584136
16
Zoom out
Zoom in
Previous page
1/24
Next page
Advanced
Menu
Item Adjustments / Con gurations (options)
Picture
Advanced
PC
Settings
R-Gain Adjusts the white balance for red areas
G-Gain Adjusts the white balance for green areas
B-Gain Adjusts the white balance for blue areas
Gamma (2.0 / 2.2 / 2.5)
Setup
PC
Setup
Input
Resolution
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)
Options change depending on signals
Clock Set to the minimum level if noise occurs
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates icker and distortion
Adjust after Clock adjustment
Set to the minimum level if noise occurs
Sync
Chooses another synchronous signal if the image is distorted (H & V / On G)
H & V : by the horizontal and vertical signals from your PC
On G : by the green signal from your PC (if available)
Input Selection
AV1
AV2/AV2S
AV3/AV3S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
TV
Main Menu
VIERA Link
Picture
Sound
Setup
2/2
System Information
Time Zone Auto
VIERA Link On
Software License
Common Interface
System Update
Input Labels
Banner Display Timeout
3 seconds
Access
Setup Menu
1 of 2Input Labels
AV1 DVD
AV2/AV2S AV2/AV2S
AV3/AV3S AV3/AV3S
COMPONENT COMPONENT
PC PC
HDMI1 HDMI1
HDMI2 HDMI2
HDMI3 HDMI3
30
31
Displaying PC Screen on TV
Input Labels
To return to TV
Displaying PC Screen on TV
Select the external input
Select “PC”
2
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC
(p. 38)
Corresponding signals (p. 43)
If “H-freq.” or “V-freq.” is shown in red,
the signals may not be supported.
PC menu setting (changed as desired)
To make settings “How to Use Menu Functions” to (p. 18)
Other items p. 20 and p. 21
1
Input Labels
2
3
4
Select “Setup”
Select “Input Labels”
Display the menu
Select a input terminal and set
To return to TV
EXIT
For easier identi cation and selection of the input mode, you can label each input terminals or skip
terminal that is not connected to any equipment.
(To select the input mode
p. 14)
set
select
1
The labels you set will be displayed in “Input Selection” menu (p. 14) or banner.
If “Skip” is selected, you cannot select the mode.
access
select
access
select
access
select
User input
You can name each input terminals freely.
Select “User input”
access
select
Set characters
User input
Name
ABCDEFGH I JKLMN
UVWXYZ 0123456
abcdef ghi j k lmn
uvwxyz( )+- . *_
OPQRST
789! : #
opqr s t
set
select
(maximum: ten characters)
Store
RETURN
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-32LXD700F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-32LXD700F in the language / languages: English as an attachment in your email.

The manual is 15,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-32LXD700F

Panasonic TX-32LXD700F User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info