602361
28
Zoom out
Zoom in
Previous page
1/52
Next page
28
Notes:
To delete a timer programme, select the recording with the cursor bar and
press the Red button.
To edit a previously entered timer programme, select it with the cursor bar
and press the OK button.
Timer programmes can also be entered from the TV Guide. See page 30.
During DVB mode
Press the MENU button.
Move to choose Setup menu.
Access Setup menu.
Move to choose DVB Timer programming.
Access DVB Timer programming.
Press the OK button to begin programming.
Select the Programme position to be recorded.
Move to the Date field.
Set the Date on which recording is to take place.
DVB Timer programming menu
For an external recording device to record DVB programmes, the integrated DVB system must be active to provide
the signal. The Timer programming menu allows you to choose programmes that you wish to record. At the correct
time, the DVB system will switch on and tune to the correct station (even if the TV is in standby mode). If the recording
device is compatible with Q-Link or similar technologies (see page 31) and connected to the TVs AV2 / AV4 terminal,
you do not need to program the device the DVB system will control the recording process.
The device must be connected to the TVs AV2 / AV4 terminal using a SCART cable to record DVB programmes.
The current Date and Time are shown at the top of the menu.
See page 29 for further Date options.
Move to the Start time field
and set the Start time .
Move to the End time field and set the End time .
The duration of the recording is shown in the Min. column.
The channel position, start and end times can also be input using
the numeric keys on the remote control.
Move to the Subtitles field.
If you wish to record subtitles (if available) select Auto.
Press the OK button to store.
Press the EXIT button to leave the DVB Timer Programming screen.
DVB
Timer programming
DVB Tuner lock
DVB System Setup
AV2 out
Setup menu
Access
Off
AV2
Q-Link
Off
Shipping condition
Off
New Service Message
Monitor
TV
Off
High
DVB Auto Setup
Child lock
Power on preference
Power save
Side panel
Off timer
Off
Two minutes before the recording is due to start, a reminder will appear on screen:
Notes:
Thirty seconds before the recording is due to start the DVB system will tune to the correct station. If you were already watching another
DVB station you will see the station change on screen. If you were watching an analogue channel, you will not see the change.
You can continue to watch analogue stations while a timer recording is in progress.
If you attempt to switch to another DVB programme position while a timer recording is in progress the message DVB prog. is
locked for recording will be displayed. Press the OK button to continue recording, or EXIT to unlock the programme position.
Beware that if you press EXIT, timer programming for this DVB position will be immediately deleted.
To immediately cancel a recording that is already in progress, press GUIDE then EXIT.
Main menu
Picture menu
Setup menu
Sound menu
IDTV
OK
123
456
789
C
0
N
MODE
Delete
Delete
BBC ONE 20/02
--/--
--/--
--/--
--/--
--/--
--/--
--/--
12:00
--:--
--:--
--:--
--:--
--:--
--:--
--:--
12:30
--:--
--:--
--:--
--:--
--:--
--:--
--:--
30
----
----
----
----
----
----
----
Off
---
---
---
---
---
---
---
Pos. Name
1
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
Date
Date 20/02/03
Time 12:01
Start End min.
DVB Timer Programming
--/--
--/--
--/--
--/--
--/--
--/--
--/--
--/--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
----
----
----
----
----
----
----
----
---
---
---
---
---
---
---
---
Pos. Name
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
Date
Date 20/02/03
Time 12:01
Start End min.
DVB Timer Programming
MENU
OK
OK
OK
VCR
123
456
789
0
EXIT
Press the OK button to remove the reminder from the screen.
If you wish to cancel the recording, press the EXIT button.
Note:
The above 2 operations will not be necessary if the TV set is in standby mode.
EXIT
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH37PE30B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH37PE30B in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info