602614
23
Zoom out
Zoom in
Previous page
1/55
Next page
23
Adjusting POS. /SIZE
H-Pos Adjust the horizontal position. V-Pos Adjust the vertical position.
H-Size Adjust the horizontal size. V-Size Adjust the vertical size.
Dot Clock (During Component, RGB and PC input signal)
Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens,
adjust so that any such noise is minimized.
Clock
Phase
(During Component, RGB and PC input signal)
Eliminate the ickering and distortion.
Clamp
Position
(During Component and RGB input signal)
Adjusts the clamp position when black parts of the image have no detail due to underexposure or are
tinged with green.
Optimum value for Clamp Position adjustment
When black parts have no detail due to underexposure (blackout)
Value that causes least blackout is the optimum.
When black parts are tinged with green
Value that cancels the greenishness without causing blackout is the optimum.
Over scan Turn image over scan On/Off.
Con gurable signals are as follows:
525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p, 1125/60p,
1125/50p, 1125/30p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI)
On Off
Notes:
When “Off” is set, “H-Size” and “V-Size” cannot be adjusted.
When the “Display size” is set to “On” in the Options menu, this setting will be invalid. (see page 44)
Notes:
If the dot clock frequency is 108 MHz or higher, Dot Clock and Clock Phase cannot be made.
When digital RGB signal input, Dot Clock and Clock Phase cannot be made.
Auto Setup may not work when a cropped or dark image is input. In such case, switch to a bright
image with borders and other objects are clearly shown, and then try auto setup again.
Depending on the signal, out of alignment may occur after Auto Setup. Carry out ne tuning for the
position/size as required.
If Auto Setup cannot set properly for vertical frequency 60Hz XGA signal (1024×768@60Hz,
1280×768@60Hz, and 1366×768@60Hz), pre-selecting the individual signal in “XGA Mode” (see
page 40) may results in correct Auto Setup.
Auto Setup does not work well when a signal such as additional information is superimposed out
of valid image period or intervals between synchronizing and image signals are short, or for image
signal with tri-level synchronizing signal added.
If Auto Setup cannot adjust correctly, select “Normalise” once and press ACTION (
), then adjust
Pos. /Size manually.
While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION
( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
Helpful Hint ( /
Normalise
Normalisation)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH42PH20E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH42PH20E in the language / languages: English as an attachment in your email.

The manual is 7,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TH42PH20E

Panasonic TH42PH20E User Manual - English - 20 pages

Panasonic TH42PH20E User Manual - German - 20 pages

Panasonic TH42PH20E User Manual - German - 55 pages

Panasonic TH42PH20E User Manual - German - 20 pages

Panasonic TH42PH20E User Manual - German - 55 pages

Panasonic TH42PH20E User Manual - Dutch - 55 pages

Panasonic TH42PH20E User Manual - Dutch - 20 pages

Panasonic TH42PH20E User Manual - Danish - 55 pages

Panasonic TH42PH20E User Manual - Danish - 20 pages

Panasonic TH42PH20E User Manual - French - 55 pages

Panasonic TH42PH20E User Manual - French - 20 pages

Panasonic TH42PH20E User Manual - Italian - 55 pages

Panasonic TH42PH20E User Manual - Italian - 20 pages

Panasonic TH42PH20E User Manual - Swedish - 55 pages

Panasonic TH42PH20E User Manual - Swedish - 20 pages

Panasonic TH42PH20E User Manual - Turkish - 55 pages

Panasonic TH42PH20E User Manual - Spanish - 55 pages

Panasonic TH42PH20E User Manual - Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info