772005
24
Zoom out
Zoom in
Previous page
1/84
Next page
English
24
FAQs
Before requesting service or assistance, please follow
these simple guides to solve the problem.
 For details, refer to [eHELP] (Support > FAQs).
The TV does not switch on
 Check the mains lead is plugged into the TV and the
mains socket.
The TV goes into Standby mode
 Auto power standby function is activated.
The remote control does not work or is intermittent
 Are the batteries installed correctly? (p. 19)
 Has the TV been switched on?
 The batteries may be running low. Replace them with
new ones.
 Point the remote control directly at the TV’s remote
control signal receiver (within about 7 m and a
30 degree angle of the signal receiver).*
 Situate the TV away from sunshine or other sources
of bright light so they do not shine on the TV’s remote
control signal receiver.*
 Is the remote control mode wrong? (p. 19)
 If you are trying to use voice controls, is the remote
control registered (paired) with the TV? (p. 16)
When infrared communication is used
No image is displayed
 Check the TV is turned on.
 Check the mains lead is plugged into the TV and the
mains socket.
 Check the correct input mode is selected.
 Is [Backlight], [Contrast], [Brightness] or [Colour] in
the Picture menu set to the minimum?
 Check all required cables and connections are firmly
in place.
An unusual image is displayed
 This TV has a built-in Self Test. Makes a diagnosis of
picture or sound problems.
[TV Self Test] ([Help] menu)
 Turn the TV off with Mains power On / Off switch,
then turn it on again.
 If the problem persists, initialise all settings.
[Shipping Condition] in [System Menu] ([Setup]
menu)
The image or sound from external equipment are
unusual when the equipment is connected via HDMI
 Set [HDMI Auto Setting] ([Setup] menu) to [Mode1].
(p. 15)
No sound is produced from the connected HDMI
equipment
 Set the audio output format of the connected HDMI
equipment to PCM.
Voice control function does not work
 If the remote control is not registered (paired) with the
TV, register (pair) the remote control. (p. 16)
 Check the network connections and settings.
Parts of the TV become hot
 Parts of the TV may become hot. These temperature
rises do not pose any problems in terms of
performance or quality.
When pushed with a finger, the display panel moves
slightly and makes a noise
 There is a little gap around the panel to prevent
damage to the panel. This is not a malfunction.
About the inquiry
 Please contact your local Panasonic dealer for
assistance.
If you make an inquiry from a place where this TV
is not present, we cannot answer about contents
that require visual confirmation for connection,
phenomenon, etc. of this TV itself.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-50JXX889 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-50JXX889 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-50JXX889

Panasonic TX-50JXX889 Quick start guide - German - 84 pages

Panasonic TX-50JXX889 User Manual - German - 388 pages

Panasonic TX-50JXX889 User Manual - Dutch - 375 pages

Panasonic TX-50JXX889 Quick start guide - French, Italian - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info