60812
24
Zoom out
Zoom in
Previous page
1/60
Next page
24
Ŷ Menu list
Menu Item Adjustments / Configurations (alternatives)
VIERA Link
Pause Live TV
Controls the connected equipment with VIERA Link function, and enables various
convenient recording, playback, etc. (p. 45 - 47)
You can also access VIERA Link Menu directly using the VIERA Link button on the
remote control.
Direct TV Rec
VIERA Link Control
Speaker Selection
Picture
Viewing Mode
Selects four different screen settings (Dynamic / Normal / Cinema / Eco)
Dynamic :
Provides enhanced picture contrast and sharpness when viewing in a bright room
Normal : Recommended for viewing under normal ambient room lighting conditions
Cinema : For watching movies in a darkened room producing a cinema-like picture
Eco :
Adjusts picture settings automatically dependent on ambient lighting conditions
In each Viewing Mode setting, Contrast, Brightness, Colour, Sharpness, Tint, Colour Balance,
Colour Management and 3D-COMB can be adjusted and stored to suit your particular viewing
requirement (e.g., you may require different settings for viewing sports, ¿ lms, news etc.)
Set for each input signal
Changes will be stored automatically
Contrast, Brightness,
Colour, Sharpness
Increases or decreases the levels of these options according to your personal preference
Tint
With an NTSC signal source connected to the TV, the picture hue can be adjusted to suit your taste
For NTSC signal reception only
Colour Balance
Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)
Colour Management
Automatically adjusts colours to vivid ones (Off / On)
Not valid on PC signal
P-NR
Picture Noise Reduction
Automatically reduces unwanted picture noise and À icker noise in the contoured parts of
a picture (Off / Min / Mid / Max)
Not valid on PC signal
3D-COMB
Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen
Set to “On” to display sharper and more accurate colours (Off / On)
For PAL or NTSC signal reception only
Not valid on RGB, S-Video, Component, PC, HDMI and SD Card
Reset to Default
Press the OK button to reset the present Picture Mode to the default settings
Sound
Mode
Select two different sound settings (Music / Speech)
In each Sound Mode setting, Bass and Treble can be adjusted and stored to suit your
particular sound requirement
Changes to any settings in a mode will affect all signal sources
Sound quality can be improved
Bass
Increases or decreases level to enhance or minimise lower, deeper sound output
Treble
Increases or decreases level to enhance or minimise sharper, higher sound output
Balance
Adjusts volume level of right and left speakers
Headphone Volume
Adjusts the volume of the headphones
Surround
Surround sound settings (Off / Simulated Surround / SRS TruSurround XT)
Simulated Surround: Provides a dynamic enhancer to simulate improved spatial effects
SRS TruSurround XT
: SRS TruSurround XT
®
creates a high quality surround sound effect
using just two speakers from the source which can output surround
encoded signals
Switching is also possible by the Surround button on the remote control (p. 7).
Volume Correction
Adjusts volume of individual programme or input mode
Speaker Distance
to Wall
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
If the back space between the TV and wall is over 30 cm, “Over 30cm” is recommended.
If the back space between the TV and wall is within 30 cm, “Up to 30cm” is recommended.
Preferred Multi Audio
Selects the preferred language for DVB multi audio (depending on the broadcaster)
NICAM
NICAM (Near Instantaneous Companded Audio Multiplex)
A format for digital sound over television
Reproduces stereo sound (Off / On)
Off if reception is poor (FM monaural sound)
Analogue mode only
HDMI1 / 4 Input
Select to ¿ t the input signal (Auto / Digital / Analogue) (p. 50)
Auto : Automatic detection of digital or analogue sound source
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
HDMI input mode only
HDMI2 / 3 terminals are for digital signal only
No setting for HDMI2 / 3 available
Audio
Description
Menu
Audio Description
Useful for visually-impaired viewers (Off / On)
Select “On” to activate the description sound track if available
Volume
Adjusts the volume for audio description
Speakers
Set to “On” to activate the description sound track from TV speakers (Off / On)
Headphones
Set to “On” to activate the description sound track from headphones (Off / On)
Reset to Default
Press the OK button to reset the present Sound Mode to the default settings
Effective to Bass, Treble, Balance, Headphone Volume and Surround
How to Use Menu Functions
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-37LZD800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-37LZD800 in the language / languages: English as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-37LZD800

Panasonic TX-37LZD800 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info