656594
311
Zoom out
Zoom in
Previous page
1/331
Next page
e
HELP
English
TX-40DXF687 TX-49DXF687 TX-55DXF687
TX-40DXN688 TX-49DXN688 TX-55DXN688
TX-40DXT686 TX-49DXT686 TX-55DXT686
TX-40DXX689 TX-49DXX689 TX-55DXX689
- 2 -
Read first
eHELP
•How to use 12
Features
•4K resolution 13
•Home Screen 14
•Info Frame 15
•TV Anywhere 16
•DVB-via-IP 17
•Easy Mirroring 18
Home Screen
Home Screen
•Information 19
•How to use 21
•Pin to HOME 22
•Option menu 23
Live TV
•How to use 24
•Option menu 25
Apps
•How to use 26
•Option menu 27
Devices
•How to use 28
•Option menu 29
Watching
Basic
•Basic connection 30
•Selecting channel 33
•Information banner 35
•AV Options 38
- 3 -
•Subtitle 40
•Last view 41
•Off Timer 42
•Energy saving functions 43
•Adjusting time 46
•Language 47
4K resolution
•4K compatible equipment 48
•HDMI Auto Setting 49
•Valid 4K format 50
External equipment
•External connection 51
•Watching external input 55
•Operating with TV’s remote control 57
•HDMI features 59
•Valid input signals 61
For best picture
•Viewing Mode 62
•Ambient Sensor 63
•Aspect 64
•Aspect Control Signal 65
•Basic settings 67
•Noise reduction settings 69
•Advanced Settings 70
•Option Settings 74
•Screen Settings 77
•Copy Adjustment 79
For best audio
•Sound mode 80
•Basic settings 81
•Volume settings 83
•Voice Guidance Settings 85
•Audio Description 87
- 4 -
•Advanced settings 88
TV Guide
•Using TV Guide 91
•Timer Programming 94
Teletext
•Viewing Teletext 96
•Teletext mode 98
•Teletext Character Set 99
Tuning and editing channels
•Setting menu 100
•Favourites Edit 101
•Channel List 103
•Auto Setup 106
•Manual Tuning 110
•Update Channel List 113
•Signal Condition 114
•Other settings 115
•Selectable satellites 116
Recording
USB HDD setup
•Preparations 117
•Setting for USB HDD 119
Recording current programme
•One Touch Recording 121
•REW LIVE TV 122
Timer Programming
•Setting Timer Programming 124
•Editing Timer Programming 126
•Remote recording 127
•Note 128
Technical information
•USB HDD 129
- 5 -
Media Player
Using Media Player
•Information 130
•Selecting device / mode 132
•Network device 134
•Sharing file 135
Photo mode
•Selecting file 136
•Viewing photo 137
•Sorting photos 138
•Using Slideshow 139
Video mode
•Selecting file 141
•Watching video 142
•Video Setup 144
•Audio output settings 146
Music mode
•Selecting file 147
•Playing music 148
•Music Setup 149
Recorded TV mode
•Selecting content 150
•Watching recorded TV 151
•Grouping content 153
•Deleting content 154
•Chapter List 155
•Audio output settings 156
Technical information
•Device handling caution 157
•USB devices 158
•Photo format 159
•Video format 160
•Music format 163
- 6 -
Network
Internet content
•Information 164
•Selecting internet content 165
•Note 166
DLNA
•In-House streaming 167
•Using DLNA 170
Network connections
•Internet connection 171
•DLNA connection 172
•Note 174
Network settings
•Network Connection 175
•Custom - Wireless 177
•Custom - Wired 180
•Custom - Wireless Access Point 182
•Network Status 183
•my Home Cloud Settings 184
•VIERA Name 185
•TV Remote App Settings 186
•Network Link Settings 188
•TV Anywhere Settings 190
•File Sharing Settings 191
•Mirroring Settings 192
•Do Not Track Setting 193
•Software Update 194
•New Software Message 195
Photos
•Selecting file 196
•Viewing photo 197
•Using Slideshow 198
- 7 -
Videos
•Selecting file 199
•Watching video 200
•Video Setup 202
•Audio output settings 204
Music
•Selecting file 205
•Playing music 206
•Music Setup 207
DIGA Recorder
•Controlling DIGA Recorder 208
Technical information
•Photo format 209
•Video format 210
•Music format 213
Functions
Info Frame
•Information 214
•How to use 215
•Settings 216
Voice Control
•Information 217
•How to use 218
•Settings 219
•Note 220
TV Anywhere
•How to use 221
•TV Anywhere Settings 222
Mirroring
•How to use 223
•Mirroring Settings 224
- 8 -
DVB-via-IP
•DVB-via-IP client connection 225
•DVB-via-IP Server Selection 227
•Note 229
Multi Window
•Picture in Picture 230
•Note 231
VIERA Link “HDAVI Control™”
•Summary of VIERA Link 232
•Preparations 237
•Easy playback 238
•Power on Link 239
•Power off Link 240
•Standby Power Save 241
•Intelligent Auto Standby 242
•VIERA Link Control 243
•Speaker Selection 245
•Note 246
Child Lock
•Using Child Lock 247
•PIN number 248
•Parental Rating 249
Data Service Application
•Using Data Service Application 250
•Cookie 251
•Note 252
Common Interface
•Caution 253
•Using Common Interface 254
Shipping Condition
•Shipping Condition 255
Updating the TV Software
•Information 256
- 9 -
•Auto update 257
•Manual update 258
Setting characters
•Using Numeric buttons 259
Keyboard
•Keyboard 260
Settings
Setting menu
•How to use 261
Picture
•Viewing Mode 263
•Basic settings 264
•Ambient Sensor 265
•Noise reduction settings 266
•Advanced Settings 267
•Option Settings 268
•Screen Settings 270
•Copy Adjustment 271
•Reset to Defaults 272
Sound
•Mode 273
•Basic settings 274
•Volume settings 275
•Voice Guidance Settings 276
•Audio Description 277
•Advanced settings 278
•Reset to Defaults 280
Network
•Network Connection 281
•Network Status 282
•my Home Cloud Settings 283
•VIERA Name 284
- 10 -
•TV Remote App Settings 285
•Network Link Settings 286
•TV Anywhere Settings 287
•File Sharing Settings 288
•Mirroring Settings 289
•Do Not Track Setting 290
•Other settings 291
Timer
•Off Timer 292
•Timer Programming 293
•Time Zone 294
•Auto Standby 295
•No signal Power off 296
Setup
•Eco Navigation 297
•Voice Control Settings 298
•USB Device Setup 299
•Recording Setup 300
•Child Lock 301
•Tuning Menu 302
•Language 305
•Display Settings 306
•HDMI Auto Setting 308
•Common Interface 309
•VIERA Link Settings 310
•Data Service Application 311
•System Menu 312
•Other Settings 313
Support
Help menu
•Using Help menu 314
- 11 -
FAQs
•Picture 315
•Digital TV 317
•Analogue TV 319
•Sound 320
•HDMI 321
•Network 322
•Other 324
•Detailed information 326
Maintenance
•Care and Cleaning 327
Licence
•Licence 328
Read first
eHELP
How to use
Meaning of signs
OK :
Letters enclosed in brackets indicate remote control buttons.
Menu :
Letters in cyan indicate on-screen display items.
:
References in this eHELP
When the icon (
- ) is displayed, you can jump to the page for
detailed descriptions pressing Numeric buttons.
(red) :
Displays the menu related to the description (only for some descriptions)
= Note =
Design and specifications are subject to change without notice.
The images shown in this eHELP are for illustrative purposes only.
- 12 -
Features
4K resolution
You can watch content in 4K format that has twice the horizontal and vertical
resolution of the 1080p signal.
Watching > 4K resolution > 4K compatible equipment
- 13 -
Home Screen
“Home Screen” is a gateway to the TV programmes, applications and
connected devices.
It provides you an easy way to access all the features.
Home Screen > Home Screen > Information
- 14 -
Info Frame
Info Frame is a convenient feature to provide you relevant information of the
programme being watched, recommendations, etc. It is displayed on the edge
of screen when you need it.
Functions > Info Frame > Information
- 15 -
TV Anywhere
You can watch TV and set timer event with the network equipment
(smartphone, etc.) from outside the home network.
Due to network conditions or certain broadcaster restrictions, this function
may not be available.
Functions > TV Anywhere > How to use
- 16 -
DVB-via-IP
This TV has DVB-via-IP client function and can connect to DVB-via-IP server
or SAT>IP compatible servers to receive broadcast streaming.
Functions > DVB-via-IP > DVB-via-IP client connection
- 17 -
Easy Mirroring
You can watch and display images of other devices (smartphone, etc.) on the
TV screen using a mirroring function. You can also start the mirroring function
from the other devices without operating the TV.
Functions > Mirroring > How to use
- 18 -
Home Screen
Home Screen
Information
“Home Screen” is a gateway to the TV programmes, applications and
connected devices.
Home Screen is displayed by pressing HOME and it provides you an easy
way to access all the features as shown below (example).
Home Screen
Live TV
Gateway to TV programmes
Home Screen > Live TV
Apps
Gateway to various applications (internet content, etc.)
Home Screen > Apps
Devices
Gateway to connected devices (HDMI equipment, USB device, network
device, etc.)
Home Screen > Devices
- 19 -
= Note =
Be sure to update the software when a software update notice is displayed
on the TV screen. If the software is not updated, you may not be able to
use Home Screen. You can update the software later manually.
Network > Network settings > Software Update
- 20 -
How to use
From Home Screen, you can access all the features such as TV programmes,
applications and connected devices.
1. Display Home Screen with HOME.
(Example)
2. Select Live TV / Apps / Devices and press OK to access.
To watch full-screen TV, select Live TV.
(Example)
Also refer to on the top right of Home Screen for the operations.
Search
You can search the content from various features.
1. Display Home Screen with HOME.
2. Select
on the top left of Home Screen and press OK to access.
3. Follow the on-screen instructions.
- 21 -
Pin to HOME
You can add a shortcut for a frequently used feature on Home Screen.
1. Display Home Screen with HOME.
2. Select Live TV / Apps / Devices and press OK to access.
3. Select a feature (TV programme / application / device).
4. Display the option menu with OPTION.
5. Select Pin to HOME and press OK to set.
To remove a shortcut from Home Screen, set Unpin from HOME.
Home Screen > Home Screen > Option menu
- 22 -
Option menu
You can customise Home Screen.
1. Display the option menu with OPTION.
2. Select one of the following items and press OK to access.
Unpin from HOME / Move
3. Set the item and press OK to store.
Unpin from HOME
Remove a shortcut from Home Screen.
Move
Arranges the position of the icons.
- 23 -
Live TV
How to use
Live TV is a gateway to the TV programmes.
1. Display Home Screen with HOME.
2. Select Live TV.
(Example)
3. Press OK to access.
(Example)
For details of watching TV
Watching > Basic
To add a shortcut icon
Home Screen > Home Screen > Pin to HOME
- 24 -
Option menu
1. Display the option menu with OPTION.
2. Select one of the following items and press OK to access.
Pin to HOME / Unpin from HOME / Accessibility / AV Options
3. Set the item and press OK to store.
Pin to HOME, Unpin from HOME
Adds / removes a shortcut for a frequently used feature on Home Screen.
Home Screen > Home Screen > Pin to HOME
Accessibility
Guidance settings for visually impaired users
Watching > For best audio > Voice Guidance Settings
AV Options
Easy optional setting for viewing, sound, etc.
Watching > Basic > AV Options
Menu items and selectable options vary depending on the TV mode.
- 25 -
Apps
How to use
Various applications (internet content, etc.) can be accessed easily from
Apps.
1. Display Home Screen with HOME.
2. Select Apps and press OK to access.
(Example)
To exit Apps
EXIT
To add a shortcut icon
Home Screen > Home Screen > Pin to HOME
3. Select an application and press OK to access.
4. Follow the on-screen instructions.
= Note =
A broadband network environment is required to fully use this function.
Design and specifications are subject to change without notice.
- 26 -
Option menu
1. Display the option menu with OPTION.
2. Select one of the following items and press OK to access.
Pin to HOME / Unpin from HOME / Move / Lock / Unlock / Uninstall / Show
Info.
3. Set the item and press OK to store.
Pin to HOME, Unpin from HOME
Adds / removes a shortcut for a frequently used feature on Home Screen.
Home Screen > Home Screen > Pin to HOME
Move
Arranges the position of the applications.
Lock, Unlock
Locks / unlocks a specific application to restrict access (if available).
Child Lock PIN number is required to access to locked application.
Functions > Child Lock > PIN number
Uninstall
Deletes an application from Apps (if available).
Show Info.
Displays the information about the selected application.
- 27 -
Devices
How to use
Connected devices (HDMI equipment, USB device, network device, etc.) can
be accessed easily from Devices.
1. Display Home Screen with HOME.
2. Select Devices and press OK to access.
(Example)
To exit Devices
EXIT
To add a shortcut icon
Home Screen > Home Screen > Pin to HOME
3. Select a device and press OK to access.
For external equipment
Watching > External equipment
For USB device, network device for Media Player
Media Player
For network equipment for DLNA
Network > DLNA
For mirroring function
Functions > Mirroring
= Note =
Design and specifications are subject to change without notice.
- 28 -
Option menu
1. Display the option menu with OPTION.
2. Select one of the following items and press OK to access.
Pin to HOME / Unpin from HOME / Accessibility / Show Info.
3. Set the item and press OK to store.
Pin to HOME, Unpin from HOME
Adds / removes a shortcut for a frequently used feature on Home Screen.
Home Screen > Home Screen > Pin to HOME
Accessibility
Guidance settings for visually impaired users
Watching > For best audio > Voice Guidance Settings
Show Info.
Displays the information about the selected device.
- 29 -
Watching
Basic
Basic connection
Please ensure that the unit is disconnected from the mains socket before
attaching or disconnecting any cables.
External equipment and cables shown are not supplied with this TV.
Satellite dish
Satellite terminal
Satellite cable
Satellite dish
For DVB-S
To ensure your satellite dish is correctly installed, please consult your local
dealer. Also consult the received satellite broadcasting companies for
details.
Selectable satellites and dish alignment to tune DVB-S channels
Watching > Tuning and editing channels > Selectable satellites
Aerial
Terrestrial / cable terminal
RF cable
Terrestrial aerial / Cable
For DVB-C, DVB-T, Analogue
- 30 -
DVD Recorder / VCR
Terrestrial / cable terminal
RF cable
DVD Recorder / VCR
Terrestrial aerial / Cable
HDMI terminal
HDMI cable
Set top box
HDMI terminal
HDMI cable
Set top box
Cable
= Note =
For details of DVB-via-IP connections
Functions > DVB-via-IP
For details of VIERA Link connections
Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link
Please also read the manual of the equipment being connected.
Keep the TV away from electronic equipment (video equipment, etc.) or
equipment with an infrared sensor, otherwise distortion of image / sound
may occur or operation of other equipment may be affected.
- 31 -
Use a fully wired HDMI compliant cable.
Check the terminal type and cable plugs are correct for connection.
- 32 -
Selecting channel
1. Select the mode with TV.
DVB-S / DVB-C / DVB-T / DVB-via-IP / Analogue
Selectable modes vary depending on the channels stored.
2. Select a channel with Channel Up / Down or Numeric buttons.
Press Numeric buttons to select a channel position with 2 or more-digit
(e.g. 399, press
).
To select a channel from the channel list
1. Display the channel list with OK.
2. Select a channel from the list and press OK to watch.
To sort channel names in alphabetical order
(red)
To change the category
(blue)
To select a channel using information banner
1. Display information banner with if it is not displayed.
2. Select a channel and press OK to watch while the banner is displayed.
Watching > Basic > Information banner
To select a channel using TV Guide
1. Display TV Guide with GUIDE.
2. Select the current programme and press OK to access.
The current programme is displayed on the top left of the screen.
3. Select View and press OK to watch.
Watching > TV Guide > Using TV Guide
Not valid in Analogue
- 33 -
To watch pay-TV
For details of the encrypted channels
Functions > Common Interface > Using Common Interface
Consult the operator / broadcaster or CI module manufacturer for more
information and conditions of the services.
- 34 -
Information banner
Display information banner with .
Also appears when changing a channel.
(Example)
Channel position and name
Channel type (Radio, HDTV, etc.) / Encrypted channel ( ) / TV mode ( ,
, , , )
Programme
Start time / End time (except Analogue)
Channel position, etc. (Analogue)
Progress time indicator of the selected programme (except Analogue)
Category
To change the category (DVB)
1) Display the category list with
(blue).
2) Select the category and press OK to change.
Current time
Features available / message meanings
Bad signal:
Poor quality TV signal
Dolby D+, Dolby D, HE-AAC:
Dolby Digital Plus, Dolby Digital or HE-AAC audio track
AD:
Audio Description service available
This function can aid visually-impaired viewers by providing an
additional audio track to describe events on screen.
Watching > For best audio > Audio Description
:
Subtitle service available
- 35 -
:
Teletext service available
:
Multiple audio available
:
Multiple video available
:
Multiple audio and video available
Stereo, Mono:
Audio mode
:
Data service (Hybrid Broadcast Broadband TV application) available
Functions > Data Service Application > Using Data Service Application
190:
Off Timer remaining time
Watching > Basic > Off Timer
To confirm another tuned channel
/
To watch the channel listed in the banner
OK
Information on the next programme (DVB)
Extra information (DVB)
Press again to hide the banner.
To hide the banner
EXIT
To adjust banner timeout, set Banner Display Timeout.
1) Display the menu with MENU.
2) Select Setup > Display Settings > Banner Display Timeout and press
OK to access.
3) Set the item and press OK to store.
- 36 -
To display the introduction banner for the internet service
1) Display the menu with MENU.
2) Select Setup > Display Settings > Smart Banner and press OK to
access.
3) Select On / Off and press OK to set.
- 37 -
AV Options
Confirm or change the current status.
Display the full-screen TV to use this function.
1. Display the option menu with OPTION.
2. Select AV Options and press OK to access.
3. Select one of the following items and press OK to access.
Audio Type / Multi Video / Multi Audio / Dual Audio / Sub Channel / Subtitle
Language / Teletext Character Set / Teletext Language / MPX / Volume
Correction
The function items vary depending on the TV mode and country you
select.
4. Set the item and press OK to store.
Audio Type
Set to Audio Description if the programme has Audio Description service,
then you will hear an additional audio track to describe events on screen (if
available).
For DVB
To adjust the volume for Audio Description
Watching > For best audio > Audio Description
Multi Video
Selects from a group of multiple videos (if available).
This setting is not memorised and it returns to the default setting once you
exit the current programme.
For DVB
Multi Audio
Selects between alternative language or Audio Description for sound tracks (if
available).
This setting is not memorised and it returns to the default setting once you
exit the current programme.
For DVB
Dual Audio
Selects stereo / monaural (if available).
For DVB
- 38 -
Sub Channel
Selects the multifeed programme - sub channel (if available).
For DVB
Subtitle Language
Selects between alternative subtitle languages or types (if available).
This setting is not memorised and it returns to the default setting once you
exit the current programme.
For DVB
Teletext Character Set
Sets the teletext language font.
Watching > Teletext > Teletext Character Set
Teletext Language
Selects between alternative teletext languages (if available).
This setting is not memorised and it returns to the default setting once you
exit the current programme.
For DVB
MPX
Selects multiplex sound mode (if available).
Watching > For best audio > Advanced settings
For Analogue
Volume Correction
Adjusts the volume of each individual channel or input mode.
- 39 -
Subtitle
Display / hide subtitles (if available) with STTL.
To select the preferred language for DVB subtitles (if available), set
Preferred Subtitles.
Watching > Basic > Language
To select the preferred subtitle type
1) Display the menu with MENU.
2) Select Setup > Display Settings > Preferred Subtitle Type and press
OK to access.
3) Select Standard / Hard of Hearing and press OK to set.
Hard of Hearing provides aids in understanding and enjoyment with
DVB subtitles (depending on the broadcaster).
Preferred Subtitles 1 / 2 in Language are given priority.
Watching > Basic > Language
= Note =
If you press STTL in Analogue, the TV switches to teletext service and
calls up a favourite page. Press EXIT to return to TV mode.
- 40 -
Last view
Switch to a previously viewed channel or input mode easily with LAST VIEW.
Press again to return to the current view.
= Note =
Switching channel may not be available depending on the condition.
Watching less than 10 seconds is not reflected in the previously viewed
channel or input mode.
- 41 -
Off Timer
Switch to TV Standby mode automatically after a fixed period.
1. Display the menu with MENU.
2. Select Timer > Off Timer and press OK to access.
3. Select the time in 15-minute increments and press OK to set.
90 / 75 / 60 / 45 / 30 / 15 / Off (minutes)
To cancel, set to Off or turn the TV off.
The remaining time is displayed on the bottom right of the screen.
The remaining time will flash on the screen when less than 3 minutes.
- 42 -
Energy saving functions
The TV can be eco-friendly using energy-saving functions.
The TV goes into Standby mode in the following conditions:
Eco Navigation is set to Set to Eco.
Off Timer is active.
Watching > Basic > Off Timer
No operation is performed for 4 hours while Auto Standby is set to On.
No signal is received and no operation is performed for 10 minutes while
No signal Power off is set to On.
= Note =
This function does not affect the recording.
Auto Standby
1. Display the menu with MENU.
2. Select Timer > Auto Standby and press OK to access.
3. Select On / Off and press OK to set.
Auto Standby
(On / Off)
Automatically turns the TV to Standby mode for energy saving when no
operation is performed for 4 hours.
Automatic input switching with the connected equipment affects this
function and time-count resets.
A notification message will appear 3 minutes before going into Standby
mode.
Changing the default configuration may result in higher energy
consumption of the product.
- 43 -
No signal Power off
1. Display the menu with MENU.
2. Select Timer > No signal Power off and press OK to access.
3. Select On / Off and press OK to set.
No signal Power off
(On / Off)
Automatically turns the TV to Standby mode to prevent unnecessary power
consumption when no signal is received and no operation is performed for 10
minutes.
A notification message will appear 3 minutes before going into Standby
mode.
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode.
The concerned items and their current settings are displayed. Select Set to
Eco to set them to the energy-saving settings at once.
1. Display the menu with MENU.
2. Select Setup > Eco Navigation and press OK to access.
3. Select Set to Eco and press OK to set.
Auto Standby and No signal Power off are active when Eco Navigation is
set to Set to Eco.
- 44 -
Radio Mode
Sets the timer for turning off the screen automatically when a radio channel is
selected.
1. Display the menu with MENU.
2. Select Setup > Display Settings > Radio Mode and press OK to access.
3. Select the time and press OK to set.
20 / 15 / 10 / 5 / Off (seconds)
Sound is active even if the screen is turned off. This function is effective in
reducing power consumption when listening to a radio channel.
Press any buttons except Standby On / Off switch, Volume Up / Down and
MUTE to turn the screen on.
Not valid in Analogue
- 45 -
Adjusting time
Adjusts the time data.
1. Display the menu with MENU.
2. Select Timer > Time Zone and press OK to access.
3. Set the item and press OK to store.
The time data are corrected based on GMT.
- 46 -
Language
1. Display the menu with MENU.
2. Select Setup > Language and press OK to access.
3. Select one of the following items and press OK to access.
OSD Language / Preferred Audio 1 / 2 / Preferred Subtitles 1 / 2 /
Preferred Teletext
4. Set the item and press OK to store.
OSD Language
Changes language for on-screen displays.
Preferred Audio 1 / 2
Selects the first and second preferred language for DVB multi audio
(depending on the broadcaster).
Preferred Subtitles 1 / 2
Selects the first and second preferred language for DVB subtitles (depending
on the broadcaster).
To display subtitles
Watching > Basic > Subtitle
Preferred Teletext
Selects the preferred language for DVB teletext service (depending on the
broadcaster).
- 47 -
4K resolution
4K compatible equipment
You can watch content in 4K format that has twice the horizontal and vertical
resolution of the 1080p signal.
For details of valid 4K format
Watching > 4K resolution > Valid 4K format
Connect the 4K compatible equipment to HDMI terminal using a 4K
compatible cable and you can watch content in 4K format.
4K compatible equipment
HDMI terminal
HDMI cable
4K compatible equipment
Check the terminal type and cable plugs are correct for connection.
Use a fully wired HDMI compliant cable.
