563058
65
Zoom out
Zoom in
Previous page
1/68
Next page
Frequently Asked Questions Ɣ
Technical Information Ɣ
FAQs, etc.
65
FAQs
Block noise, frozen or
disappearing image occurs
in DVB mode / White spots
or shadow image (ghosting)
occurs in Analogue mode /
Some channels cannot be
tuned
Check the position, direction and connection of Ɣ
the aerial.
Check “Signal Condition” (p. 34). If “Signal Ɣ
Quality” is displayed in red, the DVB signal is
weak.
Weather conditions will affect signal reception
Ɣ
(heavy rain, snow, etc.), in particular in poor
reception areas. Even during good weather,
the high pressure can cause poor reception of
some channels.
Due to the digital reception technologies Ɣ
involved, quality of the digital signals may be
relatively low in some cases, despite good
reception of analogue channels.
Turn the TV off with the Mains power On / Off
Ɣ
switch, and then on again.
If problem persists, consult your local dealer or Ɣ
service provider for the availability of services.
Neither image nor sound is
produced
Is the TV in AV mode?Ɣ
Check the correct AV input mode is selected.Ɣ
Check the mains lead is plugged into the Ɣ
socket outlet.
Has the TV been turned On?
Ɣ
Check the Picture Menu (p. 26) and volume.Ɣ
Check all required cables and connections are Ɣ
firmly in place.
Auto aspect
Auto aspect is designed to provide you with the Ɣ
best ratio to fill the screen. (p. 60)
Press the ASPECT button if you would like to Ɣ
change the aspect ratio manually (p. 16).
S-Video / black and white
picture
Check that the output of the external Ɣ
equipment matches the input of the TV. If
the output of the external equipment is set to
S-Video, the TV must also be set to S-Video
(p. 22).
No programmes shown on TV
Guide
Check the digital transmitter.Ɣ
Adjust the direction of the aerial to another transmitter Ɣ
installed nearby.
Check the analogue broadcast.
Ɣ
If the image quality is poor, check the aerial and consult
your local dealer.
Input mode, i.e. EC/AV1 remains
on the screen
Press the Ɣ button to clear these.
Press again to redisplay.
Q-Link function does not work
Confirm SCART cable and connection. Ɣ
Also set “AV1 out” in the Setup Menu (p. 28).
“VIERA Link” function does
not work and an error message
appears
Confirm the connection. (p. 50 and p. 51)Ɣ
Turn the connected equipment on and then switch the Ɣ
TV on. (p. 53)
Recording does not start
immediately
Check the settings of the recorder. For details, read the Ɣ
manual of the recorder.
There may be red spots, blue
spots, green spots and black
spots on the screen
This is a characteristic of liquid crystal panels and is Ɣ
not a problem. The liquid crystal panel is built with very
high precision technology giving you fine picture details.
Occasionally, a few non-active pixels may appear on
the screen as a fixed point of red, green, blue or black.
Please note this does not affect the performance of
your LCD.
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer for assistance.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-L32C20ES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-L32C20ES in the language / languages: English as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-L32C20ES

Panasonic TX-L32C20ES User Manual - German - 68 pages

Panasonic TX-L32C20ES User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info