511711
102
Zoom out
Zoom in
Previous page
1/108
Next page
FAQs | On screen messages
102
Problem Actions
Other
The remote control
does not work or is
intermittent
Are the batteries installed correctly? (p.7)
Has the TV been switched On?
The batteries may be running low. Replace them.
Point the remote control directly at the front of the TV (within about 7 m and a 30
degree angle of the front of the TV).
Situate the TV so that sunshine or other sources of bright light do not shine on the TVs
remote control signal receiver.
Parts of the TV become
hot
Temperature rises of parts of the front, top and rear panels will not pose any problems in
terms of performance or quality of the TV.
The LCD panel moves
slightly when it is
pushed with a finger
Clattered sound might
be heard
There is some flexibility around the panel to prevent damage to the panel.
The panel might move slightly when it is pushed with a finger, and clattered sound
might be heard. This is not a malfunction.
Overcurrent error
message appears
The connected USB device might cause this error. Remove the device and turn the TV
Off with Mains power On / Off switch, then turn it On again.
Check if foreign objects are inside the USB port.
An error message
appears
Follow the message’s instructions.
If the problem persists, contact your local Panasonic dealer or the authorized Service Centre.
On screen messages
Message Meaning / Action
All contents will be lost.
Are you sure to delete this device?
Once you format the USB HDD, all the recorded programme will be erased.
All tuning data will be erased
[Shipping Condition] will erase all tuning data (p.49)
Are you sure ?
Confirm correct operation.
Are you sure you want to delete
this timer?
Press OK to delete timer.
Press RETURN to return.
Confirm correct operation.
Bad signal
The signal is weak. Check the aerial is plugged in properly. It may be necessary to
have an aerial installer check the signal and aerial alignment.
Reset channels. (p.40)
Child Lock is active!
Press OK to enter PIN.
The selected channel is locked in Child Lock (p.47). You must enter the PIN number
before the channel will be displayed.
External (USB-HDD) Recording
Due to Start
This message will appear 2 minutes before timer programming event for external
(USB HDD) recording due to start.
Feature not available.
It is not possible to record from COMPONENT or HDMI. Connect the recorder to the
TV using a fully wired SCART cable for recording from the TV tuner.
Confirm Q-Link or VIERA Link settings (p.81 - 84)
Feature not available.
Press OK to view how it works.
The selected feature on VIERA TOOLS is not available. Press the OK button to view
the demonstration to explain how to use it.
Found new software version
∗∗∗
.
Press
OK to start update (may
take over 40mins) or press EXIT
to ignore and you can update
when TV is in standby
There is a new software available.
Invalid operation - Please check
settings and connections.
Check the Q-Link or VIERA Link connection and setting (p.81 - 84)
Invalid system time. Please exit !
Cannot get the time information and cannot edit TimerProgramming screen.
Check the connection of the RF cable.
Invalid system time, Timer
Programming will not work.
Please press TV button on
remote control and check time
display on Banner
Cannot get the time information. If there is no time displayed on the Information
banner, check the connection of the RF cable.
Max. number of timers already
set !
The maximum number of timer programming events is 15.
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-L24XW6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-L24XW6 in the language / languages: English as an attachment in your email.

The manual is 6,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-L24XW6

Panasonic TX-L24XW6 User Manual - German - 96 pages

Panasonic TX-L24XW6 User Manual - Dutch - 170 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info