602935
9
Zoom out
Zoom in
Previous page
1/60
Next page
9
1
2
Connect the mains plug to the wall sock et.
Press the [
] switch on the TV set to turn the set on.
To switch the TV set to Standby mode, press the button
on the remote control.
The TV set can be switched on by pressing the
button
again if it was in Stand by mode.
Note:
This TV will still consume some power even in the Off
mode, as long as the mains plug is still connected to a
live mains socket.
IDTV
123
456
789
C0
OK
Remote control signal sensor
Power Indicator
Standby : Red
On : No Light
C.A.T.S. sensor
Plasma C.A.T.S. (Contrast Automatic Tracking
System) automatically senses the ambient light
conditions and adjusts the brightness and gradation
accordingly, to optimize contrast.
C.A.T.S. is in effect when Viewing mode is set to
Auto. See page 13.
Programmes will appear immediately if your dealer has programmed the
TV for you.
If the TV has not been programmed for you then Auto setup will begin.
The TV will search for DVB stations and Analogue stations:
TV stations will be located, sorted into order and stored ready for use.
Stations are sorted into the following order:
DVB Stations: Are sorted by their logical channel number sent by the
broadcasters, which can be made the favourites list by Pro le Edit. See
page 26.
Analogue Stations: Are sorted into channel order, but can be changed
to your preference. See page 17.
In this setup, usually Analogue auto setup screen may not be displayed.
The sorted programme order depends upon the TV signal, the broadcasting
system, and reception conditions.
TV to VCR or DVD Recorder Download
If a “Q-Link”, “NEXTVIEWLINK” or compatible recording device has
been connected to a Scart terminal (AV2 or AV4) before starting Step 1,
programme information will be downloaded to that device.
Only the analogue programme positions will be downloaded to the
recording device, in the same order as stored in the TV. See page 34.
Not all VCRs / DVD Recorders support this download of programme information, some may require to be
started manually.
Refer to the recording device’s operating instruction book.
If a recording device other than those described above has been connected, then there will be no download
operation.
Notes:
• If the recording device has not accepted download data from the TV, you may need to select the Download
option from the device’s menu system. Refer to the recording device’s operating instruction book.
If Q-Link is not operating correctly, check the following :
The Scart cable is connected to the TV’s Scart terminal, AV2 or AV4, and correctly setup in the menu.
The Scart cable is connected to the recording device’s compatible (Q-Link, NEXTVIEWLINK or similar
technology) Scart terminal.
The Scart cable is a “fully wired” type.
For further information on Q-Link and connecting equipment, see page 34, 53, 58.
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
AUTO SETUP IN PROGRESS
SEARCHING : PLEASE WAIT
21 68
CH44
Exit
Please Wait !
DVB Aute Setup
Prog. Channel Service Name NetID. TS ID. Quality
This will take about 3 mins.
Exit
4
5
6
7
8
30
30
30
30
30
12302
12302
12302
12302
12302
4158
4158
4158
4158
4158
9
9
9
9
9
BBC NEWS 24
BBCI
CBBC Channel
BBC Radio Wales
BBC Radio Cymru
68 21
DVB Indicator
Quick Start Guide
3
DVB system active during Timer recording or
standby for Direct TV Recording : Orange ( ash)
Timer recording On : Orange
Otherwise : No Light
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH42PV500B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH42PV500B in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info