
for about 1 second if Power LED is red.
Check the mains lead is plugged into the socket outlet.
The fuse in the mains plug may have blown. Replace it with one of
an identical rating (p. 4).
The TV goes into
“Standby mode”
Off Timer function is activated.
The TV enters “Standby mode” about 30 mins. after analogue
broadcasting ends.
The remote control does not work
or is intermittent
Are the batteries installed correctly? (p. 7)
Has the TV been switched On?
The batteries may be running low. Replace them.
Point the remote control directly at the front of the TV (within a 30
degree angle of the front of the TV).
Situate the TV away from sunshine or other sources of bright light
not to shine on the TV’s remote control signal receiver.
There may be red spots, blue
spots, green spots and black
spots on the screen
This is a characteristic of liquid crystal panels and is not a problem.
The liquid crystal panel is built with very high precision technology
giving you fine picture details.
Occasionally, a few non-active pixels may appear on the screen as
a fixed point of red, green, blue or black.
Please note this does not affect the performance of your LCD.
The LCD panel moves slightly
when it is pushed with a finger
Clattered sound might be heard
There is some flexibility around the panel to prevent damage to the
panel.
The panel might move slightly when it is pushed with a finger, and
clattered sound might be heard. This is not a malfunction.
An error message appears
Follow the message’s instructions.
If the problem persists, contact the authorized Service Centre.
FAQs
84


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-tx-l32v10e

Reset search

  • tx-l32v10e start niet meteen op , duurt ongeveer 5 minuten ,hoe op te lossen Submitted on 19-7-2022 at 10:57

    Reply Report abuse
  • tv start niet meteen op, groen lampje knippert ongeveer 6 minuten en dan sneeuw , door hdmi kpn in te drukken krijg ik prima beeld van de kpn tv ontvanger. Submitted on 19-7-2022 at 10:54

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-L32V10E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-L32V10E in the language / languages: English as an attachment in your email.

The manual is 5,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-L32V10E

Panasonic TX-L32V10E User Manual - German - 84 pages

Panasonic TX-L32V10E User Manual - Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info