- 48 -
HDMI Auto Setting
1. Display the menu with MENU.
2. Select Setup > HDMI Auto Setting and press OK to access.
3. Set the item and press OK to store.
HDMI Auto Setting
(Mode1 / Mode2)
Reproduces the image more precisely with the expanded colour gamut when
connecting the 4K compatible equipment. Select the mode depending on the
equipment.
Mode1:
For better compatibility. Set to Mode1 when the image or sound in
HDMI input is not played properly.
Mode2:
For the 4K compatible equipment that has the function to output the
image precisely with the expanded colour gamut
The setting can be stored for each HDMI input.
For HDMI1/2
Valid format (4K)
Mode1: 4:4:4 / 4:2:2 (30p, 25p, 24p), 4:2:0 (60p, 50p)
Mode2: 4:4:4 / 4:2:2 (30p, 25p, 24p), 4:4:4 / 4:2:2 / 4:2:0 (60p, 50p)
- 49 -
Valid 4K format
Valid 4K format (HDMI)
4K UHD
3 840 × 2 160 (60p, 50p, 30p, 25p, 24p)
Aspect is fixed to 16:9.
DCI 4K
4 096 × 2 160 (60p, 50p, 30p, 25p, 24p)
Actual resolution is 3 840 × 2 160p.
Aspect is fixed to V Full.
= Note =
Connect to HDMI1 or HDMI2 for the following formats.
4K UHD
30p, 25p, 24p / 4:4:4 (10 bit, 12 bit)
60p, 50p
DCI 4K
25p, 24p / 4:4:4 (10 bit, 12 bit)
60p, 50p, 30p
The above signals are reformatted for optimal viewing on your display.
For details of aspect
Watching > For best picture > Aspect
- 50 -
External equipment
External connection
These diagrams show our recommendations for connection of your TV to
various pieces of equipment. For other connections, consult the instructions
for each piece of equipment.
For details of basic connection
Watching > Basic > Basic connection
Check the terminal type and cable plugs are correct for connection.
External equipment and cables shown are not supplied with this TV.
HDMI equipment
HDMI terminal
HDMI cable
Recorder / Player / Set top box / Camcorder / Amplifier with speaker
system
= Note =
Use a fully wired HDMI compliant cable.
For details of VIERA Link connections
Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link
Use HDMI2 to connect the TV to an amplifier which has ARC (Audio
Return Channel) function.
- 51 -
AV devices
AV (COMPONENT) terminals
Component cables
DVD Player
AV (VIDEO) terminals
Composite cables
Camcorder / Game equipment
- 52 -
USB devices
USB port
USB cable
USB HDD, etc.
= Note =
It is recommended to connect the device to the TV’s USB port directly.
You cannot use two or more of the same kind of USB devices
simultaneously except USB Flash Memory or USB HDD.
Use USB 2 port for connecting the USB HDD.
Some USB devices or USB HUB may not be used with this TV.
You cannot connect any devices by using USB card reader.
Listening with external speakers
DIGITAL AUDIO
Optical digital audio cable
Amplifier with speaker system
To enjoy multi-channel sound from external equipment (e.g. Dolby Digital
5.1ch), connect the equipment to the amplifier. For information about the
connections, read the manuals of the equipment and amplifier.
To select the sound output to adjust volume, set TV Speaker Setting.
Watching > For best audio > Volume settings
- 53 -
Headphones
Headphone jack
M3 stereo mini plug
Headphones
To adjust volume, set Headphone Volume.
Watching > For best audio > Volume settings
To select the sound output to adjust volume, set TV Speaker Setting.
Watching > For best audio > Volume settings
- 54 -
Watching external input
Connect the external equipment (VCR, DVD, etc.) and you can watch through
the input.
1. Display the input selection menu with AV.
2. Select the input mode connected to the equipment and press OK to watch.
(The selected mode is displayed on the top left of the screen.)
You can also select the input pressing AV. Press repeatedly until the
desired input is selected.
You can select COMPONENT and VIDEO in AV.
You can label or skip each input mode. Skipped inputs will not be
displayed when AV is pressed. (Input Labels)
The remote control is capable of operating the content or external
equipment.
Watching > External equipment > Operating with TV’s remote control
To return to TV mode
TV
= Note =
If the external equipment has an aspect adjustment function, set it to 16:9.
For details, read the manual of the equipment or ask your local dealer.
Input Labels
Accessing the input labels list allows you to change the input name or skip
the input if unconnected, improving identification and selection in the Input
Selection banner.
Watching > Basic > Information banner
1. Display the menu with MENU.
2. Select Setup > Display Settings > Input Labels and press OK to access.
3. Set the item and press OK to set.
To name each input mode freely, select User input and set characters
(maximum 10 characters).
To skip the input mode, select Skip.
- 55 -
Playing Time Display
Set to On to display a time period of continuous use in Game Mode on the top
right of the screen every 30 minutes.
1. Display the menu with MENU.
2. Select Setup > Display Settings > Playing Time Display and press OK to
access.
3. Select On / Off and press OK to set.
This function is available when Game Mode is set to On.
- 56 -
Operating with TV’s remote control
You can operate the content in Media Player / media server, recording
functions or the connected equipment with the following buttons of this TV’s
remote control.
:
Playback (VCR / DVD / video content)
:
Stop the operations
:
Rewind, view the picture rapidly in reverse (VCR)
Skip to the previous track, title or chapter (DVD / video content)
:
Rewind, view the picture rapidly in reverse (VCR)
Search backward (DVD / video content)
:
Fast-forward, view the picture rapidly forward (VCR)
Skip to the next track, title or chapter (DVD / video content)
:
Fast-forward, view the picture rapidly forward (VCR)
Search forward (DVD / video content)
:
Pause / Resume
Press and hold to play at slow speed (DVD)
:
One Touch Recording
Recording > Recording current programme > One Touch Recording
- 57 -
How to change the code
Each Panasonic product has its own remote control code. Change the code
according to the product for operation.
1. Press and hold Standby On / Off switch during the following operations.
2. Enter the appropriate code as follows with Numeric buttons.
Codes for each product and features
70: DVD Recorder, DVD Player, Blu-ray Disc Player
71: Player theatre, Blu-ray Disc theatre
72: VCR
73 (default):
Using in USB HDD recording, Media Player, DLNA features or VIERA
Link
3. Press
to change.
= Note =
Confirm if the remote control works correctly after changing the code.
The codes may be reset to defaults if batteries are replaced.
Some operations may not be available depending on the equipment.
- 58 -
HDMI features
HDMI (high-definition multimedia interface) is the world’s first complete digital
consumer AV interface complying with a non-compression standard.
HDMI allows you to enjoy high-definition digital images and high-quality
sound by connecting the TV to external equipment.
HDMI-compatible equipment
with an HDMI or DVI output terminal, such as a
DVD player, a set top box or game equipment, can be connected to the HDMI
terminal using a fully wired HDMI compliant cable.
Watching > External equipment > External connection
: The HDMI logo is displayed on HDMI-compliant equipment.
Applicable HDMI features
Input audio signal:
2ch LPCM, Dolby Digital, Dolby Digital Plus
Audio settings can be made on HDMI Audio Format in the Sound
Menu.
Watching > For best audio > Advanced settings
Input video signal:
Matches the output setting of the digital equipment.
Watching > External equipment > Valid input signals
VIERA Link (HDAVI Control 5)
Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link
Content Type
Deep Colour
Audio Return Channel
Audio Return Channel (ARC) is a function to send digital sound signals
via an HDMI cable.
For HDMI2
x.v.Colour™
4K
Watching > 4K resolution > Valid 4K format
- 59 -
DVI connection
If the external equipment has only a DVI output, connect to the HDMI terminal
via a DVI to HDMI adaptor cable. When using the DVI to HDMI adaptor cable,
connect the audio cable to the audio input terminal (use COMPONENT /
VIDEO audio terminals).
Enquire HDMI adaptor cable at your local digital equipment retailer shop.
= Note =
Audio settings can be made on HDMI Audio Format / HDMI Input in the
Sound Menu.
Watching > For best audio > Advanced settings
If the connected equipment has an aspect adjustment function, set the
aspect ratio to “16:9”.
These HDMI connectors are “type A”.
These HDMI connectors are compatible with HDCP (High-Bandwidth
Digital Content Protection) copyright protection.
Equipment having no digital output terminal may be connected to the input
terminal of component or video to receive analogue signals.
This TV incorporates HDMI™ technology.
- 60 -
Valid input signals
COMPONENT, HDMI
Signal name COMPONENT HDMI
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1 125 (1 080) / 60i, 50i
1 125 (1 080) / 60p, 50p, 24p
3 840 × 2 160 / 60p, 50p,
30p, 25p, 24p
4 096 × 2 160 / 60p, 50p,
30p, 25p, 24p
○:Applicableinputsignal
= Note =
Signals other than above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
For details of valid 4K format
Watching > 4K resolution > Valid 4K format
- 61 -
For best picture
Viewing Mode
1. Display the menu with MENU.
2. Select Picture > Viewing Mode and press OK to access.
3. Select the mode and press OK to set.
Viewing Mode
(Dynamic / Normal / Cinema / True Cinema / Custom)
Selects your favourite picture mode for each input.
Dynamic:
Improves contrast and sharpness for viewing in a bright room.
Normal:
Normal use for viewing in a normal lighting condition.
Cinema:
Improves the performance of contrast, black and colour reproduction
for watching movies in a darkened room.
True Cinema:
Reproduces the original image quality precisely without any revision.
Custom:
Adjusts each menu item manually to suit your favourite picture quality.
The following items can be adjusted and stored for each mode.
Backlight / Contrast / Brightness / Colour / Tint / Sharpness / Colour
Temperature / Vivid Colour / Adaptive Backlight Control / Ambient Sensor
/ Noise Reduction / MPEG Remaster / Intelligent Frame Creation / Clear
Motion
- 62 -
Ambient Sensor
1. Display the menu with MENU.
2. Select Picture > Ambient Sensor and press OK to access.
3. Select On / Off and press OK to set.
Ambient Sensor
(On / Off)
Automatic Brightness Control function
Adjusts picture settings automatically depending on ambient lighting
condition.
- 63 -
Aspect
Change the aspect ratio (image size) with ASPECT.
To change the aspect ratio manually
1. Display Aspect Selection with ASPECT.
2. Select the mode and press OK to set.
You can also change the mode pressing ASPECT.
(Press repeatedly until you reach the desired mode.)
Auto:
The best ratio is selected automatically according to the “Aspect Control
Signal”.
Watching > For best picture > Aspect Control Signal
16:9:
Directly displays the image at 16:9 without distortion (anamorphic).
4:3:
Displays the image at the standard 4:3 without distortion.
Zoom:
Displays a 16:9 letterbox or 4:3 image without distortion.
V Full:
Displays the image enlarged vertically to fit the screen without distortion.
For DCI 4K format
= Note =
Display the image (TV, external input, etc.) full-screen to use this function
completely.
Aspect mode can be memorised separately for SD (Standard definition)
and HD (High definition) signals.
Aspect cannot be changed in teletext service.
Aspect is fixed to 16:9 in the following conditions:
4K content except DCI 4K
Game Mode is set to On.
1080p Pixel by 4pixels is set to On.
1080p Pure Direct is set to On.
4K Pure Direct is set to On.
- 64 -
Aspect Control Signal
Programmes usually contain an “Aspect Control Signal”. (Widescreen signal,
Control signal through HDMI terminal)
In Auto mode, aspect mode will appear in the top left of the screen if a
Widescreen signal (WSS) or a Control signal through HDMI terminal is found.
The aspect switches to the appropriate ratio.
Watching > For best picture > Aspect
Available conditions
Satellite terminal (WSS only)
Valid input signal format:
DVB-S
Terrestrial / cable terminal (WSS only)
Valid input signal format:
DVB-C
DVB-T / DVB-T2
PAL B, G, H, I, D, K
SECAM B, G, L, L’, D, K
Invalid input signal format:
PAL 525/60 6.5 MHz
PAL 525/60 6.0 MHz
PAL 525/60 5.5 MHz
M.NTSC 6.5 MHz
M.NTSC 6.0 MHz
M.NTSC 5.5 MHz
AV (VIDEO) terminals
Valid input signal format:
PAL
SECAM
PAL 525/60
M.NTSC
NTSC
: Control signal through HDMI terminal only
- 65 -
AV (COMPONENT) terminals (WSS only)
Valid input signal format:
625 (576) / 50i, 50p
Invalid input signal format:
525 (480) / 60i, 60p
750 (720) / 60p, 50p
1 125 (1 080) / 60i, 50i
HDMI terminal
Valid input signal format:
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1 125 (1 080) / 60i, 50i
1 125 (1 080) / 60p, 50p, 24p
3 840 × 2 160 / 60p, 50p, 30p, 25p, 24p
4 096 × 2 160 / 60p, 50p, 30p, 25p, 24p
HDMI terminal does not receive WSS signal.
= Note =
If the screen size looks unusual when a widescreen-recorded programme
is played back on a VCR, adjust the tracking of the VCR. Read the manual
of the VCR.
For details of valid 4K format
Watching > 4K resolution > Valid 4K format
- 66 -
Basic settings
1. Display the menu with MENU.
2. Select Picture and press OK to access.
3. Select one of the following items and press OK to access.
Backlight / Contrast / Brightness / Colour / Tint / Sharpness / Colour
Temperature / Vivid Colour / Adaptive Backlight Control / Intelligent Frame
Creation / Clear Motion
4. Set the item and press OK to store.
Backlight, Contrast, Brightness, Colour, Tint, Sharpness
Adjusts the levels of these options according to your personal preference.
Sharpness is not available when 1080p Pixel by 4pixels is set to On.
Colour Temperature
Sets the overall colour tone of the picture (bluer - redder).
Vivid Colour
(On / Off)
Automatically adjusts colours to vivid ones.
Adaptive Backlight Control
Automatically controls the level of backlight according to the images.
Intelligent Frame Creation
(Max / Mid / Min / Off)
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth.
Depending on the content, images may be noisy. To prevent the noise,
change the setting.
Not valid in the following conditions:
Game Mode is set to On.
1080p Pixel by 4pixels is set to On.
1080p Pure Direct is set to On.
4K Pure Direct is set to On.
- 67 -
Clear Motion
(On / Off)
Makes the moving pictures more clear by controlling the level of backlight.
- 68 -
Noise reduction settings
1. Display the menu with MENU.
2. Select Picture > Noise Reduction / MPEG Remaster and press OK to
access.
3. Set the item and press OK to store.
Noise Reduction
(Auto / Max / Mid / Min / Off)
Reduces unwanted picture noise.
Not valid in the following conditions:
4K content
Game Mode is set to On.
1080p Pixel by 4pixels is set to On.
1080p Pure Direct is set to On.
4K Pure Direct is set to On.
MPEG Remaster
(Auto / Max / Mid / Min / Off)
Reduces flicker noise in contoured parts of a picture and block noise.
Not valid in the following conditions:
4K content
Game Mode is set to On.
1080p Pixel by 4pixels is set to On.
1080p Pure Direct is set to On.
4K Pure Direct is set to On.
- 69 -
Advanced Settings
You can adjust and set up the detailed picture settings when Viewing Mode
is set to Cinema, True Cinema or Custom. The settings in True Cinema or
Custom can be stored for each input.
Watching > For best picture > Viewing Mode
1. Select the input mode with AV or TV.
2. Display the menu with MENU.
3. Select Picture > Viewing Mode and press OK to access.
4. Select the mode and press OK to set.
Cinema / True Cinema / Custom
Adjust the detailed picture settings
1. Display the menu with MENU.
2. Select Picture > Advanced Settings and press OK to access.
3. Select one of the following items and press OK to access.
Contrast Control / Colour Gamut / White Balance / Colour Management /
Gamma / Reset to Defaults
4. Set the item and press OK to store.
Contrast Control
Contrast Control
(Custom / Auto / Off)
Automatically adjusts the detailed contrast settings. Select Custom to set
Contrast Control Setting manually.
Contrast Control Setting
Adaptive Gamma Control:
Adjusts the gamma curve to make the image brighter.
Black Expander:
Gradually adjusts the shades of black.
Clear White Effect:
Makes the white area clearer.
Reset to Defaults:
Resets items for Contrast Control Setting.
- 70 -
Colour Gamut
Colour Gamut
(Auto / Normal / Native)
Reproduces image colour precisely according to the colour gamut standards.
Auto:
Automatically adjusts the colour gamut according to the input signal.
Normal:
Displays colours according to the colour gamut.
Native:
Displays deep colours by expanding the colour gamut to its maximum.
White Balance
R-Gain / G-Gain / B-Gain
Adjusts the white balance of bright red / green / blue areas.
R-Cutoff / G-Cutoff / B-Cutoff
Adjusts the white balance of dark red / green / blue areas.
More Detailed Adjustment
Adjusts more detailed items for White Balance.
Input Signal Level:
Adjusts the input signal level.
R-Gain / G-Gain / B-Gain:
Adjusts the detailed white balance of bright red / green / blue areas.
Reset to Defaults:
Resets items for More Detailed Adjustment.
Reset to Defaults
Resets White Balance to the default settings.
- 71 -
Colour Management
R-Hue / R-Saturation / R-Luminance
Adjusts the picture hue / saturation / luminance of red areas.
G-Hue / G-Saturation / G-Luminance
Adjusts the picture hue / saturation / luminance of green areas.
B-Hue / B-Saturation / B-Luminance
Adjusts the picture hue / saturation / luminance of blue areas.
More Detailed Adjustment
Adjusts more detailed items for Colour Management.
C-Hue / M-Hue / Y-Hue:
Adjusts the picture hue of cyan / magenta / yellow areas.
C-Saturation / M-Saturation / Y-Saturation:
Adjusts the saturation of cyan / magenta / yellow areas.
Reset to Defaults:
Resets items for More Detailed Adjustment.
Reset to Defaults
Resets Colour Management to the default settings.
- 72 -
Gamma
Gamma
Switches the gamma curve.
Please note the numerical values are reference for the adjustment.
More Detailed Adjustment
Adjusts more detailed items for Gamma.
Input Signal Level:
Adjusts the input signal level.
Gain:
Adjusts the gain of gamma for selected signal level.
Reset to Defaults:
Resets items for More Detailed Adjustment.
Reset to Defaults
Resets Gamma to the default settings.
Reset to Defaults
Reset to Defaults
Resets Advanced Settings to the default settings.
- 73 -
Option Settings
1. Display the menu with MENU.
2. Select Picture > Option Settings and press OK to access.
3. Select one of the following items and press OK to access.
Game Mode / Film Cadence Mode / 1080p Pure Direct / 4K Pure Direct
/ 1080p Pixel by 4pixels / HDMI Content Type / HDMI RGB Range / AV
Colour System / 3D-COMB
4. Set the item and press OK to store.
Game Mode
(On / Off)
Provides suitable images for fast response signals when playing games.
Not valid in the following conditions:
TV mode
1080p Pixel by 4pixels is set to On.
1080p Pure Direct is set to On.
4K Pure Direct is set to On.
To display a continuous record of time spent using Game Mode, set
Playing Time Display.
Film Cadence Mode
(Auto / On / Off)
Improves vertical resolution for movie images.
This function is available for interlaced signals (except in the mode of multi
window, Network services or when Game Mode is set to On).
1080p Pure Direct
(On / Off)
Reproduces the original image quality in detail for 1080p (HDMI) input signal.
Not valid in the following conditions:
Multi window
1080p Pixel by 4pixels is set to On.
- 74 -
4K Pure Direct
(On / Off)
Reproduces the original image quality in detail for 4K (HDMI) input signal.
Not valid in multi window mode
1080p Pixel by 4pixels
(On / Off)
Displays like pixel by pixel to make the image sharper for 1080p signal.
For HDMI
Not all image may be displayed as pixel by pixel precisely.
Not valid in multi window mode
HDMI Content Type
(Graphics / Photos / Auto / Off)
Adjusts the picture settings of each HDMI input according to the selected
content type.
Auto:
Automatically adjusts the picture settings according to the received
HDMI content if the connected equipment supports HDMI Content
Type.
To set the availability of each content type for Auto mode, select Auto
Detail Setting.
For HDMI
HDMI RGB Range
(Auto / Full / Normal)
Adjusts the black level of the image for each HDMI input.
When the black level is not suitable, select Full.
For HDMI
AV Colour System
(Auto / PAL / SECAM / M.NTSC / NTSC)
Selects optional colour system based on video signals.
For AV (VIDEO)
- 75 -
3D-COMB
(On / Off)
Makes still or slow moving pictures more vivid.
Occasionally, while viewing still or slow moving pictures, colour patterning
may be seen. Set to On to display sharper and more accurate colours.
For PAL / NTSC signal reception in TV mode or from composite
connection
- 76 -
Screen Settings
1. Display the menu with MENU.
2. Select Picture > Screen Settings and press OK to access.
3. Select one of the following items and press OK to access.
16:9 Overscan / Zoom Adjustments / Screen Display
4. Set the item and press OK to store.
16:9 Overscan
(On / Off)
Selects the screen area displaying the image for 16:9 aspect.
On:
Enlarges the image to hide the edge of the image.
Off:
Displays the image in the original size.
Set to On if noise occurs on the edge of the screen.
This function can be memorised for SD (Standard definition) and HD (High
definition) signals respectively.
Not valid in the following conditions:
4K content
Photo content
Game Mode is set to On.
1080p Pixel by 4pixels is set to On.
1080p Pure Direct is set to On.
4K Pure Direct is set to On.
Multi window
Zoom Adjustments
Adjusts the vertical position and size when aspect is set to Zoom.
Not valid in the following conditions:
4K content
Multi window
- 77 -
Screen Display
(On / Off)
Turns the screen off when you select Off.
This function is effective in reducing power consumption when listening to
the sound without watching the TV screen.
Press any buttons (except Standby On / Off switch) to turn the screen on.
- 78 -
Copy Adjustment
Copies the picture settings of True Cinema or Custom to those of the other
input mode or Viewing Mode.
1. Display the menu with MENU.
2. Select Picture > Copy Adjustment > Destination Viewing Mode /
Destination Input and press OK to access.
3. Select the destination to copy to and press OK to set.
4. Select Copy Start and press OK to copy.
5. When a confirmation screen is displayed, select Yes and press OK to set.
= Note =
Option Settings and Screen Settings are not copied.
- 79 -
For best audio
Sound mode
1. Display the menu with MENU.
2. Select Sound > Mode and press OK to access.
3. Select the mode and press OK to set.
Mode
(Standard / Music / Ambience / User)
Selects your favourite sound mode for each input.
Standard:
Provides the suitable sound quality for all types of scenes.
Music:
Improves sound quality for watching music videos, etc.
Ambience:
Improves spatial effects and provides clear sounds.
User:
Adjusts the sounds manually using the equaliser to suit your favourite
sound quality.
The following items can be adjusted and stored for each mode.
Bass / Treble / Surround / Bass Boost
For the User mode, Equaliser is available in the Sound Menu instead of
Bass and Treble. Select Equaliser and adjust the frequency.
Watching > For best audio > Basic settings
This function is effective only for the sound from TV speakers.
- 80 -
Basic settings
1. Display the menu with MENU.
2. Select Sound and press OK to access.
3. Select one of the following items and press OK to access.
Bass / Treble / Equaliser / Balance / Surround / Bass Boost
4. Set the item and press OK to store.
Bass
Adjusts level to enhance or minimise lower, deeper sound output.
Treble
Adjusts level to enhance or minimise sharper, higher sound output.
Equaliser
Adjusts the frequency level to suit your favourite sound quality.
This function is available when Mode is set to User.
Select the frequency and adjust the frequency level.
To enhance the bass sound, raise the level of the lower frequency. To
enhance the treble sound, raise the level of the higher frequency.
To reset the levels of each frequency to the default settings, select Reset
to Defaults and press OK.
This function is effective only for the sound from TV speakers.
Balance
Adjusts volume level of right and left speakers.
Surround
(Diffuse Surround / Virtual Surround / Off)
Selects surround sound settings.
Diffuse Surround:
Provides a more progressive enhancer and reverberation to simulate
improved spatial effects.
Virtual Surround:
Provides a dynamic enhancer of width and depth to simulate improved
spatial effects.
This function is effective only for the sound from TV speakers.
- 81 -
Bass Boost
(On / Off)
Enhances the effect of bass sounds.
