602361
31
Zoom out
Zoom in
Previous page
1/52
Next page
31
Q-Link
Q-Link allows the television to communicate with a compatible VCR or DVD Recorder.
For Q-Link communication to work, the TV must be connected to a recording device with the Q-Link, NEXTVIEWLINK,
DATA LOGIC, Easy Link, Megalogic or SMARTLINK logo using a fully wired Scart cable between the AV2 / AV4
terminal of the television and the appropriate terminal on your VCR or DVD Recorder.
For connection to the appropriate Scart terminal on the recording device, refer to the devices instruction book.
When using a NEXTVIEWLINK device the main features possible are the following :
Preset Download
This allows the programme order from the TV to be downloaded to the recording device, helping to ensure that correct
recordings are made; there are several ways to perform this operation :
1. During installation as explained in the Quick Start Guide on page 8-10.
2. When Auto setup is started from within the Tuning menu. See page 16.
3. Preset download started from the recording device, refer to the devices instruction book.
Because a recording device cannot tune to DVB stations, only the analogue programme positions are downloaded to the
device.
The recording device is recording the programme signal
from its own tuner. If you wish you can switch off the TV and
leave the device recording in the normal way.
The tape or disc may have been write protected, missing
or may be damaged. The device may already be recording.
Refer to the devices instruction book.
Recording DVB stations
If you press the DIRECT TV REC button while watching a DVB station, the recording device will automatically switch to its
AV input to record the DVB signal from the TV (via the SCART cable), and the DVB programme position will be locked. If you
attempt to select another DVB programme position while recording, you will see the message DVB programme is locked.
Press the OK button to clear the message, or the EXIT button to unlock the programme. Beware that if you press EXIT, the
DVB programme will be unlocked switching to another DVB programme will spoil your intended recording. Stop the
recording manually.
Additionally, when using a Q-Link device the main features possible are the following :
The following features are only available from the device connected to the Scart terminal selected using Q-Link. See page 15.
TV / Recording device Auto Power On
If you insert pre-recorded media into the recording device and press the Play button whilst the TV is in Standby mode, the
TV will automatically switch on and select the correct AV input so that you can view the content.
Recording device Auto Power Standby
When the TV is switched into Standby mode, the recording device will also switch into Standby mode if there is no media
inserted, or if there is media inserted and the device is in Rewind or Stop mode. If a VCR is rewinding a tape, it will not switch
into Standby mode until rewinding has finished.
Recording device Image View On
If the TV is in Standby mode and the recording device sends a menu to be displayed on the TV screen (e.g., Main menu), the
TV will automatically switch On and the menu will be displayed.
This TV will also communicate with other recording devices that bear the following logos :
DATA LOGIC (a trademark of Metz Corporation) Megalogic (a trademark of Grundig Corporation)
Easy Link (a trademark of Philips Corporation) SMARTLINK (a trademark of Sony Corporation)
Important Note:
Some recording devices may not support all or some of the above functions. Refer to the instruction book for the device.
If Q-Link functions do not work, check the connection and ensure that the scart lead is a fully-wired type.
What You See Is What You Record (DIRECT TV RECORDING)
This will allow the immediate recording of the programme currently shown on the TV, by the recording device
attached to the Scart terminal, which can be chosen using Q-Link. See page 15.
Press the DIRECT TV REC button.
DIRECT TV REC
If the recording device is in Standby mode with usable recording media inserted, it will automatically switch
on when you press the DIRECT TV REC button.
If a Q-Link device is connected, a message will appear on the TV screen showing what is being recorded,
or if it is not possible to record. Some Q-Link compatible devices will only display the message when on the
VCR programme position(0) or in AV mode. Refer to the devices instruction book.
123
456
789
C
0
N
IDTV
Recording in progress No recording -Check tape or disc
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH37PE30B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH37PE30B in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info