602602
49
Zoom out
Zoom in
Previous page
1/71
Next page
Cinema reality
Signal
Off
H-Freq.
Dot Clock Freq.
kHz
MHz
63.98
108.0
V-Freq. Hz
60.02
Noise reduction
Off
[
Digital
]
Signal Format 1280×1024/60i
Sync
Signal
H-Freq.
V-Freq.
kHz
Hz
63.98
60.02
Signal Format
1280×1024/60i
Cinema reality
Noise reduction
XGA Mode
Auto
Off
Off
Auto
[
Component
]
Sync
Signal
H-Freq.
V-Freq.
kHz
Hz
63.98
60.02
Signal Format
1280×1024/60i
[
RGB
]
Cinema reality
Noise reduction
XGA Mode
Auto
Off
Off
Auto
1/2
Signal
3D Settings
Screensaver
Extended life settings
Input label
Off
Standby save
Off
PC Power management
Off
No activity power off
Enable
OSD Language English
(
UK
)
Component/RGB-in select
RGB
Power save
Setup
DVI-D Power management
Off
No signal power off
Disable
49
Setup for Input Signals
Signal menu
Press ACTION ( ) button
For Video (S VIDEO) For RGB
For Component
For Digital
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode.
3
4
Press to display the Setup menu.
Press to select the “Signal”.
Press to display the Signal menu.
2
1
Note:
“Signal” setup menu displays a different setting condition for each input signal.
3D Y/C Filter (NTSC)
Colour system
Signal
On
Auto
Cinema reality
Off
[
AV
]
Noise reduction
Off
• 3D Y/C Filter (NTSC)
This menu is displayed when BNC Dual Video Terminal
Board (TY-FB9BD) is installed to the unit.
Set this menu when the moving image looks unnatural
during Video (S Video) input signal.
On Off
Note:
When On, this setting only affects NTSC input signals.
• Colour system
Auto SECAM M.NTSC NTSCPAL
Set the colour system to match the input signal. When “Auto” is set, Colour system will be automatically selected
from NTSC/PAL/SECAM/M.NTSC.
To display PAL60 signal, select “Auto” or “PAL”.
If the picture image becomes unstable:
With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases
become unstable. Should this occur, set the system to match the format of the input signal.
• Cinema reality
When “On”, the display attempts to reproduce a more natural interpretation of sources such as movie pictures,
which are recorded at 24 frames per second.
If the picture is not stable, turn the setting to “Off”.
On Off
Note:
When On, this setting only affects the following signal input:
NTSC / PAL signal input during Video (S Video) input signal.
525i(480i), 625i(575i), 1125(1080)/60i signal input during “Component” input signal.
• XGA Mode
This menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA
signals with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz,
1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
Auto 1024×768 1280×768 1366×768
Auto: Automatically selected from 1024×768/1280×768/1366×768.
Switch the setting to suit the input signal for better display depends on the angle of view or display
resolution condition.
Note:
After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos./Size” menu as
necessary. (see page 25)
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH42PF30ER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH42PF30ER in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TH42PF30ER

Panasonic TH42PF30ER User Manual - English - 20 pages

Panasonic TH42PF30ER User Manual - English - 71 pages

Panasonic TH42PF30ER User Manual - German - 71 pages

Panasonic TH42PF30ER User Manual - German - 20 pages

Panasonic TH42PF30ER User Manual - Dutch - 71 pages

Panasonic TH42PF30ER User Manual - Dutch - 20 pages

Panasonic TH42PF30ER User Manual - Danish - 71 pages

Panasonic TH42PF30ER User Manual - Danish - 20 pages

Panasonic TH42PF30ER User Manual - French - 71 pages

Panasonic TH42PF30ER User Manual - French - 20 pages

Panasonic TH42PF30ER User Manual - Italian - 71 pages

Panasonic TH42PF30ER User Manual - Italian - 20 pages

Panasonic TH42PF30ER User Manual - Swedish - 71 pages

Panasonic TH42PF30ER User Manual - Swedish - 20 pages

Panasonic TH42PF30ER User Manual - Turkish - 72 pages

Panasonic TH42PF30ER User Manual - Spanish - 71 pages

Panasonic TH42PF30ER User Manual - Spanish - 20 pages

Panasonic TH42PF30ER User Manual - Norwegian - 20 pages

Panasonic TH42PF30ER User Manual - Finnish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info