This function is effective only for the sound from TV speakers.
- 82 -
Volume settings
1. Display the menu with MENU.
2. Select Sound and press OK to access.
3. Select one of the following items and press OK to access.
Speaker Selection / TV Speaker Setting / Headphone Volume / Auto Gain
Control / Volume Correction / Speaker Distance to Wall
4. Set the item and press OK to store.
Speaker Selection
(TV / Home Cinema)
Enables controlling the theatre speaker with this TV’s remote control by
pointing at the TV’s signal receiver.
TV:
TV speakers are active.
Home Cinema:
The sound is delivered from theatre speakers. Player theatre, Blu-
ray Disc theatre or Amplifier will be automatically turned on if it is in
Standby mode.
The sound of TV speakers is mute. When the equipment is turned
off, TV speakers will be activated.
You can use Volume Up / Down and MUTE.
This function is available when the theatre speakers supporting VIERA
Link function is connected to this TV.
TV Speaker Setting
(TV Speaker / Headphone / Off)
Selects the sound output to adjust volume.
Sound from TV speaker turns off when Headphone or Off is selected.
Headphone Volume
Adjusts the volume of headphones.
- 83 -
Auto Gain Control
(On / Off)
Automatically regulates large sound level differences between channels and
inputs.
Volume Correction
Adjusts the volume of each individual channel or input mode.
Speaker Distance to Wall
(Up to 30cm / Over 30cm)
Compensates for the low frequency sound due to the distance between the
speakers and the wall.
If the back space between the TV and wall is within 30 cm, Up to 30cm is
recommended.
If the back space between the TV and wall is over 30 cm, Over 30cm is
recommended.
This function is effective only for the sound from TV speakers.
- 84 -
Voice Guidance Settings
1. Display the menu with MENU.
2. Select Sound > Voice Guidance Settings and press OK to access.
3. Select one of the following items and press OK to access.
Voice Guidance / Speed / Volume / Language / User Level / Web Browser
4. Set the item and press OK to store.
Voice Guidance
(On / Off)
Set to On to enable voice guidance of the basic features (on-screen
messages, etc.) for visually impaired users.
Not valid in multi window mode
Speed
(Fast / Normal / Slow)
Selects the readout speed for the voice guidance.
Volume
(Max / Mid / Min)
Selects the volume for the voice guidance.
Language
Changes language for the voice guidance.
All languages may not be available. When the selected language is not
supported, Language is set to English automatically.
User Level
(Beginner / Expert)
Selects the level of verbosity for the voice guidance.
Web Browser
(On / Off)
Set to On to enable voice guidance of the network content in web browser
function.
- 85 -
= Note =
Voice guidance function may not correspond exactly.
- 86 -
Audio Description
1. Display the menu with MENU.
2. Select Sound > Audio Description and press OK to access.
3. Select one of the following items and press OK to access.
Preferred Audio Type / Volume / Speakers / Headphones
4. Set the item and press OK to store.
Preferred Audio Type
(Audio Description / Standard)
Narration settings for visually impaired users
Set to Audio Description to activate the narration sound track when available
on the broadcast.
The availability of audio description sound track is indicated by AD in the
information banner.
For DVB
Volume
Adjusts the volume for Audio Description.
For DVB
Speakers
(Mix / Standard)
Set to Mix to activate the description sound track from TV speakers.
For DVB
Headphones
(Mix / Standard)
Set to Mix to activate the description sound track from headphones.
For DVB
- 87 -
Advanced settings
1. Display the menu with MENU.
2. Select Sound and press OK to access.
3. Select one of the following items and press OK to access.
MPX / Audio Preference / SPDIF Selection / HDMI Audio Format / PCM
Optical Level / SPDIF Delay / HDMI Input
4. Set the item and press OK to store.
MPX
Selects multiplex sound mode (if available).
Stereo:
Use this normally.
Mono:
When stereo signal cannot be received
M1 / M2:
Available while mono signal is transmitted
For Analogue
Audio Preference
(Auto / Multichannel / Stereo / MPEG)
Selectable options vary depending on the country you select.
Selects the initial setting for audio tracks.
Auto:
Automatically selects the audio tracks if a programme has two or more
tracks. The priority is given in the following order - Dolby Digital Plus,
HE-AAC, Dolby Digital, MPEG.
Multichannel:
The priority is given to multi-channel audio track.
Stereo:
The priority is given to stereo (2ch) audio track.
MPEG:
The priority is given to MPEG.
Dolby Digital Plus and Dolby Digital are the methods of coding digital
signals developed by Dolby Laboratories. Apart from stereo (2ch) audio,
these signals can be multi-channel audio.
- 88 -
HE-AAC is a perceptual coding method used to compress digital audio for
efficient storage and transmission.
MPEG is an audio compression method that compresses audio to the
smaller size without any considerable loss of audio quality.
Dolby Digital Plus and HE-AAC are the technologies for HD (High
definition) programmes.
For DVB
SPDIF Selection
(Auto / PCM)
Selects the initial setting for digital audio output signal from DIGITAL AUDIO
and HDMI2 (ARC function) terminals.
SPDIF is a standard audio transfer file format.
Auto:
Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output
as Dolby Digital Bitstream. MPEG is output as PCM.
PCM:
Digital output signal is fixed to PCM.
ARC (Audio Return Channel) is a function of digital audio output using
HDMI cable.
For DVB, video content
Media Player > Video mode > Audio output settings
Network > Videos > Audio output settings
HDMI Audio Format
(Auto / Bitstream / PCM)
Selects the audio format for the HDMI input signal.
Auto:
When the TV speakers are active, audio format is fixed to PCM. When
the sound is delivered from theatre speakers, audio format is fixed to
Bitstream.
Bitstream:
Dolby Digital Plus and Dolby Digital are output as Dolby Digital
Bitstream. Other digital audio output signals are output as PCM.
PCM:
Digital audio signal is output as PCM.
- 89 -
PCM Optical Level
Adjusts the audio level of PCM output from DIGITAL AUDIO and HDMI2 (ARC
function) terminals to equalise with that of the other audio types.
SPDIF Delay
Adjusts the delay time of the sound output from DIGITAL AUDIO and HDMI2
(ARC function) terminals if the sound does not synchronise the image.
For DVB
HDMI Input
(Digital / Analogue)
Selects to fit the input signal.
Watching > External equipment > HDMI features
Digital:
When sound is carried via the HDMI cable connection
Analogue:
When sound is not carried via the HDMI-DVI adaptor cable connection
For HDMI
- 90 -
TV Guide
Using TV Guide
TV Guide - Electronic Programme Guide (EPG) provides an on-screen listing
of the programmes currently broadcast and the forthcoming broadcasts over
the next seven days (depending on the broadcaster).
Not valid in Analogue
1. Select the mode with TV.
DVB-S / DVB-C / DVB-T / DVB-via-IP
2. Display TV Guide with GUIDE.
Press OPTION to change the layout. (Landscape / Portrait)
– View Landscape to see several channels.
– View Portrait to see one channel by time.
The availability of this function depends on the country you select.
(Example)
TV screen
Date
Time
Programme
Channel position and name
- 91 -
To watch the programme
1) Select the current programme and press OK to access.
The current programme is displayed on the top left of the screen.
2) Select View and press OK to watch.
To use Timer Programming
Watching > TV Guide > Timer Programming
To the previous day
(red)
To the next day
(green)
To view a channel list of the selected type
1) Display the type list with
(yellow).
2) Select the type and press OK to view.
To search programme titles and view a list of the searched programmes (if
available)
1) Display the search list with
(yellow).
2) Select Search and press OK to access.
3) Enter characters with Cursor buttons or Numeric buttons, and press OK
to set.
4) Press (green) to start searching.
All the programme titles including the word you set are listed.
Searching without any characters lists all programmes including
current programmes.
To view a channel list of the selected category
1) Display the category list with
(blue).
2) Select the category and press OK to view.
To list favourite channels, set Favourites Edit.
Watching > Tuning and editing channels > Favourites Edit
To view more details of the programme
1) Select the programme.
2) Press
to view.
Press again to return to TV Guide.
- 92 -
To exit TV Guide
EXIT
= Note =
When this TV is turned on for the first time, or the TV is switched off for
more than a week, it may take some time before TV Guide is completely
shown.
- 93 -
Timer Programming
This function allows you to select programmes that you want to record to the
USB HDD.
1. Display TV Guide with GUIDE.
2. Select the forthcoming programme and press OK to access.
You can also set a timer event pressing .
To check / change / cancel a timer event
Recording > Timer Programming > Editing Timer Programming
LED turns to orange in Standby mode when Timer Programming is set.
To return to TV Guide
BACK/RETURN
If you select the current programme, a confirmation screen asking
whether you want to watch or record the programme appears. Select
Timer Programming and press OK to set USB HDD Rec. to record from
the time you finish the timer event setting.
is displayed on the TV Guide screen if Timer Programming is set
from TV Guide.
Depending on the country you select, you can set Signal Supported
Recording (see below).
= Note =
Not valid in Analogue
Timer Programming only works reliably if correct time information is
received via the signal from the broadcaster or service provider.
No other channels can be selected while recording of Timer Programming
is in progress.
When recording programmes to the USB HDD, be sure to format the USB
HDD and enable it to record in USB Device Setup.
Recording > USB HDD setup
To set timer programming events of this TV on the network equipment
(smartphone, etc.) from outside the home network
Recording > Timer Programming > Remote recording
- 94 -
Signal Supported Recording
Signal Supported Recording is Timer Programming which is controlled by
information from the TV Guide; if programme start and end times are changed
by the broadcaster, the timer event will follow the change. Note that Signal
Supported Recording only works reliably if correct information is received
from broadcasters.
The availability of this function depends on the country and TV mode you
select.
is displayed on the timer event if Signal Supported Recording is set.
= Note =
If you edit the start time or end time of a signal supported recording event
by more than 10 minutes, it will no longer follow the broadcaster’s changes
to the start or end time. The start and end times will become fixed.
- 95 -
Teletext
Viewing Teletext
1. Switch to teletext with TEXT.
Displays the index page (content varies depending on the broadcaster).
Current / sub page numbers are displayed on the top left of the screen.
Time / date is displayed on the top right of the screen.
Colour bar is displayed on the bottom of the screen.
2. Select the page with Cursor buttons, Numeric buttons or
(coloured buttons).
To adjust contrast
1) Press MENU three times to display Contrast.
2) Adjust and press OK to set.
To exit teletext
EXIT
Reveal hidden data
1. Press MENU.
2. Reveal with
(red).
Press again to hide.
To view a favourite page stored
Press STTL to view a favourite page.
Call up the page stored on (blue). (List mode)
Factory setting is “P103”.
FULL / TOP / BOTTOM
1. Press MENU.
2. Press
(green) to change the layout.
- 96 -
Watch TV and teletext in two windows at once
1. Press MENU twice.
2. Set Picture and text to On / Off.
Operations can be made only in teletext screen.
Store frequently viewed pages in the colour bar (List mode)
1. Press
(coloured buttons) while the page is displayed.
2. Press and hold OK.
The stored page number changes to white.
To change stored pages
1) Press
(coloured buttons) to change.
2) Enter a new page number with Numeric buttons.
3) Press and hold OK.
View sub page
The number of sub pages is displayed on the top of the screen. Press /
to view sub page. (Only when teletext has more than one page.)
The number of sub pages varies depending on the broadcaster (up to 79
pages).
Searching may take time while you are watching TV.
To view a specific sub page
1) Press MENU.
2) Press
(blue).
3) Enter the 4-digit number (e.g. P6, press
).
- 97 -
Teletext mode
Teletext services are the text information provided by the broadcaster.
The features may vary depending on the broadcaster.
1. Display the menu with MENU.
2. Select Setup > Display Settings > Teletext and press OK to access.
3. Select TOP (FLOF) / List and press OK to set.
TOP mode (For TOP text broadcasting)
TOP is a particular improvement of the standard teletext service that results in
an easier search and effective guide.
Fast overview of the teletext information available
Easy to use step-by-step selection of the topical subject
Page status information on the bottom of the screen
Available page up / down
(red) / (green)
To select among subject blocks
(blue)
To select next subject within the subject block
(yellow)
(After the last subject, it moves to the next subject block.)
FLOF (FASTEXT) mode (For FLOF (FASTEXT) broadcasting)
In FLOF mode, four differently coloured subjects are situated on the bottom of
the screen.
To access more information about one of these subjects, press the
appropriate coloured button.
This facility enables fast access to information on the subjects shown.
List mode
In List mode, four differently coloured page numbers are situated on the
bottom of the screen. Each of these numbers can be changed and stored in
the TV’s memory.
Watching > Teletext > Viewing Teletext
- 98 -
Teletext Character Set
Selects teletext language font.
1. Display the menu with MENU.
2. Select Setup > Display Settings > Teletext Character Set and press OK to
access.
3. Select the font and press OK to set.
West:
English, French, German, Greek, Italian, Spanish, Swedish, Turkish,
etc.
East1:
Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian, etc.
East2:
Czech, Hungarian, Lettish, Polish, Rumanian, etc.
- 99 -
Tuning and editing channels
Setting menu
You can retune channels, edit channel lists, create your favourite channel
lists, etc.
1. Select the mode with TV.
DVB-S / DVB-C / DVB-T / DVB-via-IP / Analogue
2. Display the menu with MENU.
3. Select Setup > Tuning Menu and press OK to access.
DVB-S Tuning Menu / DVB-C Tuning Menu / DVB-T Tuning Menu / DVB-
via-IP Tuning Menu / Analogue Tuning Menu
The menu name varies depending on the TV mode.
4. Select one of the functions and press OK to access.
Favourites Edit / Channel List / Auto Setup / Manual Tuning / Update
Channel List / Favourite Network / New Channel Message / Service
Replacement / Signal Condition / Attenuator / Add TV Signal
The function items vary depending on the TV mode and country you
select.
- 100 -
Favourites Edit
List favourite DVB channels
Create your favourite channel lists from various broadcasters (up to 4:
Favourites 1 to 4).
The favourites lists are available for switching in the information banner and
the TV Guide screen.
Watching > Basic > Information banner
Watching > TV Guide > Using TV Guide
1. Select Favourites Edit and press OK to access.
2. Select a channel to list from all DVB channels.
appears when the channel is encrypted.
To display other favourites
(green)
To sort channel names in alphabetical order
(red)
To change the category
(blue)
3. Press OK to add it to favourites list.
To add all channels to the list (if available)
1) Press
(yellow).
2) Press
(green) to add all.
To add consecutive channels to the list at once
1) Press
(yellow).
2) Make the channel block and press OK to add.
4. Press BACK/RETURN and OK to store.
- 101 -
Edit DVB favourites list
You can edit the favourites list while the cursor is on the channel in the
favourites list.
To move the channel
1) Select the channel.
2) Press
(green).
3) Select the new position with Cursor buttons.
4) Press (green) to store.
To delete the channel
1) Select the channel.
2) Press
(blue) to delete.
– Press
(yellow) to delete all channels.
To name the favourites
1) Press
(red).
2) Enter characters (maximum 10 characters) with Cursor buttons or
Numeric buttons, and press OK to set.
3) Press BACK/RETURN to store.
- 102 -
Channel List
Edit DVB channels
You can edit the list of All DVB Channels by adding / deleting and moving
channels.
Channels not in all DVB channels list cannot be displayed except in this
function.
1. Select Channel List and press OK to access.
To swap / move the channel position
1) Press
(green) to edit.
2) Set the new position with Cursor buttons or Numeric buttons, and
press
(green) to store.
To delete the channel
(blue)
To delete all channels
(yellow)
To add channel
1) Select a channel from Channels Found.
2) Press OK to add it to All DVB Channels.
To sort channel names in alphabetical order in Channels Found
(red)
To add all channels to the list (if available)
1) Press
(yellow).
2) Press
(green) to add all (depending on the broadcaster).
To add consecutive channels to the list at once (if available)
1) Press
(yellow).
2) Make the channel block and press OK to add.
To change the category of Channels Found
(blue)
- 103 -
2. Press BACK/RETURN and OK to store.
To exchange channel list (DVB-S)
1) Display the menu with MENU.
2) Select Setup > Other Settings > Exchange Channel List and press OK
to access.
3) Follow the on-screen instructions.
During the operation, remove USB devices other than the USB Flash
Memory used for this function.
Settings > Setup > Other Settings
Skip unwanted Analogue channels
You can hide (skip) unwanted channels. The hidden channels cannot be
displayed except in this function.
1. Select Channel List and press OK to access.
2. Select a channel.
3. Press OK to set Reveal / Hide (skip).
: Reveal
: Hide (skip)
To reveal all channels (if available)
(yellow)
- 104 -
Edit Analogue Channels
To swap / move the channel position (if available)
1) Press
(green) to edit.
2) Set the new position with Cursor buttons and press
(green) to
store.
To retune each channel (Manual Tuning)
(red)
To rename the channel name
1) Press
(blue) to edit.
2) Enter characters (maximum 5 characters) with Cursor buttons or
Numeric buttons, and press OK to set.
3) Press BACK/RETURN to store.
= Note =
If a VCR is connected only with the RF cable in Analogue, edit VCR.
- 105 -
Auto Setup
Automatically retunes the channels received in the area.
This function is available if channel tuning is already performed.
Only the selected mode is retuned. All the previous tuning settings are
erased.
Child Lock PIN number is required to retune locked channels.
Functions > Child Lock > PIN number
If tuning has not been done completely, set Manual Tuning.
Watching > Tuning and editing channels > Manual Tuning
DVB-S
1. Select Antenna System and press OK to access.
2. Select One LNB / MiniDiSEqC / DiSEqC 1.0 / Single Cable and press OK
to set.
One LNB:
Compatible with single LNB.
MiniDiSEqC:
Up to 2 LNBs can be controlled.
DiSEqC 1.0:
Up to 4 LNBs can be controlled.
Single Cable:
When using the Single Cable router, up to 32 user bands are available.
You can receive several satellites if you have DiSEqC control antenna
system.
This TV supports DiSEqC Version 1.0.
3. Select LNB Configuration and press OK to access.
4. Select LNB / Satellite and set.
1) Set LNB first.
If you set to One LNB, LNB is not selectable.
If you set to MiniDiSEqC or Single Cable, select from LNB AA and
AB.
If you set to DiSEqC 1.0, select from LNB AA, AB, BA and BB.
2) Set Satellite for the selected LNB.
– Select No Satellite if you do not know the connected satellite.
(Available satellite is searched in Auto Setup.)
- 106 -
– Select User defined to set Test Transponder Frequency manually.
If you set to Single Cable, additional settings are required. Set
SingleCable Version, User Band, User Band Frequency and PIN
(depending on the Single Cable router you use). For details, read
the manual of the Single Cable router.
Watching > Tuning and editing channels > Selectable satellites
5. Press BACK/RETURN to store.
6. Select Auto Setup and press OK to access.
7. Select Search Mode / Scan Mode and press OK to access.
8. Set the item and press OK to store.
Scan Mode
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency for the selected satellite.
After settings, select Start scan and press OK to search.
9. A confirmation screen is displayed and press OK to start Auto Setup.
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
be displayed.
DVB-C, DVB-T, Analogue
1. Select Auto Setup and press OK to access.
2. Set DVB-C Auto Setup Settings and press OK to store. (DVB-C)
Scan Mode
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency in your country.
Normally set Frequency, Symbol Rate and Network ID to Auto. If Auto
is not displayed or if necessary, enter each value specified by your
cable provider with Numeric buttons.
After settings, select Start scan and press OK to search.
- 107 -
3. A confirmation screen is displayed and press OK to start Auto Setup.
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
be displayed.
DVB-via-IP
Ensure the network connections and network settings are completed.
Functions > DVB-via-IP > DVB-via-IP client connection
Network > Network settings
1. Select Auto Setup and press OK to access.
2. A confirmation screen is displayed and press OK to access.
3. Select a server from Server List.
1) Select a server and press OK to set.
2) Select Search Channels and press OK to access.
4. Select a search mode and press OK to access.
5. Set Client Settings.
1) Select Client Settings and press OK to access.
2) Select Unicast Environment / Multicast Environment and press OK to
set.
Select Unicast Environment to use in a home network.
Select Multicast Environment to use in multi family housing units,
hotel, hospital, etc. (All servers are selected automatically.)
3) Select Server List and press OK to access.
6. Select Search Channels and press OK to access.
7. Set DVB-via-IP Search Mode and press OK to start Auto Setup. (Settings
are made automatically.)
Set DVB-via-IP Satellite Configuration to tune DVB-S channels.
When the operation is completed, the channel at the lowest position will
be displayed.
- 108 -
Auto Setup using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu.
2. Set Auto Setup with following control panel buttons.
Move the cursor / select from a range of options / select the menu item
Access the menu / store settings after adjustments have been made or
options have been set with INPUT/OK/HOLD for MENU button
- 109 -
Manual Tuning
Normally use Auto Setup or Update Channel List to retune DVB channels.
If tuning has not been done completely or for adjusting the direction of the
aerial or dish, use this function. (DVB)
All DVB channels found are added to Channel List.
DVB-S
Please consult the received satellite broadcasting companies for the
setting.
1. Select Transponder Frequency / Symbol Rate / Polarisation / Modulation /
Service ID and set with Cursor buttons or Numeric buttons.
2. Select Start scan and press OK to search.
DVB-C
1. Enter the frequency with Numeric buttons.
Normally set Symbol Rate and Service ID to Auto.
2. Select Start scan and press OK to search.
DVB-T
1. Select a channel and adjust frequency for each channel.
Set where the level of Signal Quality becomes the maximum.
2. Press OK to search.
- 110 -
Analogue
Set Analogue channel manually after Auto Setup.
Set Sound System and Colour System, and then perform this function.
Normally set Colour System to Auto.
SC1: PAL B, G, H / SECAM B, G
SC2: PAL I
SC3: PAL D, K / SECAM D, K
F: SECAM L, L
1. Select the channel position with Numeric buttons.
2. Select the channel with Channel Up / Down.
3. Set Manual Tuning.
4. Select Store and press OK to set.
Use Fine Tuning to make small adjustments to the tuning of an individual
programme (affected by weather conditions, etc.).
If a VCR is connected only with the RF cable, select channel position 0.
DVB-via-IP (DVB-S)
Please consult the received satellite broadcasting companies for the
setting.
1. Select Transponder Frequency / Symbol Rate / Polarisation / Modulation /
FEC / Service ID and set with Cursor buttons or Numeric buttons.
2. Select Start scan and press OK to search.
- 111 -
DVB-via-IP (DVB-C)
1. Select Frequency / Bandwidth / Modulation Type / Symbol Rate / FEC /
Service ID and set with Cursor buttons or Numeric buttons.
Normally set Symbol Rate to Auto.
2. Select Start scan and press OK to search.
DVB-via-IP (DVB-T)
1. Select Frequency / Bandwidth / Modulation / FEC / Service ID and set with
Cursor buttons or Numeric buttons.
2. Select Start scan and press OK to search.
= Note =
For details of DVB-via-IP connections
Functions > DVB-via-IP > DVB-via-IP client connection
Not valid when Client Settings is set to Multicast Environment (DVB-via-IP)
- 112 -
Update Channel List
By updating the DVB channel list, you can add new channels, delete removed
channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in Favourites Edit,
Channel List, Child Lock, etc.
Depending on the signal condition, the update may not work properly.
To update DVB-S channels, set Search Mode and Scan Mode before
updating.
1) Select Search Mode / Scan Mode and press OK to access.
2) Set each item and press OK to store.
3) After settings, select Start scan and press OK to search.
= Note =
Not valid when Client Settings is set to Multicast Environment (DVB-via-IP)
- 113 -
Signal Condition
Selects a channel and checks the signal condition with indicators.
A good Signal Strength is not an indication of suitable signal reception.
Vertical lines show the maximum signal value of the selected channel.
To change the channel
For DVB
- 114 -
Other settings
Favourite Network
Selects your favourite network for each broadcaster (only available in some
countries).
For DVB-C, DVB-T
New Channel Message
Selects whether to give a notification message when a new DVB channel is
found or not.
When a notification message appears, you can perform Update Channel
List pressing OK.
Not valid in DVB-via-IP
Service Replacement
(On / Off)
Set to On to display a message to switch to the available service (only
available in some countries).
