602347
47
Zoom out
Zoom in
Previous page
1/52
Next page
47
signal name
horizontal vertical
PC
frequency(kHz) frequency(Hz)
1 640 × 400 @70 Hz 31.47 70.00
2 640 × 480 @60 Hz 31.47 59.94
3 Macintosh13 (640 × 480) 35.00 66.67
4 640 × 480 @75 Hz 37.50 75.00
5 852 × 480 @60 Hz 31.50 60.00
6 800 × 600 @60 Hz 37.88 60.32
7 800 × 600 @75 Hz 46.88 75.00
8 800 × 600 @85 Hz 53.67 85.06
9 Macintosh16 (832 × 624) 49.73 74.55
10 1,024 × 768 @60 Hz 48.36 60.00
11 1,024 × 768 @70 Hz 56.48 70.07
12 1,024 × 768 @75 Hz 60.02 75.03
13 1,024 × 768 @85 Hz 68.68 85.00
14 Macintosh21 (1,152 × 870) 68.68 75.06
15 1,280 × 1,024 @60 Hz 63.98 60.02
16 1,280 × 1,024 @75 Hz 79.98 75.03
17 1,280 × 1,024 @85 Hz 91.15 85.02
18 1,600 × 1,200 @60 Hz 75.00 60.00
Connections
PC Input Terminals connection
Notes:
(1) Computer signals which
can be input are those with
a horizontal scanning
frequency of 15 to 110 kHz
and vertical scanning
frequency of 48 to 120 Hz.
(However, the image will not
be displayed properly if the
signals exceed 1,200 lines.)
(2) The display resolution is a maximum of 640 × 480 dots when the aspect mode is set to 4:3, and 852 × 480 dots
when the aspect mode is set to 16:9. If the display resolution exceeds these maximums, it may not be possible
to show fine detail with sufficient clarity.
(3) The PC input terminals are DDC1/2B-compatible. If the computer being connected is not DDC1/2B-compatible,
you will need to make setting changes to the computer at the time of connection.
(4) Some PC models cannot be connected to the set.
(5) There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminal.
(6) The computer shown in the illustration is for example purposes only.
(7) Additional equipment and cables shown are not supplied with this set.
(8) Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified
frequency range.
(9) Component Input is possible with the pin 1, 2, 3 of the D-sub 15P Connector.
Signal Names for D-sub 15P Connector
S VIDEO
R - STANDBY
G - POWER ON
STR F TV/AV
AV3
VIDEO L R/ /
S VIDEO
AV3
VIDEO L R
COMPUTER
Conversion adapter
(if necessary)
RGB
D-sub 15p
PC cable
Ferrite core (large size)
(supplied)
Less than
4" (10 cm)
Less than
4" (10 cm)
Applicable input signals for PC Input
(D-sub 15P) (
Mark)
Input signal that can be displayed
Pin No.
1
2
3
4
5
Pin No.
6
7
8
9
10
Pin No.
11
12
13
14
15
Signal Name
R (PR/CR)
G (Y)
B (PB/CB)
NC
GND (Ground)
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Signal Name
NC (not connected)
NC
HD/SYNC
VD
NC
Pin Layout for PC Input Terminal
1
678
3
9
45
10
15 14 13 12 11
2
Note: Signals without above specification
may not be displayed properly.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH37PA20B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH37PA20B in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info