602671
40
Zoom out
Zoom in
Previous page
1/48
Next page
1/2
Options
Off-timer function
INPUT lock
Studio W/B
Advanced PIP
Display size
Initial VOL level
Maximum VOL level
Initial INPUT
Onscreen display
Off
Off
Off
Off
Enable
On
Off
0
Off
Off
0
Press or button to switch between modes.
Off On
Off
Sets normal two screen display mode. (see page 20)
On
Sets Advanced PIP mode (see page 21).
Notes:
When “INPUT lock” is “On”, you cannot use all the two screen
display functions.
, buttons are unavailable during Advanced PIP mode
operation.
40
Options Adjustments
2/2
Options
Off
Off
Off
Off
Off
Off
Off
0
Slot power
V. lnstallation
Rotate
Remote ID
Serial ID
ID select
Button lock
Remocon User level
Press or button to switch between
modes.
Off On
Sets the panel ID Control.
Off
Disables external control by the ID.
On
Enables the external control by the ID.
Normalization
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote
ID” adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the button on main unit together with button on the remote control and hold for more than 5 seconds.
The “SHIPPING” menu is displayed and the lock is released when it disappears.
Press or button to switch between modes.
Off On
Adjusts the image display size on screen.
Off
Sets the normal image display size on screen.
On
Sets the image display size approximately 95 % of the normal
image display.
Off On
Notes:
• This setting is valid only when the input signals are as
follows; 525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i,
1125/50i, 1125/24sF, 1125/25p, 1125/24p, 1125/30p, 1250/50i
(Component Video, RGB, DVI, SDI, HDMI)
This setting is invalid when two screen display, digital zoom
or Multi screen is selected.
When Display size is set to “On”, Pos./Size adjustment cannot
be used.
• Refer to each board's operating instruction for DVI, SDI,
HDMI's corresponding signals.
Sets panel ID number when panel is used
in “Remote ID” or “Serial ID”.
Set value range: 0 - 100
(Standard value: 0)
Press or button to switch between modes.
Off On
Off
Disables ID remote control functions.
You can use normal remote control operations.
On
Enable ID remote control functions.
Press or button to switch between
modes.
Off On
Off
Does not rotate the image.
On
Rotates the image 180 degrees.
Press or button to switch between
modes.
Off On
Off
Sets fan to the horizontal installation
mode.
On
Sets fan to the vertical installation mode.
Notes:
This functions when display is turned
on.
This mode is available for TH-42PHD8EK/S,
TH-50PHD8EK/S.
• Vertical installation is available for
TH-42PWD8EK/S without this mode
setting.
• Turn up the power switch for the
upward direction when you set Display
vertically.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH42PHD8EK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH42PHD8EK in the language / languages: English as an attachment in your email.

The manual is 5,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TH42PHD8EK

Panasonic TH42PHD8EK User Manual - German - 48 pages

Panasonic TH42PHD8EK User Manual - Dutch - 48 pages

Panasonic TH42PHD8EK User Manual - Danish - 48 pages

Panasonic TH42PHD8EK User Manual - French - 48 pages

Panasonic TH42PHD8EK User Manual - Italian - 48 pages

Panasonic TH42PHD8EK User Manual - Swedish - 48 pages

Panasonic TH42PHD8EK User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info