For DVB-C, DVB-T
Attenuator
(On / Off)
Automatically reduces the DVB-C signal to avoid the interference.
If the DVB-C signal is too strong, interference may occur. In this case, set
to On to weaken the signal automatically.
Add TV Signal
Adds the TV mode.
Allows you to add any TV mode which was skipped during initial Auto
Setup.
- 115 -
Selectable satellites
Selectable satellites and dish alignment to tune DVB-S
channels
To ensure your satellite dish is correctly installed, please consult your local
dealer.
Also please consult the received satellite broadcasting companies for details.
Intelsat at 85.2° East
ABS 1 at 75° East
Express at 53° East
Intelsat at 45° East
Turksat at 42° East
Express at 40° East
Hellas at 39° East
Eutelsat at 36° East
Eutelsat at 33° East
Astra at 28.2° East
Arabsat at 26° East
Eutelsat at 25.5° East
Astra at 23.5° East
Eutelsat at 21.5° East
Astra at 19.2° East
Eutelsat at 16° East
Hot Bird at 13° East
Eutelsat at 10° East
Eutelsat at 9° East
Eutelsat at 7° East
Astra at 4.8° East
Thor at 0.8° West /
Intelsat at 1° West
Amos at 4° West
Eutelsat at 5° West
Eutelsat at 7° West
Eutelsat at 8° West
Eutelsat at 12.5° West
Telstar at 15° West
NSS at 22° West
Intelsat at 24.5° West
Hispasat at 30° West
- 116 -
Recording
USB HDD setup
Preparations
You can record the digital TV programmes to the connected USB HDD and
enjoy playing back in various ways.
Prepare the USB HDD for the exclusive use of recording with this TV.
Connect the USB HDD to the USB 2 port with the USB cable.
Be sure to connect the USB HDD to the mains socket.
To remove the USB HDD safely from the TV, perform Safely remove USB
in USB Device Setup.
Recording > USB HDD setup > Setting for USB HDD
Check the terminal type and cable plugs are correct for connection.
USB 2 port
USB cable
USB HDD
Mains socket
= Caution =
All data in the USB HDD will be erased in the following cases:
When formatting the USB HDD with this TV
Recording > USB HDD setup > Setting for USB HDD
When formatting the USB HDD to use on PC, etc.
When the TV is repaired due to a malfunction, you may have to format
the USB HDD again with this TV to use it. (All data will be erased after
formatting.)
To use the USB HDD with your PC after recording with this TV, format it
again on your PC. (Special operations or tools may be necessary to format
on your PC. For details, read the manual of the USB HDD.)
- 117 -
The data recorded on the USB HDD with this TV can only be played back
on this TV. You cannot play back its content with another TV (including the
TV of the same model number) or any equipment.
Do not turn the TV off, pull out the mains plug or remove the USB HDD
during operation (formatting, recording, etc.). Doing so may cause
malfunction of the device or damage the recorded data. (An electric
outage may also be a cause of malfunction.)
= Note =
Analogue TV programme cannot be recorded on the USB HDD.
The data broadcasting (MHEG, etc.), radio broadcasting are not recorded,
and also the recording function does not work during the period without
any signal.
Not all the programmes can be recorded depending on the broadcaster
and service provider.
Depending on the network condition, recording function may not work
properly in DVB-via-IP.
You cannot copy the recorded TV programmes of the USB HDD.
For details of the USB HDD
Recording > Technical information > USB HDD
- 118 -
Setting for USB HDD
Format and set up the USB HDD with this TV in order to use it for recording.
All the USB devices recognised as a mass storage device are listed.
Please note that USB HDD will be formatted and all data in it will be
erased after this setup.
Before setting, connect the USB HDD and be sure to turn on the USB
HDD.
Recording > USB HDD setup > Preparations
1. Display the menu with MENU.
2. Select Setup > USB Device Setup and press OK to access.
3. Select the USB HDD for recording and press OK to start setup.
Some USB HDD may not be displayed.
To display information of the highlighted device
4. When the caution and confirmation screen for using USB HDD is
displayed, select Yes and press OK to proceed.
5. When a confirmation screen of USB HDD name is displayed, select Yes
and press OK to set.
The name for the USB HDD is created automatically. If you want to edit
the name, select Yes.
1) Enter characters with Cursor buttons or Numeric buttons, and press
OK to set.
2) Press BACK/RETURN to store.
6. When a confirmation screen to enable USB HDD for recording is
displayed, select Yes and press OK to set.
If another formatted USB HDD for recording already exists, this
confirmation screen will be displayed to switch to enable this USB HDD
for recording.
- 119 -
Mode of the USB HDD
: The USB HDD is available for recording / playing back.
Only one USB HDD on the list is available for recording.
: The USB HDD is available for playing back.
To change the mode
OK
To edit USB HDD name
(green)
To format
(red)
To remove the USB HDD safely from the TV
(yellow)
= Note =
You can only select one USB HDD for recording at a time.
You cannot change the settings for the USB HDD while recording is in
progress.
- 120 -
Recording current programme
One Touch Recording
Records the current programme to the USB HDD immediately.
Confirm the remote control code is “73”.
Watching > External equipment > Operating with TV’s remote control
1. Display the menu with MENU.
2. Select Setup > Recording Setup > One Touch Recording and press OK to
access.
3. Select the maximum recording time 30 / 60 / 90 / 120 / 180 (minutes) and
press OK to set.
To start One Touch Recording
Press to start.
Other channels cannot be selected while recording is in progress.
To stop recording in progress
Press to stop.
To play back or delete the recorded content
Recorded TV programmes can be played back in Media Player.
1. Display Home Screen with HOME.
2. Select Devices and press OK to access.
3. Select USB HDD for recording and press OK to access.
Media Player > Recorded TV mode
Even if One Touch Recording is in progress, you can play back all the
content. (Depending on the USB HDD, playback may not be possible or
the recording may not work properly during playback.)
- 121 -
REW LIVE TV
Records the current programme to the USB HDD constantly within the
maximum recordable time.
Confirm the remote control code is “73”.
Watching > External equipment > Operating with TV’s remote control
1. Display the menu with MENU.
2. Select Setup > Recording Setup > REW LIVE TV and press OK to access.
3. Select Auto to start REW LIVE TV.
When you select Auto, recording will start automatically.
This recording may not start if another recording is in progress, TV signal
condition is bad or there are no images displayed.
To operate REW LIVE TV
To pause
To search backward (up to 90 minutes)
After pausing or searching backward, the following buttons are available
for operation.
: Search backward
: Search forward
: Return to the current programme
OK : Playback / Pause
: Search backward / Search forward
: Pause / Resume
: Playback
: Return to the current programme
- 122 -
To stop REW LIVE TV
1. Display the menu with MENU.
2. Select Setup > Recording Setup > REW LIVE TV and press OK to access.
3. Select Off to stop REW LIVE TV.
If you stop REW LIVE TV, the recorded content for REW LIVE TV will be
deleted.
REW LIVE TV is stopped and the recorded content is deleted
automatically in the following conditions: (Even if REW LIVE TV stops for
the following conditions, as long as the setting is Auto, a new recording
starts automatically in a condition that makes the recording available.)
Other channels selected
Locked channel selected
Invalid channel selected
No TV signal
External input selected
When the full-screen application (TV Guide, Media Player, eHELP, etc.)
is launched
When the TV enters Standby or is turned off
When another recording starts
- 123 -
Timer Programming
Setting Timer Programming
This function allows you to select programmes that you want to record to the
USB HDD.
Not valid in Analogue
1. Select the mode with TV.
DVB-S / DVB-C / DVB-T / DVB-via-IP
2. Display the menu with MENU.
3. Select Timer > Timer Programming and press OK to access.
4. Press OK to start making the settings.
USB HDD Rec.:
Records the programme to the USB HDD.
5. Select and set the item (channel, date, start time, end time).
and can also be entered with Numeric buttons.
- 124 -
(Example)
!: Overlapped timer events
Function (USB HDD Rec.)
TV mode
: DVB-S
: DVB-C
: DVB-T
: DVB-via-IP
You cannot change the mode within the menu.
Channel position, channel name, etc.
: Signal Supported Recording (if available)
Watching > TV Guide > Timer Programming
Date
Daily Sun-Sat: Sunday to Saturday
Daily Mon-Sat: Monday to Saturday
Daily Mon-Fri: Monday to Friday
Weekly Sun / Mon / Tue / Wed / Thu / Fri / Sat: Same time on the
same day every week
Start time / End time / Duration (automatic display)
6. Store with OK.
- 125 -
Editing Timer Programming
1. Display the menu with MENU.
2. Select Timer > Timer Programming and press OK to access.
3. Select the event.
To change a timer event
OK
Correct as necessary.
Recording > Timer Programming > Setting Timer Programming
To delete a timer event
1) Press
(red).
2) Press OK to delete.
To play back or delete the recorded content
Recorded TV programmes can be played back in Media Player.
1. Display Home Screen with HOME.
2. Select Devices and press OK to access.
3. Select USB HDD for recording and press OK to access.
Media Player > Recorded TV mode
- 126 -
Remote recording
You can set timer programming with the network equipment (smartphone,
etc.) from outside the home network using TV Anywhere function.
Ensure the network connections and network settings are completed.
Network > Network connections
Network > Network settings
Set TV Anywhere to On to use this function.
Functions > TV Anywhere
To use TV Anywhere function, you need to install the application for
controlling VIERA on your smartphone.
Support > FAQs > Detailed information
For the operations, refer to the support information of the application.
= Note =
This function is not available when the TV is turned off with Mains Power
On / Off switch.
Due to network conditions or certain broadcaster restrictions, this function
may not be available.
- 127 -
Note
TV Guide may also be used to set timer event.
Watching > TV Guide > Timer Programming
Timer Programming can store up to 15 events.
Timer Programming only works reliably if correct time information is
received via the signal from the broadcaster or service provider.
For recording using Timer Programming, the TV must be either on or in
Standby.
No other channels can be selected while recording of Timer Programming
is in progress.
Recording an encrypted (copy-protected) programme may not be possible.
Depending on the network condition, recording function may not work
properly in DVB-via-IP.
When the start time comes, the channel will be switched automatically and
the video and audio signals will be output. 2 minutes before the start time,
a reminder message appears if you are watching TV.
To remove the message and start the programming, press OK.
To cancel the programming, press EXIT.
LED turns to orange in Standby mode when Timer Programming is set.
“!” identifies that two or more timer events are overlapped. As for the
overlapped recording events, the first event starts and finishes as
programmed. The next event can then start.
The recording of Timer Programming automatically changes the channel to
the programmed channel a few seconds before the start time.
For details of the USB HDD
Recording > Technical information
- 128 -
Technical information
USB HDD
USB HDD
(for recording the digital TV programmes with this TV)
The capacity of USB HDD that works with this TV is from 160 GB to 3 TB.
Connect the USB HDD to the mains socket to record and play back
properly with this TV.
Use the USB HDD formatted with this TV.
Recording > USB HDD setup > Setting for USB HDD
Regarding performance, not all USB HDDs are guaranteed.
= Note =
Data modified with a PC may not be displayed.
Do not remove the device while the TV is accessing data. Otherwise this
can damage the device or TV.
Do not touch the pins on the device.
Do not subject the device to a high pressure or impact.
Insert the device in the correct direction. Otherwise this can damage the
device or TV.
Electrical interference, static electricity, or erroneous operation may
damage the data or device.
- 129 -
Media Player
Using Media Player
Information
Media Player allows you to enjoy photo, video or music recorded on the USB
Flash Memory / USB HDD / network device, and content recorded with this
TV to the formatted USB HDD.
(Example)
Photo mode:
Still pictures recorded with digital cameras are displayed.
Video mode:
Moving pictures recorded with digital video cameras and digital video data
are played back.
Music mode:
Digital music data are played back.
Recorded TV mode:
(For exclusive USB HDD) TV programmes recorded on the USB HDD with
this TV are played back.
During the operation, audio signal is output from DIGITAL AUDIO and
HDMI2 (ARC function) terminals. But no video signals are output. To use
HDMI2 with ARC function, connect an amplifier that has ARC function and
set to use theatre speakers.
Functions > VIERA Link “HDAVI Control™”
Date shows the date on which the recording was made by the recording
equipment. For a file without a valid record date “ ” is shown.
Pictures may not appear correctly on this TV depending on the recording
equipment used.
Displaying may take some time when there are many files and folders.
Partially degraded files may be displayed with reduced resolution.
Picture setting may not work depending on the condition.
Folder and file names may be different from those on the digital camera or
digital video camera used.
- 130 -
To insert or remove the USB Flash Memory
Ensure alignment is straight and complete when inserting or removing.
To remove the USB Flash Memory safely from the TV, perform Safely
remove USB in USB Device Setup.
1) Display the menu with MENU.
2) Select Setup > USB Device Setup and press OK to access.
3) Select the device and press
(yellow) to set.
Connect the USB Flash Memory to the USB 1 or 2 port.
= Note =
To connect the USB HDD
Recording > USB HDD setup
Check the terminal type and devices are correct for connection.
For details of the devices
Media Player > Technical information
For details of supported file formats
Media Player > Technical information
- 131 -
Selecting device / mode
1. Insert the USB Flash Memory to the TV.
Media Player > Using Media Player > Information
To play back content in the USB HDD, ensure the connection and
settings are completed.
Recording > USB HDD setup
To play back content in the network device, ensure the connection and
settings are completed.
Media Player > Using Media Player > Network device
2. Display Home Screen with HOME.
3. Select Devices and press OK to access.
4. Select the device (USB Flash Memory / USB HDD / network device) and
press OK to access.
When a confirmation screen about the network device is displayed,
enter User / Password to access.
5. Select Photo / Video / Music / Recorded TV and press OK to access.
Photo
Media Player > Photo mode
Video
Media Player > Video mode
Music
Media Player > Music mode
Recorded TV
Media Player > Recorded TV mode
6. The thumbnail view is displayed.
(Example)
To display / hide information of the highlighted content
- 132 -
= Note =
Recorded TV is available for content recorded on the USB HDD with this
TV.
Select the appropriate device and content for playing back each file.
You can use the following buttons during playback. Confirm the remote
control code is “73”.
Watching > External equipment > Operating with TV’s remote control
To change the mode
You can switch to another mode of Media Player from the thumbnail view.
1. Display the content selection screen with
(blue) while the thumbnail is
displayed.
2. Select the content and press OK to access.
The mode can be switched in the current device.
- 133 -
Network device
You can enjoy photo, video or music stored in the network devices.
To enable this function, connect this TV to your home network.
Network > Network connections
Network > Network settings
How to set User / Password
1. Display the menu with MENU.
2. Select Network > File Sharing Settings > Network Device List and press
OK to access.
3. Select the network device and press OK to access.
4. Enter User / Password with Cursor buttons or Numeric buttons and press
OK to set.
Press BACK/RETURN to store.
To register the new network device, set Server Name / Shared Folder.
For details, read the manual of the equipment.
5. Select Register and press OK to set.
To delete the registered device, select Delete and press OK to set.
= Note =
Regarding performance, not all servers are guaranteed.
Up to 48 devices can be registered.
- 134 -
Sharing file
You can share the files between PC and devices connected to this TV.
To enable this function, connect this TV to your home network.
Network > Network connections
Network > Network settings
1. Display the menu with MENU.
2. Select Network > File Sharing Settings > File Sharing Server and press
OK to access.
3. Select On and press OK to set.
4. Operate your PC to share the files.
This function is not available when the TV is turned off with Mains Power
On / Off switch. You can share the files in Standby mode when DLNA
Server is set to On.
= Note =
Regarding performance, not all PCs are guaranteed.
Do not turn the TV off, pull out the mains plug or remove the device during
operation (reading, copying, etc.). Doing so may cause malfunction of the
device or damage the recorded data.
All data in the USB HDD will be erased when you format the USB HDD
with this TV for recording.
To connect the USB HDD
Recording > USB HDD setup
Picture noise may occur on the screen when playback starts during
operation (reading, copying, etc.).
For details of the devices
Media Player > Technical information
- 135 -
Photo mode
Selecting file
Select the file in the thumbnail view and press OK to start playback.
: Error display
To change the size of photos in the thumbnail view
1) Display the option menu with OPTION.
2) Select Change Size and press OK to change.
For details of supported file formats
Media Player > Technical information > Photo format
Thumbnail view
To display / hide information of the highlighted content
To display Slideshow Settings
(red)
Media Player > Photo mode > Using Slideshow
To sort
(green)
To change the content
(blue)
- 136 -
Viewing photo
Playback
To operate Single view
: To the previous photo
: To the next photo
: Stop (return to thumbnail)
OK : Slideshow
To display / hide the operation guide
To rotate 90°
(blue)
To return to thumbnail
BACK/RETURN
- 137 -
Sorting photos
To sort by folder, recorded date or recorded month
1. Display the view selection in the thumbnail view with (green).
2. Select Folder view / Sort by Date / Sort by Month and press OK to set.
Folder view:
Displays the thumbnail grouped by folder.
Files which are in the root folder are collected to the folder named
“/”.
Sort by Date / Sort by Month:
Displays the thumbnail grouped by the same date or month.
The group of the photos without recorded dates is shown as
Unknown.
To return to the thumbnail of all photos
1) Display the view selection in the thumbnail view with
(green).
2) Select All photos and press OK to set.
- 138 -
Using Slideshow
Slideshow ends when all photos within the current thumbnail are viewed.
1. Select the file from the thumbnail of photos for the first view.
2. Start Slideshow with
(red) and OK.
To display / hide the operation guide
To pause (return to Single view)
OK
To return to thumbnail
BACK/RETURN
You can change the back ground music by setting Back Ground Music
in Slideshow Settings (see below).
Slideshow Settings
Set up the settings for Photo mode.
1. Display the option menu with OPTION.
2. Select Slideshow Settings with OK.
3. Select one of the following items and press OK to access.
Screen Mode / Interval / Repeat / Back Ground Music
4. Set the item and press OK to store.
Screen Mode
(Normal / Zoom)
Selects enlarged or normal viewing.
Depending on the photo size, the photo may not be fully enlarged to fill the
screen (e.g. portrait style picture).
Interval
(Long / Normal / Short)
Selects slideshow interval.
Repeat
(On / Off)
Slideshow repeat
- 139 -
Back Ground Music
(Off / Type1 / Type2 / Type3 / Type4 / Type5 / User / Auto)
Selects the background music during Photo mode.
Type1 - 5:
Music files installed on this TV at the factory settings are played back.
Auto:
Music files stored in the current device are played back.
If there is no available music data, no sound is played back.
User:
Music files in the device registered by yourself are played back.
If no music files have been registered or the device which had
registered music files is removed, no sound is played back.
To register music
1) Select the music file and press OK to access.
Depending on the condition of the device, select folders until you
reach the desired music file.
2) Select File / Folder and press OK to set.
File:
The selected music file is registered.
Folder:
All the music files in the folder which contains the selected music file
are registered.
= Note =
Picture quality may be degraded depending on the slideshow setting.
Picture setting may not work depending on the slideshow setting.
- 140 -
Video mode
Selecting file
1. Select the title in the thumbnail view.
: Error display
: The file does not support thumbnail view.
The preview will start when the title / scene is highlighted in the
thumbnail view if it supports a preview. To turn off the preview, set
Video Preview to Off.
Media Player > Video mode > Video Setup
2. Start playback with (red).
If you have stopped the last playback halfway, a confirmation screen
may be displayed to select whether to start from where you stopped
last time or from the beginning.
For details of supported file formats
Media Player > Technical information > Video format
Thumbnail view
To display / hide information of the highlighted content
To start playback
(red)
To change the content
(blue)
- 141 -
Watching video
Playback from the selected scene in the title
Playback of the selected scene starts and continues until the end of the title.
1. Select the title and press OK to access.
2. Select the scene.
3. Start playback with
(red).
The structure of titles and scenes may vary depending on the digital video
camera used.
Playback may not continue depending on the condition.
To repeat playback
Media Player > Video mode > Video Setup
Playback
To operate playback
: Rewind
: Fast forward
: Stop
OK : Pause (displays the time seek bar) / Playback
To jump to the specified time point
1) Display the time seek bar with OK.
2) While the time seek bar is displayed
Press
/ :
Search approx. 10 seconds
Press and hold
/ :
Search rapidly
3) Jump to the specified time point with OK.
To display / hide the operation guide and information banner
To the previous title / scene
(red)
To the next title / scene
(green)
- 142 -
To change aspect
1) Display Aspect Selection with ASPECT.
2) Select the mode and press OK to set.
Aspect1:
Displays the content in original size.
Aspect2:
Displays the content enlarged without distortion.
You can also change the mode pressing ASPECT. (Press repeatedly
until you reach the desired mode.)
Aspect cannot be changed depending on the content.
To return to thumbnail
BACK/RETURN
- 143 -
Video Setup
Set up the settings for Video mode.
1. Display the option menu with OPTION.
2. Select Video Setup with OK.
3. Select one of the following items and press OK to access.
Video Preview / Multi Audio / Dual Mono Audio / Repeat / Subtitle Settings
Menu items and selectable options vary depending on the content.
4. Set the item and press OK to store.
Video Preview
(On / Off)
Sets to start the preview of the title or scene in the thumbnail view.
Images may not be displayed for an instant in the thumbnail view. Set the
preview Off to solve this.
This function is available in the thumbnail view.
Multi Audio, Dual Mono Audio
Selects for selectable sound tracks (if available).
It may take several seconds to change the sound.
This function is available during playback.
Repeat
(On / Off)
Playback repeat within the title or selected file (depending on the content)
Subtitle Settings
Sets the subtitle setting.
This function is available during playback.
Subtitle:
Display / hide subtitles (if available).
Subtitle Text:
Selects the font type to display subtitles correctly (if available).
Subtitle Text Size:
Selects the font size of subtitles.
- 144 -
Subtitle Text Colour:
Selects the colour of subtitles.
Subtitle Text Position:
Adjusts the position of subtitles on the screen.
Subtitle Text Delay:
Adjusts the delay time for the subtitles.
- 145 -
Audio output settings
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL
AUDIO or HDMI2 (ARC function) terminal.
To confirm or change the current sound status
Media Player > Video mode > Video Setup
1. Display the menu with MENU.
2. Select Sound > SPDIF Selection and press OK to access.
3. Select Auto / PCM and press OK to set.
SPDIF Selection
(Auto / PCM)
Selects the initial setting for digital audio output signal from DIGITAL AUDIO
and HDMI2 (ARC function) terminals.
SPDIF is a standard audio transfer file format.
Auto:
Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output
as Dolby Digital Bitstream. MPEG is output as PCM.
PCM:
Digital output signal is fixed to PCM.
ARC (Audio Return Channel) is a function of digital audio output using
HDMI cable.
- 146 -
Music mode
Selecting file
1. Select the folder in the thumbnail view.
2. Start playback with
(red).
For details of supported file formats
Media Player > Technical information > Music format
Thumbnail view
To display / hide information of the highlighted content
To start playback
(red)
To change the content
(blue)
- 147 -
Playing music
Playback of the selected file in the folder
1. Select the folder and press OK to access.
2. Select the file.
3. Start playback with
(red).
Playback
To operate playback
: Rewind
: Fast forward
: Stop
OK : Pause (displays the time seek bar) / Playback
To jump to the specified time point
1) Display the time seek bar with OK.
2) While the time seek bar is displayed
Press
/ :
Search approx. 10 seconds
Press and hold
/ :
Search rapidly
3) Jump to the specified time point with OK.
To display / hide the operation guide
To the previous track
(red)
To the next track
(green)
To return to thumbnail
BACK/RETURN
- 148 -
Music Setup
Set up the setting for Music mode.
This function is available in the thumbnail view.
1. Display the option menu with OPTION.
2. Select Music Setup > Repeat with OK.
3. Select Off / Folder / One and press OK to set.
Folder:
Playback repeat within the selected folder
One:
Playback repeat of the selected one file
- 149 -
Recorded TV mode
Selecting content
For exclusive USB HDD
To play back content in the USB HDD, ensure the connection and settings
are completed.
Recording > USB HDD setup
1. Content list of the selected device is displayed in Recorded TV mode.
Remaining capacity of the selected device is displayed on the top right.
(This value may not be accurate depending on the condition.)
Content list is displayed as All or Not Viewed.
All:
All the recorded TV programmes are listed.
Not Viewed:
Content not played back yet are listed.
