602349
21
Zoom out
Zoom in
Previous page
1/44
Next page
21
Tuning Channels
Manual Tune
MANUAL TUNE
Press to select the MANUAL TUNE.
Press to access to the MANUAL TUNE.
Before Manual Tune, Channel Select and Regional System must already be set (see page 18).
SOUND SYS
Press to display the SETUP MENU.
Proceed to the TUNING MENU, and then to the SOUND SYS (see page 16, 17).
Search Start.
Press to select the desired Programme Number.
Press to select the higher or lower channel.
When a station
is found.
When the desired station is found, press to store.
The tuning position is memorized.
Press to exit from the TUNING MENU.
This returns the set to the normal viewing condition.
Adjust the Sound System (rsee page 20 step 2 to 3).
(1) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the
“Colour System Selection” operation on page 24.
(2)
(3) When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as
indicated in the instruction manual of VCR and to set the designated channel to programme No. “0”. In that case,
perform manual tune after setting the colour system and sound system in advance. Further, in multi-system VCR,
it is more convenient to set the designated channel to several programme Numbers.
After the Manual tune or the Automatic tune is finished, under the normal viewing condition
press this button to confirm the tuning condition for each Programme Number. If some Programme
Numbers are unused (no TV stations), it is possible to skip such Programme Numbers. Please
refer to the Programme Number Skip operation on page 23.
SET UP
CH 12
29
MANUAL TUNE
PROGRAMME
-
/+
SEARCH
-
/+
RETURN
TV
/
AV
-
EXIT
‘STR’ BUTTON-STORE
STR
TV/AV
1
2
3
Helpful Hint
FINE TUNE
COLOUR SYS
CH SELECT
SYS SELECT
AUTO TUNE
MANUAL TUNE
SOUND SYS
TUNING MENU
6. 0 MHz
AUTO
SKIP
OFF
POSITION
ACCESS
HK / UK
Manual Tune (via front panel)
S VIDEO
R - STANDBY
G - POWER ON
STR F TV/AV
AV3
VIDEO L R/ /
STR F TV/AV/ /
It is also possible to use the control panel buttons on the front of the TV to tune individual programme positions.
1 Press
F
(Front panel) until TUNING MODE is reached.
2 Press
/
or
/
to access TUNING MODE.
3 Press
TV/AV
to move between Change programme, Search and Change TV system.
4 Press
/
or
/
to change programme position or start search.
When the desired station is found, press
STR
to store.
The programme position will flash.
Repeat above procedure to tune additional programme positions.
Press
F
at any time to exit the TUNING MENU.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH37PA20H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH37PA20H in the language / languages: English, German as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info