602565
20
Zoom out
Zoom in
Previous page
1/44
Next page
20
Q-Link
Q-Link allows the television to communicate with a compatible VCR or DVD Recorder.
For Q-Link communication to work, the TV must be connected to a recording device with the Q-Link, NEXTVIEWLINK,
DATA LOGIC, Easy Link, Megalogic or SMARTLINK logo using a fully wired Scart cable between the AV2 /
AV4 terminal of the television and the appropriate terminal on your VCR or DVD Recorder.
For connection to the appropriate Scart terminal on the recording device, refer to the devices instruction book.
When using a NEXTVIEWLINK device the main features possible are the following :
Preset Download
This allows the programme order from the TV to be downloaded to the recording device, helping to ensure that correct
recordings are made; there are several ways to perform this operation :
1. During installation as explained in the Quick Start Guide on page 8, 9.
2. When Auto setup is started from within the Tuning menu. See page 15.
3. Preset download started from the recording device, refer to the devices instruction book.
Important Note:
Not all recording devices support this type of data communication system. Some may support certain features, but not
others. Refer to the recording devices instruction book.
If Q-Link is inoperative, first confirm that your Scart cable is a fully wired type. Ask your dealer for further details.
The recording device is recording the programme signal
from its own tuner. If you wish you can switch off the TV
and leave the device recording in the normal way.
The tape or disc may have been write protected, missing
or may be damaged. The device may already be
recording.
Refer to the devices instruction book.
Additionally, when using a Q-Link device the main features possible are the following :
The following features are only available from the device connected to the Scart terminal selected using Q-Link. See
page 14.
TV / Recording device Auto Power On
If you insert pre-recorded media into the recording device and press the Play button whilst the TV is in Standby mode,
the TV will automatically switch on and select the correct AV input so that you can view the content.
Recording device Auto Power Standby
When the TV is switched into Standby mode, the recording device will also switch into Standby mode if there is no
media inserted, or if there is media inserted and the device is in Rewind or Stop mode. If a VCR is rewinding a tape,
it will not switch into Standby mode until rewinding has finished.
Recording device Image View On
If the TV is in Standby mode and the recording device sends a menu to be displayed on the TV screen (e.g., Main
menu), the TV will automatically switch On and the menu will be displayed.
Some other devices may support this feature. Refer to the devices instruction book.
This TV will also communicate with other recording devices that bear the following logos :
DATA LOGIC (a trademark of Metz Corporation) Megalogic (a trademark of Grundig Corporation)
Easy Link (a trademark of Philips Corporation) SMARTLINK (a trademark of Sony Corporation)
Important Note:
These recording devices may support some or all of the above functions.
Not all recording devices support this type of data communication system. Somemay support certain features, but not
others. Refer to the devices instruction book. Some features are only available from the device connected to the Scart
terminal selected using Q-Link. See page 14.
If Q-Link is inoperative, first confirm that your Scart cable is a fully wired type. Ask your dealer for further details.
What You See Is What You Record (DIRECT TV RECORDING)
This will allow the immediate recording of the programme currently shown on the TV, by the recording
device attached to the Scart terminal, which can be chosen using Q-Link. See page 14.
Press the DIRECT TV REC button.
DIRECT TV REC
If the recording device is in Standby mode with usable recording media inserted, it will automatically
switch on when you press the DIRECT TV REC button.
If a Q-Link device is connected, a message will appear on the TV screen showing what is being
recorded, or if it is not possible to record. Some Q-Link compatible devices will only display the message
when on the VCR programme position(0) or in AV mode. Refer to the devices instruction book.
TV
123
456
789
C
0
N
Recording in progress No recording -Check tape or disc
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH42PA30E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH42PA30E in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TH42PA30E

Panasonic TH42PA30E User Manual - German - 44 pages

Panasonic TH42PA30E User Manual - Dutch - 44 pages

Panasonic TH42PA30E User Manual - Danish - 44 pages

Panasonic TH42PA30E User Manual - French - 44 pages

Panasonic TH42PA30E User Manual - Italian - 44 pages

Panasonic TH42PA30E User Manual - Swedish - 44 pages

Panasonic TH42PA30E User Manual - Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info