Icons are displayed.
: Content not played back yet (Once you play back the content, this
icon will disappear.)
: Protected content cannot be deleted.
: Currently recording (You can play back this recording content.)
: Group of content
2. Select the content and press OK to start playback.
If you have stopped the last playback halfway, a confirmation screen
may be displayed to select whether to start from where you stopped
last time or from the beginning.
If the content has multiple programmes with different parental ratings,
the highest restriction is applied to the content. Once you unlock the
restriction, all the programmes in the content can be played back.
For details of supported file formats
Media Player > Technical information > Video format
- 150 -
Watching recorded TV
Playback
To operate playback
: Manual skip
Press to skip forward approx. 30 seconds.
Press and hold to skip backward approx. 15 seconds.
: Rewind
: Fast forward
: Stop
OK : Pause (displays the time seek bar) / Playback
To jump to the specified time point
1) Display the time seek bar with OK.
2) While the time seek bar is displayed
Press
/ :
Search approx. 10 seconds
Press and hold
/ :
Search rapidly
3) Jump to the specified time point with OK.
To display / hide the operation guide and information banner
To repeat between the starting point “A” and finishing point “B”
(blue)
(Set “A” and “B” in order.)
The points are reset by pressing again or by other operations.
To the previous / next chapter
(red) / (green)
A recorded content is automatically divided into chapters (approx. 5
minutes for each).
To change aspect
ASPECT
Watching > For best picture > Aspect
To display the subtitle (if available)
STTL
- 151 -
To confirm or change the current status (if available)
Watching > Basic > AV Options
To return to list
BACK/RETURN
- 152 -
Grouping content
1. Select the content to edit and press (blue) to tick in the content list.
2. Display the option menu with OPTION.
3. Select Create Group / Release Group / Exclude from Group / Change
Protect Status and press OK to set.
Create Group:
Create a group of content. Select and tick all the desired content, and
then select Create Group.
Release Group:
Select the created group to release, and then select Release Group.
(To release several groups at once, tick all the desired groups.)
Exclude from Group:
Select the group and press OK to display the grouped content. To
exclude specific content from the group, tick it and then select Exclude
from Group. (To exclude some of the content at once, tick all the
desired content.)
Change Protect Status:
Select the content to protect from deletion, and then select Change
Protect Status. Perform the same way to cancel the protection. (To
change the status of some of the content at once, tick all the desired
content.)
- 153 -
Deleting content
1. Select the content to edit and press (blue) to tick in the content list.
2. Delete the content with
(red).
3. When a confirmation screen is displayed, select Yes and press OK to set.
- 154 -
Chapter List
You can start playback from the chapter list you select.
1. Display the chapter list with
(yellow).
2. Select the chapter and press OK to start playback.
= Note =
The chapter list is not displayed while the selected content is being
recorded.
Depending on the recorded programmes, some playback operations may
not work properly.
- 155 -
Audio output settings
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL
AUDIO or HDMI2 (ARC function) terminal.
To confirm or change the current sound status
Media Player > Video mode > Video Setup
1. Display the menu with MENU.
2. Select Sound > SPDIF Selection and press OK to access.
3. Select Auto / PCM and press OK to set.
SPDIF Selection
(Auto / PCM)
Selects the initial setting for digital audio output signal from DIGITAL AUDIO
and HDMI2 (ARC function) terminals.
SPDIF is a standard audio transfer file format.
Auto:
Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output
as Dolby Digital Bitstream. MPEG is output as PCM.
PCM:
Digital output signal is fixed to PCM.
ARC (Audio Return Channel) is a function of digital audio output using
HDMI cable.
- 156 -
Technical information
Device handling caution
Data modified with a PC may not be displayed.
Do not remove the device while the TV is accessing data. Otherwise this
can damage the device or TV.
Do not touch the pins on the device.
Do not subject the device to a high pressure or impact.
Insert the device in the correct direction. Otherwise this can damage the
device or TV.
Electrical interference, static electricity, or erroneous operation may
damage the data or device.
Back up the recorded data at regular intervals to prevent data
deterioration, data damage or erratic operation of the TV. Panasonic is not
liable for any deterioration or damage of recorded data.
- 157 -
USB devices
It is recommended to connect the device to the TV’s USB port directly.
Some USB devices or USB HUB may not be used with this TV.
You cannot connect any devices using a USB card reader.
USB Flash Memory
USB Flash Memory format:
FAT16, FAT32 or exFAT
USB HDDs formatted on a PC are not guaranteed to work in Media Player.
USB HDD
The capacity of USB HDD that works with this TV is from 160 GB to 3 TB.
Connect the USB HDD to the mains socket to record and play back
properly with this TV.
Use the USB HDD formatted with this TV.
Recording > USB HDD setup > Setting for USB HDD
Regarding performance, not all USB HDDs are guaranteed.
- 158 -
Photo format
Supported Photo formats
JPEG (.jpg, .jpeg)
Sub-sampling:
4:4:4, 4:2:2, 4:2:0
Image resolution (pixel):
8 × 8 to 30 719 × 17 279
DCF and EXIF standards
Progressive JPEG is not supported.
= Note =
Some files may not be played back even if they fulfil these conditions.
Do not use multi-byte characters or other special codes for file names.
Connected devices may become unusable with this TV if the file or folder
names are changed.
- 159 -
Video format
Supported Video formats
AVI (.avi)
Video codec:
H.264, MPEG1, MPEG2, MPEG4, VC-1, WMV9
Audio codec:
AAC, ADPCM, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3,
WMA, WMA Pro
MP4 (.f4v, .m4v, .mp4)
Video codec:
H.264, H.265 (HEVC), MPEG1, MPEG2, MPEG4
Audio codec:
AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, MP3
This TV supports this container recorded with Panasonic products. For
details, read the manual of the products.
MKV (.mkv)
Video codec:
H.264, H.265 (HEVC), MPEG1, MPEG2, MPEG4
Audio codec:
AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, MP3, Vorbis
ASF (.asf, .wmv)
Video codec:
MPEG4, VC-1, WMV9
Audio codec:
AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3, WMA,
WMA Pro
Copy-protected files cannot be played back.
- 160 -
FLV (.flv)
Video codec:
H.264
Audio codec:
AAC, MP3
3GPP (.3gp, .3g2)
Video codec:
H.264, MPEG4
Audio codec:
AAC, HE-AAC
PS (.mod, .mpg, .mpeg, .vob, .vro)
Video codec:
H.264, MPEG1, MPEG2, VC-1
Audio codec:
AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3
TS (.mts, .m2ts, .tp, .trp, .ts, .tts)
Video codec:
H.264, H.265 (HEVC), MPEG1, MPEG2, VC-1
Audio codec:
AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, MP3
WebM (.webm)
Video codec:
VP9
Audio codec:
Vorbis
- 161 -
Supported Subtitles formats
MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt)
The video file and subtitles text file are inside the same folder, and the file
names are the same except for the file extensions.
If there are more than one subtitles text files inside the same folder, they
are displayed in the following order of priority: “.srt”, “.sub”, “.txt”.
= Note =
Some files may not be played back even if they fulfil these conditions.
Some subtitles or chapter functions may not be available.
Do not use multi-byte characters or other special codes for file names.
Connected devices may become unusable with this TV if the file or folder
names are changed.
Supported formats are different in Media Player and media server.
- 162 -
Music format
Supported Music formats
MP3 (.mp3)
AAC / Apple Lossless (.m4a)
Copy-protected files cannot be played back.
FLAC (.flac)
WMA / WMA Pro (.wma)
Copy-protected files cannot be played back.
LPCM (.wav)
= Note =
Some files may not be played back even if they fulfil these conditions.
Do not use multi-byte characters or other special codes for file names.
Connected devices may become unusable with this TV if the file or folder
names are changed.
- 163 -
Network
Internet content
Information
You can access some specific websites supported by Panasonic, and enjoy
internet content such as videos, games, communication tools, etc. from Apps.
(Example)
A broadband network environment is required to use this function. Ensure
the network connections and network settings are completed.
Network > Network connections
Network > Network settings
- 164 -
Selecting internet content
1. Display Apps with APPS.
For details of Apps
Home Screen > Apps
Depending on the usage conditions, it may take a while to read all the
data.
2. Select the desired item and press OK to access.
(Example)
To exit Apps
EXIT
You can connect a keyboard for character input in the applications. You
can also use the keyboard for TV operation.
Functions > Keyboard
- 165 -
Note
If you cannot access the internet content, check the network connections
and settings.
Network > Network connections
Network > Network settings
Design and specifications are subject to change without notice.
Not all the features of the websites are available.
Be sure to update the software when a software update notice is displayed
on the TV screen. If the software is not updated, you may not be able to
use Apps. You can update the software later manually.
Network > Network settings > Software Update
The services through Apps are operated by their respective service
providers and such service may be discontinued either temporarily or
permanently without notice. Therefore, Panasonic will make no warranty
for the content or the continuity of the services.
Content may not be available depending on the country you select.
Content may be presented in specific languages.
Depending on the connection environment, the internet connection may be
slow or may not be successful.
- 166 -
DLNA
In-House streaming
This TV is a DLNA Certified™ product.
DLNA
®
(Digital Living Network Alliance) is a standard that makes DLNA
Certified digital electronics easier and more convenient to use on a home
network. To learn more, visit www.dlna.org.
To enable this function, connect this TV to your home network.
Network > Network connections
Network > Network settings
Playback of sharing content stored in the media server
Store photo, video or music content into the DLNA Certified media server (for
example, PC, DIGA Recorder, etc.) connected to your home network. And
then you can enjoy the content on this TV.
(Example)
For details of watching and operating content on this TV
Network > DLNA > Using DLNA
For details of supported file formats
Network > Technical information
To use a DLNA compatible DIGA Recorder as a media server
By connecting a DLNA compatible DIGA Recorder to your home network, you
can control it as one of the media servers.
Please read the manual of your DIGA Recorder to check if the recorder is
compatible with DLNA.
- 167 -
Playback of sharing content on this TV with the DMC (Digital
Media Controller) network equipment
You can enjoy content stored in the media server by controlling with the DMC
network equipment (smartphone, PC, etc.) connected to your home network.
To use this function with your smartphone or PC, set TV Remote App
Settings of this TV.
Network > Network settings > TV Remote App Settings
And you need to install the application for controlling VIERA on your
smartphone.
Support > FAQs > Detailed information
For the operations, refer to the support information of the application.
Sharing the content of this TV with another piece of network
equipment
You can enjoy the content of this TV with another network equipment
connected to your home network.
Available content:
Photo, video or music content of this TV
Current digital TV programme
TV programmes recorded on USB HDDs with this TV
Available network equipment:
DLNA Certified VIERA
Smartphone, etc.
To use this function with your smartphone, you need to install the
application for controlling VIERA on your smartphone.
Support > FAQs > Detailed information
For the operations, refer to the support information of the application.
To use this function with another DLNA Certified VIERA, set Network Link
Settings of this TV.
Network > Network settings > Network Link Settings
Sharing the current programme may not be available when selecting radio
channels, encrypted (copy-protected) programmes or when the broadcast
prohibits the output of video and audio.
Display the TV full-screen for sharing the TV programme with another
piece of network equipment.
Only 1 piece of other equipment can share the content of this TV.
- 168 -
= Note =
This function is not available when the TV is turned off with Mains Power
On / Off switch.
This function may not be available in the following condition of this TV:
While the recording is in progress
- 169 -
Using DLNA
To use DLNA
®
features, ensure the preparations of the media server, network
connections and network settings are completed.
Network > DLNA > In-House streaming
Network > Network connections
Network > Network settings
1. Display Home Screen with HOME.
2. Select Devices and press OK to access.
3. Select the media server and press OK to access.
To display / hide information of the highlighted media server
1) Display the option menu with OPTION.
2) Select Show Info. and press OK to access.
4. Select the file and press OK to access.
(Example)
Depending on the condition of media server, you may need to select
the folder before selecting the file.
To display / hide information of the highlighted file
= Note =
Non-playable files are also listed but cannot be selected.
You can use the following buttons during playback. Confirm the remote
control code is “73”.
Watching > External equipment > Operating with TV’s remote control
- 170 -
Network connections
Internet connection
A broadband network environment is required to use internet services.
If you do not have any broadband network services, please consult your
retailer for assistance.
Dial-up internet connections cannot be used.
Required speed (effective): at least 1.5 Mbps for SD (Standard Definition)
and 6 Mbps for HD (High Definition) picture quality, respectively. If the
transfer speed is not enough, content may not be played back properly.
Wireless connection
Built-in wireless LAN (Rear of the TV)
Access point
Internet environment
Wired connection
ETHERNET terminal
LAN cable (Shielded)
Use Shielded Twist Pair (STP) LAN cable.
Internet environment
- 171 -
DLNA connection
To use DLNA features, you need a home network environment and you can
operate the features without a broadband network environment.
A broadband network environment is required to use internet services.
Network > Network connections > Internet connection
Wireless connection (For DLNA and internet service)
Built-in wireless LAN (Rear of the TV)
Access point
Hub / Router
Internet environment
Smartphone, etc.
DLNA Certified media server (PC, etc.)
- 172 -
Wired connection (For DLNA and internet service)
ETHERNET terminal
LAN cable (Shielded)
Use Shielded Twist Pair (STP) LAN cable.
Hub / Router
Internet environment
DLNA Certified media server (PC, etc.)
Wireless connection (For DLNA)
TV
To use the TV as a wireless access point
Network > Network settings > Custom - Wireless Access Point
DLNA Certified media server (PC, etc.)
Smartphone, etc.
- 173 -
Note
Ensure to use a LAN straight cable.
Set up and connect equipment required for the network environment. You
cannot make such settings on this TV. Read the manual of the equipment.
If your modem has no broadband router functions, use a broadband router.
If your modem has broadband router functions but there are no vacant
ports, use a hub.
Ensure that the broadband routers and hubs are compatible with
10BASE-T / 100BASE-TX.
If you use the equipment compatible only with 100BASE-TX, category 5 or
later LAN cables are required.
Contact your Internet Service Provider (ISP) or telecommunications
company for further assistance regarding the network equipment.
Confirm the terms and conditions of the contracts with your Internet
Service Provider (ISP) or telecommunications company. Depending on the
contracts, additional fees may be charged or multiple connections to the
internet may be impossible.
Turn the TV off with Mains Power On / Off switch, and then on again when
changing or making the network connection again.
Depending on the network condition, the content may not be played back
properly.
For details of DVB-via-IP connections
Functions > DVB-via-IP > DVB-via-IP client connection
- 174 -
Network settings
Network Connection
Ensure the connections are completed before starting network setup.
Network > Network connections
Quick setup - Wireless
1. Display the menu with MENU.
2. Select Network > Network Connection and press OK to access.
Confirm the encryption key, settings and position of your access point
before starting setup. For details, read the manual of the access point.
3. Select Quick setup and press OK to access.
When the LAN cable is connected, wired setup will be done
automatically.
4. Select your desired access point and press OK to access.
Available Wireless Networks are displayed automatically.
: Encrypted access point
For WPS(Push button)
1) Select Easy setup with Push button and press OK to access.
2) Press the WPS button on the access point until the light flashes.
3) Connect the TV with the access point with OK.
WPS: Wi-Fi Protected Setup™
If the connection fails, check the settings and positions of your
access point. And then, follow the on-screen instructions.
It is recommended to select the encrypted access point.
5. Enter the encryption key of the access point and press OK to set.
You can set characters using Numeric buttons.
Press BACK/RETURN to store.
6. Automatically setup is done and Network Status is displayed.
Network > Network settings > Network Status
7. Select Exit and press OK to set.
To set manually
Network > Network settings > Custom - Wireless
- 175 -
Quick setup - Wired
1. Display the menu with MENU.
2. Select Network > Network Connection and press OK to access.
3. Select Quick setup and press OK to access.
4. Automatically setup is done and Network Status is displayed.
Network > Network settings > Network Status
5. Select Exit and press OK to set.
To set manually
Network > Network settings > Custom - Wired
= Note =
To deactivate wireless, set Easy Mirroring to Off and confirm the network
connection type is set to Wired.
- 176 -
Custom - Wireless
Ensure the connections are completed before starting network setup.
Network > Network connections
1. Display the menu with MENU.
2. Select Network > Network Connection > Custom > Wireless and press OK
to access.
Confirm the encryption key, settings and position of your access point
before starting setup. For details, read the manual of the access point.
3. Select your desired access point and press OK to access.
Available Wireless Networks are displayed automatically.
: Encrypted access point
For WPS(Push button)
1) Press
(red).
2) Press the WPS button on the access point until the light flashes.
3) Connect the TV with the access point with OK.
WPS: Wi-Fi Protected Setup™
If the connection fails, check the settings and positions of your
access point. And then, follow the on-screen instructions.
For WPS(PIN)
1) Press
(green).
2) Enter the PIN code to the access point.
3) Connect the TV with the access point with OK.
For Manual
1) Press
(yellow).
2) You can set up SSID, security settings and encryption key manually.
3) Follow the on-screen instructions and set manually.
To search access points again
(blue)
To display / hide information of the highlighted access point
It is recommended to select the encrypted access point.
- 177 -
4. Enter the encryption key of the access point and press OK to set.
You can set characters using Numeric buttons.
Press BACK/RETURN to store.
5. IP/DNS Settings is displayed.
Acquire IP Address / Acquire DNS Address
Auto is recommended.
Available settings are displayed automatically.
To set manually, select and set IP Address / Subnet Mask / Default
Gateway / DNS Address.
Proxy Settings
It is not required for normal household use.
Some internet services may not be available depending on the proxy
setting.
Proxy:
This is the address of the relay server which is connected between the
browser and the target server to send data to the browser.
1) Select Proxy and press OK to access.
2) Enter the address with Cursor buttons or Numeric buttons, and
press OK to set.
3) Press BACK/RETURN to store.
Proxy Port:
This number is also specified by the provider with the proxy address.
1) Select Proxy Port.
2) Enter the number with Numeric buttons.
3) Press BACK/RETURN to store.
- 178 -
6. Select Network Status and press OK to access.
Network > Network settings > Network Status
7. Select Exit and press OK to set.
- 179 -
Custom - Wired
Ensure the connections are completed before starting network setup.
Network > Network connections
1. Display the menu with MENU.
2. Select Network > Network Connection > Custom > Wired and press OK to
access.
3. IP/DNS Settings is displayed.
Acquire IP Address / Acquire DNS Address
Auto is recommended.
Available settings are displayed automatically.
To set manually, select and set IP Address / Subnet Mask / Default
Gateway / DNS Address.
Proxy Settings
It is not required for normal household use.
Some internet services may not be available depending on the proxy
setting.
Proxy:
This is the address of the relay server which is connected between the
browser and the target server to send data to the browser.
1) Select Proxy and press OK to access.
2) Enter the address with Cursor buttons or Numeric buttons, and
press OK to set.
3) Press BACK/RETURN to store.
Proxy Port:
This number is also specified by the provider with the proxy address.
1) Select Proxy Port.
2) Enter the number with Numeric buttons.
3) Press BACK/RETURN to store.
- 180 -
4. Select Network Status and press OK to access.
Network > Network settings > Network Status
5. Select Exit and press OK to set.
= Note =
To deactivate wireless, set Easy Mirroring to Off and confirm the network
connection type is set to Wired.
- 181 -
Custom - Wireless Access Point
You can use the TV as a wireless access point and connect the network
equipment without an access point.
Confirm the PIN code, network settings of the equipment before starting
setup. For details, read the manual of the equipment.
1. Display the menu with MENU.
2. Select Network > Network Connection > Custom > Wireless Access Point
and press OK to access.
3. Select Connect to device in WPS and press OK to access.
To set manually, select Change settings (see below).
4. Select and set WPS(Push button) / WPS(PIN) and press OK to access.
WPS(Push button):
Set up the equipment for WPS(Push button). For details, read the
manual of the equipment.
WPS(PIN):
Enter the PIN code of the equipment.
If the connection fails, check the settings and positions of the
equipment. And then, follow the on-screen instructions.
Change settings
You can set up Network Name(SSID), Encryption key, Wireless type and
Channel setting method manually.
Follow the on-screen instructions and set manually.
Set Reset settings to reset the items for Change settings.
= Note =
You cannot connect the internet service while the TV is set to Wireless
Access Point.
You can connect up to 7 devices. But the transfer rate varies according to
communication environment or the numbers of connected equipment.
To confirm the current network settings
Network > Network settings > Network Status
Ensure the equipment to connect supports WPS for this setup.
WPS: Wi-Fi Protected Setup™
- 182 -
Network Status
Displays and checks the network status (MAC Address, current network
settings, etc.).
1. Display the menu with MENU.
2. Select Network > Network Status and press OK to access.
3. Automatically testing is done and Network Status is displayed.
Try Again:
Performs automatic testing of the network connection for the TV and
displays the current status again.
Status Details:
Displays the detailed network status (SSID, security settings, etc.).
For information about the network connection, select Help.
- 183 -
my Home Cloud Settings
Displays the terms of service.
1. Display the menu with MENU.
2. Select Network > my Home Cloud Settings > Notices and press OK to
access.
3. Follow the on-screen instructions.
- 184 -
VIERA Name
Sets your favourite name for this TV.
1. Display the menu with MENU.
2. Select Network > VIERA Name and press OK to access.
3. Enter characters and press OK to set.
This name is used as the name of this TV on the screen of the other
network equipment.
When you use two or more TVs in your network environment, set the
names of the TVs for each.
- 185 -
TV Remote App Settings
Sets to control the TV with the equipment (smartphone, etc.) connected to
your network.
1. Display the menu with MENU.
2. Select Network > TV Remote App Settings and press OK to access.
3. Select one of the following items and press OK to access.
TV Remote / Powered On by Apps / Networked Standby / Home
Streaming / Device to upload contents
4. Set the item and press OK to store.
TV Remote
(On / Off)
Enables controlling the TV from the network equipment (smartphone, etc.).
Powered On by Apps
(On / Off)
Enables turning the TV on from the network equipment (smartphone, etc.).
Depending on the network condition, you may have to turn the TV on with
Standby On / Off switch of the TV’s remote control.
Changing the default configuration may result in higher energy
consumption of the product.
LED turns to orange in Standby mode when Powered On by Apps is set to
On.
Networked Standby
(On / Off)
Enables turning the TV on via the LAN cable or wireless LAN using a wake-up
message sent from the network equipment in the home network.
Changing the default configuration may result in higher energy
consumption of the product.
- 186 -
Home Streaming
(Always / Only when powered on)
Enables sharing the TV programme and content of this TV with the network
equipment (smartphone, etc.) in the home network.
Changing the default configuration may result in higher energy
consumption of the product.
LED turns to orange in Standby mode when Home Streaming is set to
Always.
Device to upload contents
Selects device to upload content from the network equipment (smartphone,
etc.).
= Note =
This function is not available when the TV is turned off with Mains Power
On / Off switch.
You need to install the application for controlling VIERA on your
smartphone.
Support > FAQs > Detailed information
For the operations, refer to the support information of the application.
Depending on the network condition, this function may not be available.
Depending on the area, this function may not be available. For details,
consult your local Panasonic dealer.
- 187 -
Network Link Settings
Sets to control the TV with devices connected to the network.
1. Display the menu with MENU.
2. Select Network > Network Link Settings and press OK to access.
3. Select one of the following items and press OK to access.
DLNA Server / Registration Type / Remote Device List
4. Set the item and press OK to store.
DLNA Server
(On / Off)
Enables sharing the TV programme and content of this TV with the network
equipment (DLNA Certified VIERA, etc.).
To use this function with another VIERA, select the name of this TV from
the DLNA server list of another VIERA, and then select the content to
share. Also read the manual of another VIERA.
To use this function with your smartphone, you need to install the
application for controlling VIERA on your smartphone.
Support > FAQs > Detailed information
For the operations, refer to the support information of the application.
Changing the default configuration may result in higher energy
consumption of the product.
LED turns to orange in Standby mode when DLNA Server is set to On.
Registration Type
(Auto / Manual)
Selects the type to restrict the access to this TV for each piece of equipment
on the home network.
Auto:
All available equipment on the home network is accessible (maximum
16 pieces of equipment).
Manual:
Sets the restrictions for each piece of equipment in Remote Device List.
Remote Device List
Lists the equipment accessible to this TV on the home network.
