602347
26
Zoom out
Zoom in
Previous page
1/52
Next page
26
Aspect Controls
Press the ASPECT
ASPECT
to move through the seven aspect options: Panasonic Auto, 16:9, 14:9, 4:3, Zoom1,
Zoom2 and Zoom3.
Notes:
If, in Panasonic Auto mode, you experience problems with the screen
display size when playing back widescreen format recordings from your
VCR then it is possible that the tracking control on your VCR requires
adjustment (your VCR instruction book will contain adjustment details).
The widescreen aspect ratios of different films and programmes can vary.
If these are wider than a standard 16:9 aspect picture then a black band
may be visible at the top and bottom of the screen.
Panasonic Auto
Panasonic Auto determines the best aspect ratio to display the picture
you are viewing. It does this using a four step process to determine if the
picture being viewed is a widescreen picture.
If Panasonic Auto detects a widescreen signal it switches into the
appropriate widescreen mode. The Panorama (Just) mode is selected if a
signal with wide aspect ratio is not present (the screen cannot be switched
from Panorama mode into 4:3 mode).
The text shown on the screen indicates how Panasonic Auto determined
which ratio to use:
When in Panasonic Auto mode, if a Letter box signal is input and there is no
Aspect information, the picture is automatically adjusted to Just, Zoom1 or
Zoom3.
Panasonic Auto
Panasonic Auto
WIDE
Panasonic Auto
WIDE appears in the top left
of the screen, Panasonic Auto
switches to the appropriate
16:9 or 14:9 widescreen ratio.
Panasonic Auto appears in the
top left of the screen. The best
ratio is chosen and the picture
expanded to fill the screen.
Notes:
If you leave Aspect set to Panasonic Auto, this set software determines the best ratio for each programme viewed.
In order not to disrupt your viewing, no mode information is displayed while this is happening.
Simply press the ASPECT button to display mode information in the top left of the screen.
The screen modes (16:9/14:9/4:3/Zoom1/Zoom2/Zoom3) are selectable manually.
During Aspect change, the displayed picture will momentarily disappear. This is not a malfunction.
The on screen selector buttons (corresponding to the two coloured buttons on
the remote control) will appear for some Aspect functions and disappear after a
few seconds, if youd like to select an operation when the buttons are not shown,
press the ASPECT
ASPECT
button once more and the buttons will reappear.
16 : 9
<< >>
WIDE appears in the top left of the screen if a widescreen identification signal (WSS) is found or a signal is found
through a Scart socket.
Panasonic Auto switches to the appropriate 16:9 or 14:9 widescreen ratio.
Panasonic Auto appears in the top left of the screen if black stripes above and below the picture are detected.
Panasonic Auto chooses the best ratio and expands the picture to fill the screen. This process can take several
minutes, depending on how dark the picture is.
Screen mode
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH37PA20B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH37PA20B in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info