- 188 -
= Note =
Depending on the area, this function may not be available. For details,
consult your local Panasonic dealer.
- 189 -
TV Anywhere Settings
Settings for watching TV or editing timer programming with the network
equipment (smartphone, etc.) from outside the home network.
Functions > TV Anywhere > TV Anywhere Settings
- 190 -
File Sharing Settings
File Sharing Server
(On / Off)
Sets to share the files between PC and devices connected to this TV.
Media Player > Using Media Player > Sharing file
Network Device List
Lists the accessible network devices to play back the content in Media Player.
Media Player > Using Media Player > Network device
- 191 -
Mirroring Settings
Settings for the mirroring function
Functions > Mirroring > Mirroring Settings
- 192 -
Do Not Track Setting
Sets to notify websites and some applications about tracking your browsing
activities.
1. Display the menu with MENU.
2. Select Network > Do Not Track Setting and press OK to access.
3. Select Tracking Mode / About Do Not Track and press OK to access.
4. Set the item and press OK to store.
Tracking Mode
(Mode1 / Mode2 / Mode3)
Mode1:
Notifies websites that you want to be tracked.
Mode2:
Notifies websites that you do not want to be tracked.
Mode3:
Sends no configuration information about tracking.
About Do Not Track
Displays the information about tracking.
A broadband network environment is required to be able to display the
detailed information.
- 193 -
Software Update
Accesses the specific website to update the TV’s software if any updates are
available.
1. Display the menu with MENU.
2. Select Network > Software Update and press OK to access.
3. Follow the on-screen instructions.
A broadband network environment is required to use this function.
- 194 -
New Software Message
Selects whether to give a notification message when new software is found
via network or not.
1. Display the menu with MENU.
2. Select Network > New Software Message and press OK to access.
3. Select On / Off and press OK to set.
- 195 -
Photos
Selecting file
Ensure the preparations of the media server, network connections and
network settings are completed.
Network > DLNA > In-House streaming
Network > Network connections
Network > Network settings
1. Display Home Screen with HOME.
2. Select Devices and press OK to access.
3. Select the media server and press OK to access.
To display / hide information of the highlighted media server
1) Display the option menu with OPTION.
2) Select Show Info. and press OK to access.
4. Select the file and press OK to access.
Depending on the condition of media server, you may need to select
the folder before selecting the file.
To display / hide information of the highlighted file
= Note =
Non-playable files are also listed but cannot be selected.
- 196 -
Viewing photo
Playback
To operate Single view
: To the previous photo
: To the next photo
: Stop (return to list)
OK : Slideshow
To display / hide the operation guide
To rotate 90°
(blue)
To return to list
BACK/RETURN
- 197 -
Using Slideshow
Slideshow ends when all photos within the list are viewed.
1. Select the file from the thumbnail of photos for the first view.
2. Start Slideshow with
(red) and OK.
To display / hide the operation guide
To pause (return to Single view)
OK
To return to list
BACK/RETURN
Slideshow Settings
Set up the settings for photo file operations on this TV.
1. Display the option menu with OPTION.
2. Select Slideshow Settings and press OK to access.
3. Select one of the following items and press OK to access.
Interval / Repeat / Back Ground Music
4. Set the item and press OK to store.
Interval
(Long / Normal / Short)
Selects slideshow interval.
Repeat
(On / Off)
Slideshow repeat
Back Ground Music
(Off / Type1 / Type2 / Type3 / Type4 / Type5)
Selects the background music during Photo mode.
- 198 -
Videos
Selecting file
Ensure the preparations of the media server, network connections and
network settings are completed.
Network > DLNA > In-House streaming
Network > Network connections
Network > Network settings
1. Display Home Screen with HOME.
2. Select Devices and press OK to access.
3. Select the media server and press OK to access.
To display / hide information of the highlighted media server
1) Display the option menu with OPTION.
2) Select Show Info. and press OK to access.
4. Select the file and press OK to access.
Depending on the condition of media server, you may need to select
the folder before selecting the file.
To display / hide information of the highlighted file
= Note =
Non-playable files are also listed but cannot be selected.
- 199 -
Watching video
Playback
If you have stopped the last playback halfway, a confirmation screen may be
displayed to select whether to start from where you stopped last time or from
the beginning.
To operate playback
: Manual skip (if available)
Press to skip forward approx. 30 seconds.
: Rewind
: Fast forward
: Stop
OK : Pause (displays the time seek bar / slow playback) / Playback
To jump to the specified time point
1) Display the time seek bar with OK.
2) While the time seek bar is displayed
Press
/ :
Search approx. 10 seconds
Press and hold
/ :
Search rapidly
3) Jump to the specified time point with OK.
To play back slowly
1) Press and hold OK for 5 seconds.
Press
/ :
Search slowly
2) Return to the normal playback with OK.
To display / hide the operation guide and information banner
To the previous content
(red)
To the next content
(green)
- 200 -
To change aspect
1) Display Aspect Selection with ASPECT.
2) Select the mode and press OK to set.
Aspect1:
Displays the content in original size.
Aspect2:
Displays the content enlarged without distortion.
You can also change the mode pressing ASPECT. (Press repeatedly
until you reach the desired mode.)
Aspect cannot be changed depending on the content.
To return to list
BACK/RETURN
- 201 -
Video Setup
Set up the settings for video file operations on this TV.
1. Display the option menu with OPTION.
2. Select Video Setup and press OK to access.
3. Select one of the following items and press OK to access.
Video Preview / Multi Audio / Dual Audio / Dual Mono Audio / Repeat /
Subtitle Settings
Menu items and selectable options vary depending on the content.
4. Set the item and press OK to store.
Video Preview
(On / Off)
Sets to start the preview of the title or scene in the thumbnail view.
Images may not be displayed for an instant in the thumbnail view. Set the
preview Off to solve this.
Multi Audio, Dual Audio, Dual Mono Audio
Selects for selectable sound tracks (if available).
It may take several seconds to change the sound.
This function is available during playback.
Repeat
(On / Off)
Playback repeat within the selected file
Subtitle Settings
Sets the subtitle setting.
This function is available during playback.
Subtitle:
Display / hide subtitles (if available).
Subtitle Text:
Selects the font type to display subtitles correctly (if available).
Subtitle Text Size:
Selects the font size of subtitles.
- 202 -
Subtitle Text Colour:
Selects the colour of subtitles.
Subtitle Text Position:
Adjusts the position of subtitles on the screen.
Subtitle Text Delay:
Adjusts the delay time for the subtitles.
- 203 -
Audio output settings
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL
AUDIO or HDMI2 (ARC function) terminal.
To confirm or change the current sound status
Network > Videos > Video Setup
1. Display the menu with MENU.
2. Select Sound > SPDIF Selection and press OK to access.
3. Select Auto / PCM and press OK to set.
SPDIF Selection
(Auto / PCM)
Selects the initial setting for digital audio output signal from DIGITAL AUDIO
and HDMI2 (ARC function) terminals.
SPDIF is a standard audio transfer file format.
Auto:
Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output
as Dolby Digital Bitstream. MPEG is output as PCM.
PCM:
Digital output signal is fixed to PCM.
ARC (Audio Return Channel) is a function of digital audio output using
HDMI cable.
= Note =
During the operation, audio signal is output from DIGITAL AUDIO and
HDMI2 (ARC function) terminals. But no video signals are output. To use
HDMI2 with ARC function, connect an amplifier that has ARC function and
set to use theatre speakers.
Functions > VIERA Link “HDAVI Control™”
- 204 -
Music
Selecting file
Ensure the preparations of the media server, network connections and
network settings are completed.
Network > DLNA > In-House streaming
Network > Network connections
Network > Network settings
1. Display Home Screen with HOME.
2. Select Devices and press OK to access.
3. Select the media server and press OK to access.
To display / hide information of the highlighted media server
1) Display the option menu with OPTION.
2) Select Show Info. and press OK to access.
4. Select the file and press OK to access.
Depending on the condition of media server, you may need to select
the folder before selecting the file.
To display / hide information of the highlighted file
= Note =
Non-playable files are also listed but cannot be selected.
- 205 -
Playing music
Playback
To operate playback
: Rewind
: Fast forward
: Stop
OK : Pause (displays the time seek bar) / Playback
To jump to the specified time point
1) Display the time seek bar with OK.
2) While the time seek bar is displayed
Press
/ :
Search approx. 10 seconds
Press and hold
/ :
Search rapidly
3) Jump to the specified time point with OK.
To display / hide the operation guide
To the previous track
(red)
To the next track
(green)
To return to list
BACK/RETURN
- 206 -
Music Setup
Set up the settings for music file operations on this TV.
1. Display the option menu with OPTION.
2. Select Music Setup > Repeat with OK.
3. Select Off / Folder / One and press OK to set.
Folder:
Playback repeat within the selected folder
One:
Playback repeat of the selected one file
- 207 -
DIGA Recorder
Controlling DIGA Recorder
Ensure the preparations of the media server, network connections and
network settings are completed.
Network > DLNA > In-House streaming
Network > Network connections
Network > Network settings
1. Display Home Screen with HOME.
2. Select Devices and press OK to access.
3. Select DIGA and press OK to access.
4. The screen of the DIGA Recorder is displayed. You can control the
functions of the DIGA Recorder with this TV’s remote control according to
the operation guide.
(Example)
For details, read the manual of the DIGA Recorder.
- 208 -
Technical information
Photo format
Supported Photo formats
JPEG (.jpg, .jpeg)
Sub-sampling:
4:4:4, 4:2:2, 4:2:0
Image resolution (pixel):
8 × 8 to 30 719 × 17 279
DCF and EXIF standards
Progressive JPEG is not supported.
= Note =
Some files may not be played back even if they fulfil these conditions.
Do not use multi-byte characters or other special codes for file names.
Connected devices may become unusable with this TV if the file or folder
names are changed.
- 209 -
Video format
Supported Video formats
AVI (.avi)
Video codec:
H.264, MPEG1, MPEG2, MPEG4, VC-1, WMV9
Audio codec:
AAC, ADPCM, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3,
WMA, WMA Pro
MP4 (.f4v, .m4v, .mp4)
Video codec:
H.264, H.265 (HEVC), MPEG1, MPEG2, MPEG4
Audio codec:
AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, MP3
This TV supports this container recorded with Panasonic products. For
details, read the manual of the products.
MKV (.mkv)
Video codec:
H.264, H.265 (HEVC), MPEG1, MPEG2, MPEG4
Audio codec:
AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, MP3, Vorbis
ASF (.asf, .wmv)
Video codec:
MPEG4, VC-1, WMV9
Audio codec:
AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3, WMA,
WMA Pro
Copy-protected files cannot be played back.
- 210 -
FLV (.flv)
Video codec:
H.264
Audio codec:
AAC, MP3
3GPP (.3gp, .3g2)
Video codec:
H.264, MPEG4
Audio codec:
AAC, HE-AAC
PS (.mod, .mpg, .mpeg, .vob, .vro)
Video codec:
MPEG1, MPEG2
Audio codec:
Dolby Digital, LPCM
TS (.mts, .m2ts, .tp, .trp, .ts, .tts)
Video codec:
H.264, H.265 (HEVC), MPEG1, MPEG2
Audio codec:
AAC, Dolby Digital, Dolby Digital Plus, HE-AAC
WebM (.webm)
Video codec:
VP9
Audio codec:
Vorbis
- 211 -
Supported Subtitles formats
MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt)
The video file and subtitles text file are inside the same folder, and the file
names are the same except for the file extensions.
If there are more than one subtitles text files inside the same folder, they
are displayed in the following order of priority: “.srt”, “.sub”, “.txt”.
= Note =
Some files may not be played back even if they fulfil these conditions.
Some subtitles or chapter functions may not be available.
Do not use multi-byte characters or other special codes for file names.
Connected devices may become unusable with this TV if the file or folder
names are changed.
Supported formats are different in Media Player and media server.
- 212 -
Music format
Supported Music formats
MP3 (.mp3)
AAC / Apple Lossless (.m4a)
Copy-protected files cannot be played back.
FLAC (.flac)
WMA / WMA Pro (.wma)
Copy-protected files cannot be played back.
LPCM (.wav)
= Note =
Some files may not be played back even if they fulfil these conditions.
Do not use multi-byte characters or other special codes for file names.
Connected devices may become unusable with this TV if the file or folder
names are changed.
- 213 -
Functions
Info Frame
Information
Info Frame is a convenient feature to provide you relevant information of the
programme being watched, recommendations, etc. It is displayed on the edge
of screen when you need it.
(Example)
A broadband network environment is required to fully use this function.
= Note =
Design and specifications are subject to change without notice.
- 214 -
How to use
You can check useful information using Info Frame while watching TV.
1. Press and hold HOME.
Info Frame is displayed on the edge of screen.
(Example)
Current programme information, etc.
Relevant information (weather forecast, etc.)
Notification message
Recommended content (TV programme, internet content, etc.)
2. Select one side of Info Frame with Cursor buttons or
(coloured buttons) while Info Frame is displayed.
3. Follow the on-screen instructions.
To exit Info Frame
BACK/RETURN
= Note =
Info Frame is displayed for several seconds each time the TV is turned on.
Functions > Info Frame > Settings
- 215 -
Settings
You can set items for Info Frame.
1. Display the menu with MENU.
2. Select Setup > Display Settings > Info Frame at Power on and press OK to
access.
3. Set the item and press OK to store.
Info Frame at Power on
(On / Off)
Displays Info Frame when the TV is turned on.
- 216 -
Voice Control
Information
Voice Control function allows you to operate the TV (e.g. selecting a channel),
search the content from various features, etc. by your speech with your
smartphone.
A broadband network environment is required to fully use this function.
Ensure the network connections and network settings are completed.
Network > Network connections
Network > Network settings
To use this function with your smartphone, you need to install the
application for controlling VIERA on your smartphone.
Support > FAQs > Detailed information
For the operations, refer to the support information of the application.
- 217 -
How to use
1. Press on the screen of your smartphone to display the operation guide.
When a confirmation screen is displayed, read carefully and start Voice
Control function.
(Example)
2. Say a key word (e.g. my Home Screen) to the microphone while the
operation guide is displayed.
(Example)
The operation guide turns to blue during processing.
The operation guide automatically disappears after a certain period of
time. Press again to start the Voice Control function.
To display voice command list
To exit Voice Control function
- 218 -
Settings
You can set items for Voice Control function.
1. Display the menu with MENU.
2. Select Setup > Voice Control Settings and press OK to access.
3. Select one of the following items and press OK to access.
Language / Speech Detection Level / Terms of Service / Instructions for
Voice Control
4. Set the item and press OK to store.
Language
Select the language for Voice Control function.
All languages may not be available. When the selected language is not
supported, Language is set to English automatically.
Speech Detection Level
(High / Standard)
Adjusts the sensitivity to recognise your speech.
Terms of Service
Displays the terms of service.
Instructions for Voice Control
Displays details of Voice Control function in eHELP.
- 219 -
Note
When you start Voice Control function, sound level of the TV becomes low.
Voice Control function may not work properly in the following conditions:
Not pronouncing words clearly and correctly
Speaking too loudly or too quietly.
Surrounded by loud background noise.
Phrases other than Voice Command may not be recognised.
Voice Control function may not work properly depending on the
microphone of the smartphone.
Design and specifications are subject to change without notice.
A broadband network environment is required to fully use this function,
because this function accesses the speech recognition server with the
internet connection. Even if you have the internet environment, this
function may not be available depending on the proxy setting. Please
connect the internet without proxy settings. (Proxy settings are not
required for normal household use. For details of the internet environment,
consult your Internet Service Provider (ISP) or telecommunications
company.)
- 220 -
TV Anywhere
How to use
You can watch TV and set timer event with the network equipment
(smartphone, etc.) from outside the home network.
Smartphone, etc.
TV
Ensure the network connections and network settings are completed.
Network > Network connections
Network > Network settings
1. Set TV Anywhere to On.
Functions > TV Anywhere > TV Anywhere Settings
2. Connect the device (smartphone, etc.) to the home network and access to
the TV.
You need to install the application for controlling VIERA on your
smartphone.
Support > FAQs > Detailed information
For the operations, refer to the support information of the application.
= Note =
This function is not available when the TV is turned off with Mains Power
On / Off switch.
Due to network conditions or certain broadcaster restrictions, this function
may not be available.
- 221 -
TV Anywhere Settings
1. Display the menu with MENU.
2. Select Network > TV Anywhere Settings and press OK to access.
3. Select one of the following items and press OK to access.
TV Anywhere / Powered on by Swipe & Share / Device ID / Device
Password
4. Follow the on-screen instructions.
TV Anywhere
(On / Off)
Enables watching TV and setting timer event with the network equipment
(smartphone, etc.) from outside the home network.
Changing the default configuration may result in higher energy
consumption of the product.
LED turns to orange in Standby mode when TV Anywhere is set to On.
Powered on by Swipe & Share
(On / Off)
Enables turning on the TV automatically when the Swipe & Share function is
activated from the other devices (smartphone, etc.).
Set TV Anywhere to On to use this function.
Use the Swipe & Share function to turn on the TV only when you can see
the status of the TV.
Device ID
Displays the device ID of this TV.
Device Password
Displays the device password of this TV.
- 222 -
Mirroring
How to use
You can watch and display images of other devices (smartphone, etc.) on the
TV screen using a mirroring function.
Smartphone, etc.
TV
1. Display Home Screen with HOME.
2. Select Devices and press OK to access.
3. Select Mirroring and press OK.
4. Follow the on-screen instructions.
Pairing information of the device (smartphone, etc.) is registered once you
use this function.
Easy Mirroring
You can also start the mirroring function from the other devices (smartphone,
etc.) when Easy Mirroring is set to On.
Functions > Mirroring > Mirroring Settings
You cannot use Easy Mirroring function while the TV is set to Wireless
Access Point.
Network > Network settings > Network Status
= Note =
This function is available with the other devices (smartphone, etc.)
supporting the mirroring function. For details, refer to the operating
instructions of the devices.
- 223 -
Mirroring Settings
You can set items for the mirroring function.
1. Display the menu with MENU.
2. Select Network > Mirroring Settings and press OK.
3. Select one of the following items and press OK to access.
Easy Mirroring / Powered On by Easy Mirroring / Delete All Pairings
4. Set the item and press OK to store.
Easy Mirroring
(On / Off)
Enables starting the mirroring function from the other devices (smartphone,
etc.) without operating the TV.
To deactivate wireless, set Easy Mirroring to Off and confirm the network
connection type is set to Wired.
Network > Network settings > Network Status
Not valid when the TV is set to Wireless Access Point
Powered On by Easy Mirroring
(On / Off)
Enables turning on the TV automatically when the mirroring function is
activated from the other devices (smartphone, etc.).
Changing the default configuration may result in higher energy
consumption of the product.
Use the mirroring function to turn on the TV only when you can see the
status of the TV.
Register the devices (smartphone, etc.) before using this function.
LED turns to orange in Standby mode when Powered On by Easy
Mirroring is set to On.
Delete All Pairings
Delete the pairing information for all paired devices.
- 224 -
DVB-via-IP
DVB-via-IP client connection
This TV has DVB-via-IP client function and can connect to DVB-via-IP server
or SAT>IP compatible servers to receive broadcast streaming.
Please ensure that the unit is disconnected from the mains socket before
attaching or disconnecting any cables.
It is recommended to connect to DVB-via-IP server with a LAN cable.
Wired connection
ETHERNET terminal
LAN cable (Shielded)
Use Shielded Twist Pair (STP) LAN cable.
DVB-via-IP server
Satellite dish / Terrestrial aerial / Cable
Wireless connection
Built-in wireless LAN (Rear of the TV)
Access point
DVB-via-IP server
Satellite dish / Terrestrial aerial / Cable
- 225 -
= Note =
External equipment and cables shown are not supplied with this TV.
Check the terminal type and cable plugs are correct for connection.
Due to network conditions or certain broadcaster restrictions, this function
may not be available.
To confirm the current network settings
Network > Network settings > Network Status
For information about the connections, read the manual of the DVB-via-IP
server.
- 226 -
DVB-via-IP Server Selection
Preparations
Ensure the network connections and network settings are completed.
Functions > DVB-via-IP > DVB-via-IP client connection
Network > Network settings
Ensure the server settings are completed. For details, read the manual of
DVB-via-IP server.
DVB-via-IP Server Selection
1. Display the menu with MENU.
2. Select Setup > Tuning Menu > Add TV Signal and press OK to access.
3. Select DVB-via-IP and press OK to access.
4. Select Start Auto Setup and press OK to access.
5. Select a server from Server List and press OK to set.
6. Select Client Settings and press OK to access.
1) Select Unicast Environment / Multicast Environment and press OK to
set.
Select Unicast Environment to use in a home network.
Select Multicast Environment to use in multi family housing units,
hotel, hospital, etc. (All servers are selected automatically.)
2) Select Server List and press OK to access.
7. Select Search Channels and press OK to access.
8. Select a search mode and press OK to access.
9. Set DVB-via-IP Search Mode and press OK to start Auto Setup. (Settings
are made automatically.)
Depending on the server capability (tuner types), you may have to
– Set DVB-via-IP Satellite Configuration to tune DVB-S channels.
Set DVB-via-IP configuration to tune DVB-C or DVB-T channels.
When the operation is completed, the channel at the lowest position will
be displayed.
- 227 -
= Note =
If tuning has not been done completely, set Manual Tuning.
Watching > Tuning and editing channels > Manual Tuning
Due to network conditions or certain broadcaster restrictions, this function
may not be available.
In case you install the DVB-via-IP client in multicast environment, please
consult your professional dealer or server manufacturer.
- 228 -
Note
Due to network conditions or certain broadcaster restrictions, this function
may not be available.
This function is not available when the TV is turned off with Mains Power
On / Off switch.
Please also read the manual of DVB-via-IP server.
- 229 -
Multi Window
Picture in Picture
Displays the digital TV programme and external input (AV / COMPONENT /
HDMI) at once.
1. Display Apps with APPS.
2. Select Multi Window and press OK to access.
How to use
PinP
(yellow)
(green)
PandP
PinP
(blue)
PinP
PinP is Picture-in-Picture mode.
PandP is Picture-and-Picture mode. Main screen displays on the left side
of the screen.
To display / hide the operation guide
To exit multi window
(red)
To change the input mode or channel of sub screen
1) Swap sub screen for main screen with
(blue)
2) Change the input mode or channel by the remote control
3) Swap again with
(blue)
Remote control operations apply to the main screen.
- 230 -
Note
This function may not work properly depending on the signal format.
Not valid in Analogue
Data services are not available in multi window.
The sound comes only from the main screen in multi window.
You cannot change the aspect ratio in multi window.
External input mode can only be displayed either on the main screen or
sub screen.
HDMI is available for the main screen.
Some signals are reformatted for suitable viewing on your display.
Playback in fast-forward or in reverse on the sub screen may affect the
picture quality on the main screen.
- 231 -
VIERA Link “HDAVI Control™”
Summary of VIERA Link
Enjoy additional HDMI Inter-Operability with Panasonic products which have
“HDAVI Control™” function.
VIERA Link (HDAVI Control) connects the TV and the equipment with
VIERA Link function, and enables easy control, playback, energy saving,
creating home theatre, etc. without complicated settings. Connections to the
equipment (DVD Recorder, HD Video Camera, Player theatre, Amplifier, etc.)
with HDMI cable allow you to interface them automatically. These features are
limited to models incorporating “HDAVI Control” and “VIERA Link”.
This TV supports “HDAVI Control 5” function.
Some functions are not available depending on the equipment’s version
of HDAVI Control. Confirm the connected equipment’s version of HDAVI
Control.
VIERA Link “HDAVI Control” is a unique function that we have developed
and added based on the control functions provided by HDMI which is an
industry standard known as HDMI CEC (Consumer Electronics Control).
As such, its operation with other manufacturers’ product that supports
HDMI CEC cannot be guaranteed.
VIERA Link features may be available even with other manufacturers’
equipment supporting HDMI CEC.
Please refer to individual manuals for other manufacturers’ product
supporting VIERA Link function.
About applicable Panasonic product, consult your local Panasonic dealer.
- 232 -
VIERA Link (HDMI connection)
Use a fully wired HDMI compliant cable.
Connect the equipment supporting VIERA Link to the TV’s HDMI terminal
via an HDMI cable.
About HDMI cable for connecting Panasonic HD Video Camera or LUMIX
Camera, read the manual of the equipment.
HDMI terminal
HDMI cable
Equipment with VIERA Link function (DVD Recorder / DVD Player / Blu-
ray Disc Player / HD Video Camera / LUMIX Camera)
Available features (HDMI connection)
DVD Recorder / DVD Player / Blu-ray Disc Player
Easy playback
Power on Link
Power off Link
Standby Power Save
Intelligent Auto Standby
VIERA Link Control
HD Video Camera / LUMIX Camera
Easy playback
Power on Link
Power off Link
VIERA Link Control
: For equipment which has “HDAVI Control 2 or later” function.
: For equipment which has “HDAVI Control 4 or later” function.
- 233 -
VIERA Link (HDMI and Audio out connections)
Use a fully wired HDMI compliant cable.
Connect the equipment supporting VIERA Link to the TV’s HDMI terminal
via an HDMI cable.
Use the optical digital audio cable for audio output from the TV.
HDMI terminal / DIGITAL AUDIO
HDMI cable
DVD Recorder with VIERA Link function
HDMI cable (Optical digital audio cable )
Amplifier with VIERA Link function
Speaker system
Player theatre / Blu-ray Disc theatre with VIERA Link function
HD Video Camera / LUMIX Camera with VIERA Link function
: If the connected equipment has “HDAVI Control 5” function, you do not
have to use this audio cable (Optical digital audio cable). In this case,
connect the equipment to the TV’s HDMI2 terminal via an HDMI cable.
- 234 -
Available features (HDMI and Audio out connections)
Player theatre
Easy playback
Power on Link
Power off Link
Intelligent Auto Standby
VIERA Link Control
Speaker Selection
Blu-ray Disc theatre
Easy playback
Power on Link
Power off Link
Standby Power Save
Intelligent Auto Standby
VIERA Link Control
Speaker Selection
Amplifier
Power off Link
Intelligent Auto Standby
Speaker Selection
: For equipment which has “HDAVI Control 2 or later” function.
: For equipment which has “HDAVI Control 4 or later” function.
: While playing a disc
: Except for watching a disc
- 235 -
VIERA Link Control of compatible equipment
The following is the maximum number of compatible equipment that can be
controlled by VIERA Link Control. This includes connections to equipment
already connected to the TV.
For example, DVD Player connected to Amplifier which is connected to the TV
via an HDMI cable.
Functions > VIERA Link “HDAVI Control™” > VIERA Link Control
Recorder:
Maximum 3
Player:
Maximum 3 (DVD Player, Blu-ray Disc Player, HD Video Camera,
LUMIX Camera, Digital Camera, Player theatre, Blu-ray Disc theatre,
etc.)
Audio system:
Maximum 1 (Player theatre, Blu-ray Disc theatre, Amplifier, etc.)
Tuner:
Maximum 4 (Set top box, etc.)
- 236 -
Preparations
Connect the equipment supporting VIERA Link.
For details of VIERA Link connections
Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link
Use a fully wired HDMI compliant cable.
Set up the connected equipment. Read the manual of the equipment.
Set VIERA Link to On in the Setup Menu.
Set up the TV. After connection, turn the equipment on and then switch the
TV on. Select the HDMI input from Input Selection with AV and make sure
that an image is displayed correctly. (This setup should be done each time
the following conditions occur.)
First time operation
Adding or reconnecting equipment
Changing setup
- 237 -
Easy playback
Automatic input switching - When the connected equipment is operated, the
input mode is switched automatically.
- 238 -
Power on Link
Set Power on Link to On in VIERA Link Settings to use this function.
When the connected equipment is operated, the TV is automatically turned
on. (Only when the TV is in Standby mode.)
- 239 -
Power off Link
Set Power off Link to On in VIERA Link Settings to use this function.
When the TV is set to Standby mode, the connected equipment is also
automatically set to Standby.
This function will work even if the TV enters Standby mode automatically
by auto power standby function.
- 240 -
Standby Power Save
Set Standby Power Save to On in VIERA Link Settings to use this function.
The power consumption of the connected equipment in Standby mode is
controlled higher or lower in synchronisation with the TV on / off state to
reduce the consumption.
When the TV is set to Standby mode, the connected equipment is
automatically set to Standby and the power consumption of the connected
equipment is automatically minimised.
When the TV is turned on, the connected equipment is still in Standby mode,
but the power consumption is increased to quickly start the connected
equipment.
This function is effective if the connected equipment can change the power
consumption in Standby mode and is set to higher consumption.
This function works when Power off Link is set to On.
- 241 -
Intelligent Auto Standby
Set Intelligent Auto Standby to On in VIERA Link Settings to use this function.
When the TV is on, non-used connected equipment goes into Standby mode
automatically to reduce the power consumption. For example, when the input
mode is switched from HDMI or when Speaker Selection is changed to TV
(except for watching a disc).
This function may not work properly depending on the connected
equipment. In this case, set to Off.
- 242 -
VIERA Link Control
You can control some functions of the connected equipment with this TV’s
remote control by pointing at the TV’s signal receiver.
1. Display Apps with APPS.
2. Select VIERA Link and press OK to access.
3. Select VIERA Link Control and press OK to access.
4. Select one of the following items and press OK to access.
Recorder / Player / Home Cinema / Video Camera / LUMIX / Digital
Camera / Other
(The menu of the accessed equipment is displayed. The input mode is
changed automatically.)
The displayed item may vary depending on the connected equipment.
Home Cinema means Player theatre, Blu-ray Disc theatre or Recorder
theatre.
Other means Tuner set top box.
5. Follow the on-screen instructions to operate the menu of the equipment.
Confirm the remote control code is “73”.
Watching > External equipment > Operating with TV’s remote control
To display the operation guide
OPTION
(If other manufacturers’ product is accessed, Setup / Contents
Selection menu may be displayed.)
Available TV’s remote control buttons depend on the connected
equipment.
If multiple recorders or players are connected
Each recorder / player is numbered. The number is given from the TV’s
lower number of HDMI terminal connected to the same type of equipment.
For example, when two recorders are connected to HDMI2 and HDMI3, the
recorder connected to HDMI2 is displayed as Recorder1, and the recorder
connected to HDMI3 is displayed as Recorder2.
If you access non-VIERA Link equipment
The type of the connected equipment is displayed. Although you can access
the connected equipment, you cannot operate it. Use the remote control of
the connected equipment.
- 243 -
= Note =
If you cannot operate the equipment, check the settings and the
equipment.
Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link
Some operations may not be available depending on the equipment. In
this case, use the remote control of the connected equipment.
For details of the operations for the connected equipment, read the
manual of the equipment.
- 244 -
Speaker Selection
You can control the theatre speaker with this TV’s remote control by pointing
at the TV’s signal receiver.
1. Display Apps with APPS.
2. Select VIERA Link and press OK to access.
3. Select Speaker Selection and press OK to access.
4. Select TV / Home Cinema and press OK to set.
TV:
TV speakers are active.
Home Cinema:
The sound is delivered from theatre speakers. Player theatre, Blu-
ray Disc theatre or Amplifier will be automatically turned on if it is in
Standby mode.
The sound of TV speakers is mute. When the equipment is turned
off, TV speakers will be activated.
You can use Volume Up / Down and MUTE.
Multi-channel sound
If you want to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via
an Amplifier, connect it with an HDMI cable and Optical digital audio cable,
and then select Home Cinema. If your Amplifier has the “HDAVI Control 5”
function, you only need to connect it with an HDMI cable to the TV’s HDMI2
terminal.
To enjoy multi-channel sound from DIGA Recorder, connect an HDMI cable
from the DIGA Recorder to the Amplifier.
= Note =
If you cannot operate the equipment, check the settings and the
equipment.
Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link
Some operations may not be available depending on the equipment.
- 245 -
Note
These functions may not work properly depending on the connected
equipment.
Image or sound may not be delivered for the first few seconds when the
input mode is switched.
“HDAVI Control 5” is the newest standard for HDAVI Control compatible
equipment. This standard is compatible with conventional HDAVI
equipment.
To confirm the HDAVI Control version of this TV
Support > Help menu > Using Help menu
- 246 -
Child Lock
Using Child Lock
You can lock specific channels / AV input terminals to restrict access to them.
When the locked channel / input is selected, a message appears. Enter the
PIN number to watch.
1. Display the menu with MENU.
2. Select Setup > Child Lock and press OK to access.
3. Enter the PIN number (4 digits) with Numeric buttons.
Enter the PIN number twice at first setting.
Make a note of the PIN number in case you forget it.
“0000” may be stored as the default PIN number depending on the
country you select.
4. Select Child Lock List and press OK to access.
5. Select the channel / input and press OK to lock.
appears when the channel / input is locked.
To cancel
1) Select the locked channel / input.
2) Press OK.
To sort channel names in alphabetical order
(red)
To lock all
(green)
To cancel all locks
(yellow)
To jump to the head of the next channel / input group
(blue)
Show Adult App
Set to Off to lock specific applications to restrict access to them (if available).
= Note =
For internet content
- 247 -
PIN number
You can change the PIN number.
1. Select Change PIN and press OK to access.
2. Enter a new PIN number twice with Numeric buttons.
= Note =
Setting Shipping Condition erases the PIN number and all settings.
- 248 -
Parental Rating
To watch the DVB programme that has rating information on the selected age,
enter the PIN number (depending on the broadcaster).
1. Select Parental Rating and press OK to access.
2. Select an age for the restriction of programmes and press OK to set.
The availability of this function depends on the country you select.
= Note =
Setting Shipping Condition erases the PIN number and all settings.
- 249 -
Data Service Application
Using Data Service Application
You can enjoy Hybrid Broadcast Broadband TV application that may be
provided via digital broadcasting as interactive data services.
1. Select the mode with TV.
DVB-S / DVB-C / DVB-T / DVB-via-IP
2. Display the menu with MENU.
3. Select Setup > Data Service Application > Service and press OK to
access.
4. Select Auto Start On and press OK to set.
A notification message will appear when the application is available.
Follow the on-screen instructions.
is displayed on the information banner if the programme has Hybrid
Broadcast Broadband TV application.
Watching > Basic > Information banner
To terminate the running application. (The default application may start
immediately.)
EXIT
- 250 -
Cookie
1. Display the menu with MENU.
2. Select Setup > Data Service Application > Store Cookie / Delete Cookie
and press OK to access.
Store Cookie
(On / Off)
Enables storing the technical information that a data service application
leaves into the TV in order to recognise to use it again.
Delete Cookie
Deletes all of technical information left by a data service application.
- 251 -
Note
A broadband network environment is required to fully use Hybrid
Broadcast Broadband TV application. Ensure the network connections and
network settings are completed.
Network > Network connections
Network > Network settings
Not all the data services are available depending on the country, area and
broadcaster.
Not valid in multi window mode
Depending on the connection environment, the internet connection may be
slow or may not be successful.
Operations may vary depending on the broadcaster. Follow the on-screen
instructions.
On-screen instructions may not correspond to the remote control buttons.
- 252 -
Common Interface
Caution
If the encrypted message is displayed on the screen, the correct Common
Interface (CI) Module and smart card that are required for this service are not
inserted.
How to insert CI module and smart card
Turn the TV off with Mains Power On / Off switch whenever inserting or
removing the CI module.
If a smart card and a CI module come as a set, first insert the CI module,
then insert the smart card into the CI module.
Insert or remove the CI module completely in the correct direction as
shown.
Remove the CI module from the TV when placing the TV facing upward.
This may cause damages to the CI module and CI slot.
= Note =
There might be some CI modules in the market with older firmware
versions that do not work fully interoperable with this new CI+ v1.3 TV. In
this case, please contact your content provider.
- 253 -
Using Common Interface
The Common Interface Module menu provides access to software contained
in Common Interface (CI) Modules.
This function may not be available in some countries or regions.
Video and audio signals may not be output depending on the broadcast or
service.
Although CI module may enable you to view some services, this TV does not
guarantee all services (e.g. encrypted pay-TV channels). Please use only the
broadcaster-approved CI module. Consult the operator / broadcaster or CI
module manufacturer for more information and conditions of the services.
Insert the CI module (optional)
Normally encrypted channels will appear. (Viewable channels and their
features depend on the CI module.) If encrypted channels do not appear,
take the following steps.
For details, read the manual of the CI module, or check with the content
provider.
1. Select the mode with TV.
DVB-S / DVB-C / DVB-T
2. Display the menu with MENU.
3. Select Setup > Common Interface and press OK to access.
4. Select Slot 1:, press OK and follow the on-screen instructions.
On-screen instructions may not correspond to the remote control buttons.
- 254 -
Shipping Condition
Shipping Condition
Resets the TV to its original condition (i.e. no channels tuned in).
All settings other than USB Device Setup are reset (channels, picture, sound
settings, etc.).
1. Display the menu with MENU.
2. Select Setup > System Menu > Shipping Condition and press OK to
access.
Child Lock PIN number is required depending on the country. If you
have forgotten your changed PIN, input “6969” as the PIN number.
Functions > Child Lock > PIN number
3. When a confirmation screen is displayed, select Yes and press OK to set.
4. Follow the on-screen instructions.
Auto Setup automatically starts.
= Note =
To retune TV channels only (e.g. after moving house), set Auto Setup.
Watching > Tuning and editing channels > Auto Setup
- 255 -
Updating the TV Software
Information
A new version of software may be released for download to enhance the
performance or operations of the TV.
If there is an update available and the channel has the update information, a
notification message is displayed.
To install new software, select Standby / Now and press OK to set.
Standby:
Installs new software in standby condition.
Now:
Installs new software now.
- 256 -
Auto update
You can update new software automatically.
1. Display the menu with MENU.
2. Select Setup > System Menu > System Update > Auto Update Search in
Standby and press OK to access.
3. Select the time and press OK to set.
If any software updates are available, a notification message will appear.
To install new software, select Standby / Now and press OK to set.
Standby:
Installs new software in standby condition.
Now:
Installs new software now.
If System Update is performed, the software will be updated (TV functions
may be changed). If you do not want to do so, set Auto Update Search in
Standby to Off.
The automatic updating cannot be performed in the following conditions:
TV turned off with Mains Power On / Off switch
Recording is in progress.
DVB-via-IP
= Note =
Download may take a few hours.
During software download and update, DO NOT switch off the TV.
A notification message may be a reminder. In this case, schedule
information (the date when the new version can be used) will appear. You
can set the reservation for update. The update will not start when the TV is
off.
- 257 -
Manual update
You can update new software manually.
1. Display the menu with MENU.
2. Select Setup > System Menu > System Update > System Update Search
Now and press OK to access.
3. Searches for an update (for several minutes) and displays a corresponding
message if any.
4. Download with OK.
= Note =
Download may take a few hours.
During software download and update, DO NOT switch off the TV.
- 258 -
Setting characters
Using Numeric buttons
You can enter characters for free input items using Numeric buttons.
Press Numeric buttons repeatedly until you reach the desired character.
: . @ / 1 ! : # + - * _ ( ) “ ‘ % & ? , ; = $ [ ] ~ < > { } | ` ^ \
: a b c 2 A B C
: d e f 3 D E F
: g h i 4 G H I
: j k l 5 J K L
: m n o 6 M N O
: p q r s 7 P Q R S
: t u v 8 T U V
: w x y z 9 W X Y Z
: Space 0
The character is set automatically if you leave for 1 second.
You can also set the character pressing OK or other Numeric buttons less
than 1 second.
The characters may vary depending on the input item.
- 259 -
Keyboard
Keyboard
Keyboards requiring the drivers are not supported.
To change the language type, set USB Keyboard Layout.
1) Display the menu with MENU.
2) Select Setup > System Menu > USB Keyboard Layout and press OK to
access.
3) Select the language and press OK to set.
Characters may not be displayed correctly on the TV screen depending on
the connected keyboard or the keyboard layout setting.
Some of the keys of keyboards may correspond to the operation of the
remote control.
Keyboard Remote Control
↑/↓/←/→
/ / /
Enter OK
Backspace BACK/RETURN
Esc EXIT
0 - 9 / Character Numeric buttons
F1 HOME
F2 APPS
F3 MENU
F4 AV
F5 / F6 Channel Down / Up
F7 / F8 Volume Down / Up
F9 / F10 / F11 / F12 Coloured buttons
- 260 -
Settings
Setting menu
How to use
Various menus allow you to make settings for the picture, sound, and other
functions.
1. Display the menu with MENU.
Displayed items vary depending on the input signal.
2. Select the menu and press OK to access.
3. Select the items and press OK to access.
Only available items can be selected.
You can also access from eHELP pressing (red) at each item (if
available).
You can select from among alternatives with / and press OK to set.
You can adjust using the slide bar with / and press OK to set.
You can go to the next screen with OK.
You can enter names or numbers freely for some items.
1) Enter characters one by one with Cursor buttons and press OK to set.
You can set characters using Numeric buttons.
Functions > Setting characters > Using Numeric buttons
2) Press BACK/RETURN to store.
To reset the settings
To initialise picture or sound settings only, select Reset to Defaults in
the Picture Menu or Sound Menu.
To initialise all settings, select Shipping Condition.
Functions > Shipping Condition
- 261 -
To exit the menu screen
EXIT
To return to the previous screen
BACK/RETURN
= Note =
Menu items and selectable options vary depending on the mode (TV
mode, Media Player, Network services, etc.).
Some settings in Picture menu may also affect the menu screen when
watching content in 4K format.
Using control panel buttons
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu.
2. Select and set with following control panel buttons.
Move the cursor / select from a range of options / select the menu item
/ adjust levels
Access the menu / store settings after adjustments have been made or
options have been set with INPUT/OK/HOLD for MENU button
- 262 -
Picture
Viewing Mode
Selects your favourite picture mode for each input.
(Dynamic / Normal / Cinema / True Cinema / Custom)
Watching > For best picture > Viewing Mode
- 263 -
Basic settings
Backlight, Contrast, Brightness, Colour, Tint, Sharpness
Adjusts the levels of these options according to your personal preference.
Watching > For best picture > Basic settings
Sharpness is not available when 1080p Pixel by 4pixels is set to On.
Colour Temperature
Sets the overall colour tone of the picture (bluer - redder).
Watching > For best picture > Basic settings
Vivid Colour
(On / Off)
Automatically adjusts colours to vivid ones.
Watching > For best picture > Basic settings
Adaptive Backlight Control
Automatically controls the level of backlight according to the images.
Watching > For best picture > Basic settings
Intelligent Frame Creation
(Max / Mid / Min / Off)
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth.
Watching > For best picture > Basic settings
Depending on the content, images may be noisy. To prevent the noise,
change the setting.
Not valid in the following conditions:
Game Mode is set to On.
1080p Pixel by 4pixels is set to On.
1080p Pure Direct is set to On.
4K Pure Direct is set to On.
Clear Motion
(On / Off)
Makes the moving pictures more clear by controlling the level of backlight.
Watching > For best picture > Basic settings
- 264 -
Ambient Sensor
Automatic Brightness Control function
Adjusts picture settings automatically depending on ambient lighting
condition.
(On / Off)
Watching > For best picture > Ambient Sensor
- 265 -
Noise reduction settings
Noise Reduction
(Auto / Max / Mid / Min / Off)
Reduces unwanted picture noise.
Watching > For best picture > Noise reduction settings
Not valid in the following conditions:
4K content
Game Mode is set to On.
1080p Pixel by 4pixels is set to On.
1080p Pure Direct is set to On.
4K Pure Direct is set to On.
MPEG Remaster
(Auto / Max / Mid / Min / Off)
Reduces flicker noise in contoured parts of a picture and block noise.
Watching > For best picture > Noise reduction settings
Not valid in the following conditions:
4K content
Game Mode is set to On.
1080p Pixel by 4pixels is set to On.
1080p Pure Direct is set to On.
4K Pure Direct is set to On.
- 266 -
Advanced Settings
You can adjust and set up the detailed picture settings.
Watching > For best picture > Advanced Settings
This function is available when Viewing Mode is set to Cinema, True
Cinema or Custom.
- 267 -
Option Settings
Game Mode
(On / Off)
Provides suitable images for fast response signals when playing games.
Watching > For best picture > Option Settings
Not valid in the following conditions:
TV mode
1080p Pixel by 4pixels is set to On.
1080p Pure Direct is set to On.
4K Pure Direct is set to On.
Film Cadence Mode
(Auto / On / Off)
Improves vertical resolution for movie images.
Watching > For best picture > Option Settings
This function is available for interlaced signals (except in the mode of multi
window, Network services or when Game Mode is set to On).
1080p Pure Direct
(On / Off)
Reproduces the original image quality in detail for 1080p (HDMI) input signal.
Watching > For best picture > Option Settings
Not valid in the following conditions:
Multi window
1080p Pixel by 4pixels is set to On.
4K Pure Direct
(On / Off)
Reproduces the original image quality in detail for 4K (HDMI) input signal.
Watching > For best picture > Option Settings
Not valid in multi window mode
- 268 -
1080p Pixel by 4pixels
(On / Off)
Displays like pixel by pixel to make the image sharper for 1080p signal.
Watching > For best picture > Option Settings
For HDMI
Not all image may be displayed as pixel by pixel precisely.
Not valid in multi window mode
HDMI Content Type
(Graphics / Photos / Auto / Off)
Adjusts the picture settings of each HDMI input according to the selected
content type.
Watching > For best picture > Option Settings
For HDMI
HDMI RGB Range
(Auto / Full / Normal)
Adjusts the black level of the image for each HDMI input.
Watching > For best picture > Option Settings
For HDMI
AV Colour System
(Auto / PAL / SECAM / M.NTSC / NTSC)
Selects optional colour system based on video signals.
Watching > For best picture > Option Settings
For AV (VIDEO)
3D-COMB
(On / Off)
Makes still or slow moving pictures more vivid.
Watching > For best picture > Option Settings
For PAL / NTSC signal reception in TV mode or from composite
connection
- 269 -
Screen Settings
16:9 Overscan
(On / Off)
Selects the screen area displaying the image for 16:9 aspect.
Watching > For best picture > Screen Settings
Not valid in the following conditions:
4K content
Photo content
Game Mode is set to On.
1080p Pixel by 4pixels is set to On.
1080p Pure Direct is set to On.
4K Pure Direct is set to On.
Multi window
Zoom Adjustments
Adjusts the vertical position and size when aspect is set to Zoom.
Watching > For best picture > Screen Settings
Not valid in the following conditions:
4K content
Multi window
Screen Display
(On / Off)
Turns the screen off when you select Off.
Watching > For best picture > Screen Settings
- 270 -
Copy Adjustment
Copies the picture settings of True Cinema or Custom to those of the other
input mode or Viewing Mode.
Watching > For best picture > Copy Adjustment
- 271 -
Reset to Defaults
Resets the current Picture Viewing Mode to the default settings.
- 272 -
Sound
Mode
Selects your favourite sound mode for each input.
(Standard / Music / Ambience / User)
Watching > For best audio > Sound mode
- 273 -
Basic settings
Bass
Adjusts level to enhance or minimise lower, deeper sound output.
Watching > For best audio > Basic settings
Treble
Adjusts level to enhance or minimise sharper, higher sound output.
Watching > For best audio > Basic settings
Equaliser
Adjusts the frequency level to suit your favourite sound quality.
Watching > For best audio > Basic settings
Balance
Adjusts volume level of right and left speakers.
Watching > For best audio > Basic settings
Surround
(Diffuse Surround / Virtual Surround / Off)
Selects surround sound settings.
Watching > For best audio > Basic settings
Bass Boost
(On / Off)
Enhances the effect of bass sounds.
Watching > For best audio > Basic settings
- 274 -
Volume settings
Speaker Selection
(TV / Home Cinema)
Enables controlling the theatre speaker with this TV’s remote control by
pointing at the TV’s signal receiver.
Watching > For best audio > Volume settings
This function is available when the theatre speakers supporting VIERA
Link function is connected to this TV.
TV Speaker Setting
(TV Speaker / Headphone / Off)
Selects the sound output to adjust volume.
Watching > For best audio > Volume settings
Headphone Volume
Adjusts the volume of headphones.
Watching > For best audio > Volume settings
Auto Gain Control
(On / Off)
Automatically regulates large sound level differences between channels and
inputs.
Watching > For best audio > Volume settings
Volume Correction
Adjusts the volume of each individual channel or input mode.
Watching > For best audio > Volume settings
Speaker Distance to Wall
(Up to 30cm / Over 30cm)
Compensates for the low frequency sound due to the distance between the
speakers and the wall.
Watching > For best audio > Volume settings
- 275 -
Voice Guidance Settings
Voice Guidance
(On / Off)
Set to On to enable voice guidance of the basic features (on-screen
messages, etc.) for visually impaired users.
Watching > For best audio > Voice Guidance Settings
Not valid in multi window mode
Speed
(Fast / Normal / Slow)
Selects the readout speed for the voice guidance.
Watching > For best audio > Voice Guidance Settings
Volume
(Max / Mid / Min)
Selects the volume for the voice guidance.
Watching > For best audio > Voice Guidance Settings
Language
Changes language for the voice guidance.
Watching > For best audio > Voice Guidance Settings
User Level
(Beginner / Expert)
Selects the level of verbosity for the voice guidance.
Watching > For best audio > Voice Guidance Settings
Web Browser
(On / Off)
Set to On to enable voice guidance of the network content in web browser
function.
Watching > For best audio > Voice Guidance Settings
- 276 -
Audio Description
Preferred Audio Type
(Audio Description / Standard)
Narration settings for visually impaired users
Watching > For best audio > Audio Description
For DVB
Volume
Adjusts the volume for Audio Description.
Watching > For best audio > Audio Description
For DVB
Speakers
(Mix / Standard)
Set to Mix to activate the description sound track from TV speakers.
Watching > For best audio > Audio Description
For DVB
Headphones
(Mix / Standard)
Set to Mix to activate the description sound track from headphones.
Watching > For best audio > Audio Description
For DVB
- 277 -
Advanced settings
MPX
Selects multiplex sound mode (if available).
Watching > For best audio > Advanced settings
For Analogue
Audio Preference
(Auto / Multichannel / Stereo / MPEG)
Selects the initial setting for audio tracks.
Watching > For best audio > Advanced settings
For DVB
SPDIF Selection
(Auto / PCM)
Selects the initial setting for digital audio output signal from DIGITAL AUDIO
and HDMI2 (ARC function) terminals.
Watching > For best audio > Advanced settings
For DVB, video content
HDMI Audio Format
(Auto / Bitstream / PCM)
Selects the audio format for the HDMI input signal.
Watching > For best audio > Advanced settings
PCM Optical Level
Adjusts the audio level of PCM output from DIGITAL AUDIO and HDMI2 (ARC
function) terminals to equalise with that of the other audio types.
Watching > For best audio > Advanced settings
SPDIF Delay
Adjusts the delay time of the sound output from DIGITAL AUDIO and HDMI2
(ARC function) terminals if the sound does not synchronise the image.
Watching > For best audio > Advanced settings
For DVB
- 278 -
HDMI Input
(Digital / Analogue)
Selects to fit the input signal.
Watching > For best audio > Advanced settings
For HDMI
- 279 -
Reset to Defaults
Resets the current Sound Mode to the default settings.
- 280 -
Network
Network Connection
Sets the network setting to use this TV in your network environment.
Network > Network settings > Network Connection
- 281 -
Network Status
Displays and checks the network status (MAC Address, current network
settings, etc.).
Network > Network settings > Network Status
- 282 -
my Home Cloud Settings
Notices
Displays the terms of service.
Network > Network settings > my Home Cloud Settings
- 283 -
VIERA Name
Sets your favourite name for this TV.
Network > Network settings > VIERA Name
- 284 -
TV Remote App Settings
Sets to control the TV from network equipment (smartphone, etc.).
Network > Network settings > TV Remote App Settings
- 285 -
Network Link Settings
Sets to control the TV with devices connected to the network.
Network > Network settings > Network Link Settings
- 286 -
TV Anywhere Settings
You can set timer programming with the network equipment (smartphone,
etc.) from outside the home network.
Functions > TV Anywhere > How to use
- 287 -
File Sharing Settings
File Sharing Server
(On / Off)
Sets to share the files between PC and devices connected to this TV.
Media Player > Using Media Player > Sharing file
Network Device List
Lists the accessible network devices to play back the content in Media Player.
Media Player > Using Media Player > Network device
- 288 -
Mirroring Settings
Settings for the mirroring function
Functions > Mirroring > Mirroring Settings
- 289 -
Do Not Track Setting
Sets to notify websites and some applications about tracking your browsing
activities.
Network > Network settings > Do Not Track Setting
- 290 -
Other settings
Software Update
Checks for available software updates from the Panasonic website.
Network > Network settings > Software Update
New Software Message
(On / Off)
Selects whether to give a notification message when new software is found
via network or not.
Network > Network settings > New Software Message
- 291 -
Timer
Off Timer
Sets the duration of time until the TV automatically goes into Standby mode.
(90 / 75 / 60 / 45 / 30 / 15 / Off (minutes))
Watching > Basic > Off Timer
- 292 -
Timer Programming
Sets a timer to record forthcoming programmes.
Recording > Timer Programming > Setting Timer Programming
For DVB
- 293 -
Time Zone
Adjusts the time data.
Watching > Basic > Adjusting time
- 294 -
Auto Standby
Automatically turns the TV to Standby mode for energy saving when no
operation is performed for 4 hours.
(On / Off)
Watching > Basic > Energy saving functions
- 295 -
No signal Power off
Automatically turns the TV to Standby mode to prevent unnecessary power
consumption when no signal is received and no operation is performed for 10
minutes.
(On / Off)
Watching > Basic > Energy saving functions
- 296 -
Setup
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode.
Watching > Basic > Energy saving functions
- 297 -
Voice Control Settings
Settings for Voice Control function
Functions > Voice Control > Settings
- 298 -
USB Device Setup
Formats the USB HDD or safely removes USB device.
Recording > USB HDD setup > Setting for USB HDD
- 299 -
Recording Setup
Settings for the recording feature of the USB HDD
Recording > Recording current programme > One Touch Recording
Recording > Recording current programme > REW LIVE TV
- 300 -
Child Lock
Applies access control for channels or inputs to prevent unwanted access.
Functions > Child Lock > Using Child Lock
- 301 -
Tuning Menu
Favourites Edit
Creates a list of favourite channels.
Watching > Tuning and editing channels > Favourites Edit
Not valid in Analogue
Channel List
You can edit the channel list by adding / deleting and moving channels.
Watching > Tuning and editing channels > Channel List
Auto Setup
Automatically searches for receivable channels.
Watching > Tuning and editing channels > Auto Setup
Manual Tuning
Searches for channels manually.
Watching > Tuning and editing channels > Manual Tuning
Update Channel List
Updates the channel list while keeping your settings.
Watching > Tuning and editing channels > Update Channel List
For DVB
Favourite Network
Selects your favourite network for each broadcaster (only available in some
countries).
Watching > Tuning and editing channels > Other settings
For DVB-C, DVB-T
New Channel Message
(On / Off)
Selects whether to give a notification message when a new channel is found
or not.
Watching > Tuning and editing channels > Other settings
For DVB
- 302 -
Service Replacement
(On / Off)
Set to On to display a message to switch to the available service (only
available in some countries).
Watching > Tuning and editing channels > Other settings
For DVB-C, DVB-T
Signal Condition
Checks the signal condition.
Watching > Tuning and editing channels > Signal Condition
Not valid in Analogue
Antenna System
(One LNB / MiniDiSEqC / DiSEqC 1.0 / Single Cable)
Sets the antenna system to use plural LNBs for receiving several satellites.
Watching > Tuning and editing channels > Auto Setup
For DVB-S
LNB Configuration
Selects the satellite for each LNB.
Watching > Tuning and editing channels > Auto Setup
For DVB-S
Attenuator
(On / Off)
Automatically reduces the DVB-C signal to avoid the interference.
Watching > Tuning and editing channels > Other settings
Add TV Signal
Adds the TV mode.
Watching > Tuning and editing channels > Other settings
- 303 -
= Note =
The settings in Tuning Menu are applicable only for the selected TV mode.
The menu name varies depending on the TV mode. (DVB-S Tuning Menu
/ DVB-C Tuning Menu / DVB-T Tuning Menu / DVB-via-IP Tuning Menu /
Analogue Tuning Menu)
- 304 -
Language
OSD Language
Changes language for on-screen displays.
Watching > Basic > Language
Preferred Audio 1 / 2
Selects the first and second preferred language for DVB multi audio
(depending on the broadcaster).
Watching > Basic > Language
Preferred Subtitles 1 / 2
Selects the first and second preferred language for DVB subtitles (depending
on the broadcaster).
Watching > Basic > Language
Preferred Teletext
Selects the preferred language for DVB teletext service (depending on the
broadcaster).
Watching > Basic > Language
- 305 -
Display Settings
Preferred Subtitle Type
(Standard / Hard of Hearing)
Selects the preferred subtitle type.
Watching > Basic > Subtitle
Teletext
(TOP (FLOF) / List)
Selects teletext display mode.
Watching > Teletext > Teletext mode
Teletext Character Set
(West / East1 / East2)
Selects teletext language font.
Watching > Teletext > Teletext Character Set
Input Labels
Accessing the input labels list allows you to change the input name or skip
the input if unconnected, improving identification and selection in the Input
Selection banner.
Watching > External equipment > Watching external input
Banner Display Timeout
(10 / 9 / 8 / 7 / 6 / 5 / 4 / 3 / 2 / 1 / 0 (No display) (seconds))
Sets how long the information banner stays on screen.
Watching > Basic > Information banner
Smart Banner
(On / Off)
Displays the introduction banner for the internet service.
Watching > Basic > Information banner
- 306 -
Playing Time Display
(On / Off)
Set to On to display a time period of continuous use in Game Mode on the top
right of the screen every 30 minutes.
Watching > External equipment > Watching external input
This function is available when Game Mode is set to On.
Radio Mode
(20 / 15 / 10 / 5 / Off (seconds))
Sets the timer for turning off the screen automatically when a radio channel is
selected.
Watching > Basic > Energy saving functions
Info Frame at Power on
(On / Off)
Displays Info Frame when the TV is turned on.
Functions > Info Frame > Settings
Notification
(On / Off)
Displays a notification message.
- 307 -
HDMI Auto Setting
Set to Mode1 when the image or sound in HDMI input is not played properly.
(Mode1 / Mode2)
Watching > 4K resolution > HDMI Auto Setting
For HDMI1/2
- 308 -
Common Interface
Sets to watch encrypted channels, etc.
Functions > Common Interface > Using Common Interface
- 309 -
VIERA Link Settings
VIERA Link
(On / Off)
Sets to use VIERA Link functions.
Functions > VIERA Link “HDAVI Control™” > Preparations
Power on Link
(On / Off)
Sets to use Power on Link functions.
Functions > VIERA Link “HDAVI Control™” > Power on Link
Power off Link
(On / Off)
Sets to use Power off Link functions.
Functions > VIERA Link “HDAVI Control™” > Power off Link
Standby Power Save
(On / Off)
Controls the connected equipment to reduce power consumption in Standby.
Functions > VIERA Link “HDAVI Control™” > Standby Power Save
This function is available when VIERA Link is set to On and Power off Link
is set to On.
Intelligent Auto Standby
(On / Off)
Makes non-watched or non-used connected equipment go into Standby mode
to reduce the power consumption.
Functions > VIERA Link “HDAVI Control™” > Intelligent Auto Standby
This function is available when VIERA Link is set to On.
- 310 -
Data Service Application
Service
(Auto Start On / Auto Start Off / Off)
Sets to use Hybrid Broadcast Broadband TV application.
Not all the data services are available depending on the country, area and
broadcaster.
Functions > Data Service Application > Using Data Service Application
For DVB
Store Cookie
(On / Off)
Sets to store the information from a data service to the TV in order to access
again quickly.
Functions > Data Service Application > Cookie
Delete Cookie
Deletes all the information from a data service.
Functions > Data Service Application > Cookie
- 311 -
System Menu
USB Keyboard Layout
Selects the language that your USB Keyboard supports.
Functions > Keyboard > Keyboard
Shipping Condition
Resets all settings to the original condition.
Functions > Shipping Condition > Shipping Condition
System Update
Downloads new software to this TV.
Functions > Updating the TV Software > Auto update
Licence Menu
Displays the software licence information.
- 312 -
Other Settings
Power Save
(On / Off)
Reduces brightness of the picture to economise on power consumption.
Exchange Channel List
Exports / Imports DVB-S Channel List settings using the USB device to share
the same settings with VIERA which has the same function.
Watching > Tuning and editing channels > Channel List
- 313 -
Support
Help menu
Using Help menu
1. Display the menu with MENU.
2. Select Help and press OK to access.
3. Select About Firefox OS / TV Self Test / System Information / Device
Information and press OK to access.
About Firefox OS
Displays the information about Firefox OS.
TV Self Test
Makes a diagnosis of picture or sound problems.
Follow the on-screen instructions.
System Information
Displays the system information of this TV.
Device Information
Displays the device information of this TV.
- 314 -
FAQs
Picture
Before requesting service or assistance, please follow these simple guides to
solve the problem. Also makes a diagnosis of picture problem in TV Self Test.
Support > Help menu > Using Help menu
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Auto aspect
Auto aspect is designed to provide you with the best ratio to fill the screen.
Watching > For best picture > Aspect Control Signal
Press ASPECT if you want to change the aspect ratio manually.
Watching > For best picture > Aspect
Black and white picture
Check that the output of the external equipment matches the input of the
TV.
Chaotic image, noisy
Set Noise Reduction and MPEG Remaster in the Picture Menu to remove
noise.
Watching > For best picture > Noise reduction settings
Check nearby electrical equipment (car, motorcycle, fluorescent lamp).
- 315 -
No image is displayed
Check the correct input mode is selected.
Check the setting of AV (COMPONENT / VIDEO) in Input Selection to
match the signal being output by the external equipment.
Watching > External equipment
Is Backlight, Contrast, Brightness or Colour in the Picture Menu set to the
minimum?
Watching > For best picture > Basic settings
Check all required cables and connections are firmly in place.
Blurry or distorted image (no sound or low volume)
Reset channels.
Watching > Tuning and editing channels > Auto Setup
There may be red, blue, green and black spots on the screen
This is a characteristic of liquid crystal panels and is not a problem. The
liquid crystal panel is built with very high precision technology giving you
fine picture details. Occasionally, a few non-active pixels may appear on
the screen as a fixed point of red, green, blue or black. Please note this
does not affect the performance of the panel.
- 316 -
Digital TV
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Block noise, frozen or disappearing image occurs / Some channels cannot be
tuned
Check the position, direction and connection of the aerial or dish.
Check Signal Condition. If the level of Signal Quality is low, the DVB
signal is weak. Connecting the aerial to the TV directly may improve signal
quality than connecting the aerial through the equipment (Set top box,
DVD, etc.).
Watching > Tuning and editing channels > Signal Condition
Watching > Basic > Basic connection
Weather conditions affect signal reception (heavy rain, snow, etc.), in
particular in poor reception areas. Even during good weather, the high
pressure can cause poor reception of some channels.
Due to the digital reception technologies involved, quality of the digital
signals may be relatively low in some cases, despite good reception of
analogue channels.
Check the network connections and settings (DVB-via-IP).
Functions > DVB-via-IP
Network > Network settings
Turn the TV off with Mains Power On / Off switch, then turn it on again.
DVB-S Auto Setup cannot be done completely
Check connections and dish alignment.
Watching > Basic > Basic connection
If the problem persists, consult your local dealer.
- 317 -
Faulty dish message appears
The satellite cable may be short-circuited or there may be connection
problems of the cable. Check the cable and connection and then turn the
TV off with Mains Power On / Off switch, and turn it on again.
If the message persists, consult a dish installer for checking the dish and
cable.
No programmes shown on TV Guide
Check the digital transmitter.
Adjust the direction of the aerial or dish to another transmitter installed
nearby.
- 318 -
Analogue TV
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
White spots or shadow image (ghosting) occurs / Some channels cannot be
tuned
Check the position, direction and connection of the aerial.
Weather conditions affect signal reception (heavy rain, snow, etc.), in
particular in poor reception areas. Even during good weather, the high
pressure can cause poor reception of some channels.
Turn the TV off with Mains Power On / Off switch, and then on again.
If the problem persists, consult your local dealer or service provider for the
availability of services.
- 319 -
Sound
Before requesting service or assistance, please follow these simple guides to
solve the problem. Also makes a diagnosis of sound problem in TV Self Test.
Support > Help menu > Using Help menu
If the problem still persists, please contact your local Panasonic dealer for
assistance.
No sound is produced
Is “Sound mute” active? Press MUTE to switch sound mute on or off.
Is the volume set to the minimum?
Check connections and setting of external equipment.
Watching > External equipment
Ensure that Speaker Selection is set to TV.
Watching > For best audio > Volume settings
Functions > VIERA Link “HDAVI Control™” > Speaker Selection
Ensure that TV Speaker Setting is set to TV Speaker.
Watching > For best audio > Volume settings
Sound level is low or sound is distorted
Sound signal reception may be poor.
Set MPX in the Sound Menu to Mono. (Analogue)
Watching > For best audio > Advanced settings
- 320 -
HDMI
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Sound is unusual
Check the setting of HDMI Audio Format in the Sound Menu to match the
audio signal from the connected equipment.
Watching > For best audio > Advanced settings
Check the HDMI Input setting in the Sound Menu.
Watching > For best audio > Advanced settings
If digital sound connection has a problem, select analogue sound
connection.
Watching > External equipment > HDMI features
Set HDMI Auto Setting in the Setup Menu to Mode1.
Watching > 4K resolution > HDMI Auto Setting
Pictures from external equipment are unusual when the equipment is
connected via HDMI
Check the HDMI cable is connected properly.
Watching > External equipment > External connection
Turn the TV and equipment off, then turn them on again.
Check an input signal from the equipment.
Watching > External equipment > Valid input signals
Use equipment compliant with EIA/CEA-861/861D.
Set HDMI Auto Setting in the Setup Menu to Mode1.
Watching > 4K resolution > HDMI Auto Setting
The valid 4K format varies depending on the HDMI terminal.
Watching > 4K resolution > Valid 4K format
- 321 -
Network
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Cannot connect to the network
Check the LAN cable or wireless LAN is connected properly.
Network > Network connections
Check the connections and settings.
Network > Network connections
Network > Network settings
Check the network equipment and network environment.
The router may not be set to issue IP address automatically. If the
network administrator prefers to allocate an IP address, set an IP address
manually.
Network > Network settings
The router may be using MAC address filtering (security setting). Confirm
the MAC Address of this TV and set the router to use it.
Network > Network settings > Network Status
If the problem persists, consult your Internet Service Provider or
telecommunications company.
Cannot select the file during DLNA operations
Is media server of the connected equipment prepared?
Network > DLNA > In-House streaming
Check applicable data format.
Network > Technical information
Check the settings of Network Link Settings.
Network > Network settings > Network Link Settings
- 322 -
Cannot operate internet content
Check the connections and settings.
Network > Network connections > Internet connection
Network > Network settings
The server or connected line may be busy now.
- 323 -
Other
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
VIERA Link function does not work and an error message appears
Check the connections.
Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link
Turn the connected equipment on and then switch the TV on.
Functions > VIERA Link “HDAVI Control™”
Parts of the TV become hot
Parts of the TV may become hot. These temperature rises do not pose
any problems in terms of performance or quality.
Overcurrent error message appears
The connected USB device may cause this error. Remove the device and
turn the TV off with Mains Power On / Off switch, then turn it on again.
Check foreign objects are not inside the USB port.
An error message appears
Follow the message’s instructions.
If the problem persists, contact your local Panasonic dealer or the
authorised service centre.
- 324 -
LED does not turn to red in Standby mode
LED turns to orange in Standby mode in the following conditions:
Recording is in progress
Timer Programming is set.
DLNA Server is set to On.
Powered On by Apps is set to On.
Home Streaming is set to Always.
TV Anywhere is set to On.
Powered On by Easy Mirroring is set to On.
When pushed with a finger, the display panel moves slightly and makes a
noise
There is a little gap around the panel to prevent damage to the panel. This
is not a malfunction.
- 325 -
Detailed information
Support information about the application, optional devices, operation, etc.
may be found on the following website.
http://panasonic.net/viera/support (English only)
- 326 -
Maintenance
Care and Cleaning
First, remove the mains plug from the mains socket.
Display panel, Cabinet, Pedestal
Regular care:
Gently wipe the surface of the display panel, cabinet, or pedestal by using
a soft cloth to remove dirt or fingerprints.
For stubborn dirt:
(1) First clean the dust from the surface.
(2) Dampen a soft cloth with clean water or diluted neutral detergent (1
part detergent to 100 parts water).
(3) Wring out the cloth firmly. (Please note, do not let liquid enter the TV
inside as it may lead to product failure.)
(4) Carefully wipe moisten and wipe away the stubborn dirt.
(5) Finally, wipe away all the moisture.
= Caution =
Do not use a hard cloth or rub the surface too hard, otherwise this may
cause scratches on the surface.
Take care not to subject the surfaces to insect repellent, solvent, thinner
or other volatile substances. This may degrade surface quality or cause
peeling of the paint.
The surface of the display panel is specially treated and may be easily
damaged. Take care not to tap or scratch the surface with your fingernail
or other hard objects.
Do not allow the cabinet and pedestal to make contact with a rubber or
PVC substance for a long time. This may degrade surface quality.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust
may lead to fire or electrical shock.
- 327 -
Licence
Licence
Even if no special notation has been made of company or product
trademarks, these trademarks have been fully respected.
DVB and the DVB logos are trademarks of the DVB Project.
DiSEqC™ is a trademark of EUTELSAT.
DLNA
®
, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC
in the United States and other countries.
x.v.Colour™ is a trademark.
HDAVI Control™ is a trademark of Panasonic Corporation.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby
Laboratories.
Speech Powered by Dragon
2002-2016 Nuance Communications, Inc. All rights reserved.
- 328 -
“PlayReady” is a trademark registered by Microsoft. Please be aware of the
following.
(a) This product contains technology subject to certain intellectual property
rights of Microsoft. Use or distribution of this technology outside of this
product is prohibited without the appropriate license(s) from Microsoft.
(b) Content owners use Microsoft PlayReady™ content access technology to
protect their intellectual property, including copyrighted content. This device
uses PlayReady technology to access PlayReady-protected content and/or
WMDRM-protected content. If the device fails to properly enforce restrictions
on content usage, content owners may require Microsoft to revoke the
device’s ability to consume PlayReady-protected content. Revocation should
not affect unprotected content or content protected by other content access
technologies.
Content owners may require you to upgrade PlayReady to access their
content.
If you decline an upgrade, you will not be able to access content that requires
the upgrade.
Firefox
®
OS is a registered trademark of the Mozilla Foundation.
This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) Firefox OS is powered by Mozilla,
(4) the software licensed under the GNU LESSER GENERAL PUBLIC
LICENSE Version 2.1 (LGPL V2.1) and/or,
(5) open sourced software other than the software licensed under the LGPL
V2.1.
About the software categorized as (3), please refer to the “About Firefox OS”
menu.
The software categorized as (4) and (5) are distributed in the hope that it will
be useful, but WITHOUT ANY WARRANTY, without even the implied warranty
of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Please refer to the detailed terms and conditions thereof shown in the
“Software License”menu on this product.
- 329 -
At least three (3) years from delivery of this product, Panasonic will give to
any third party who contacts us at the contact information provided below,
for a charge no more than our cost of physically performing source code
distribution, a complete machine-readable copy of the corresponding source
code covered under LGPL V2.1 or the other licenses with the obligation to do
so, as well as the respective copyright notice thereof.
Contact Information: cdrequest@unipf.jp
The source code and the copyright notice are also available for free in our
website below.
http://www.unipf.jp/dl/EUIDTV16/
- 330 -
v.3.400
311


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-49DXT686 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-49DXT686 in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-49DXT686

Panasonic TX-49DXT686 User Manual - English - 68 pages

Panasonic TX-49DXT686 User Manual - German - 68 pages

Panasonic TX-49DXT686 User Manual - German - 337 pages

Panasonic TX-49DXT686 User Manual - Dutch - 68 pages

Panasonic TX-49DXT686 User Manual - Dutch - 334 pages

Panasonic TX-49DXT686 User Manual - French - 68 pages

Panasonic TX-49DXT686 User Manual - Italian - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info