602347
13
Zoom out
Zoom in
Previous page
1/52
Next page
13
Quick start Guide
Notes:
If the recording device has not accepted download data from the TV, you may need to select the Download option from
the devices menu system.
Refer to the recording devices operating instruction book.
If Q-Link is not operating correctly, check the following:
The Scart cable is connected to the TVs correct Scart socket.
The Scart cable is connected to the VCRs compatible (Q-Link, NEXTVIEWLINK or similar technology) Scart socket.
The Scart cable is a fully wired type.
For further information on Q-Link and connecting equipment, see pages 18 and 45.
The sorted programme order depends upon the TV signal, the broadcasting system, and reception conditions.
If the order is not to your preference it can be rearranged. Refer to the Programme edit menu - see page 17 for details.
If you have a digital satellite receiver, you can start Auto setup with the receiver set to any channel. You will then have to
manually name the SAT position after Auto setup is complete. Refer to the Programme edit - see page 38 for details.
Prog. Position All channels No CH5
No CH5/S4C No CH4/CH5
No S4C No CH4/S4C No CH4/S4C/CH5
1 BBC1 BBC1 BBC1 BBC1 BBC1 BBC1 BBC1
2 BBC2 BBC2 BBC2 BBC2 BBC2 BBC2 BBC2
3 ITV ITV ITV ITV ITV ITV ITV
4 CH4 CH4 CH4 S4C CH4 CH5 SAT
5 S4C S4C SAT SAT CH5 SAT
6 CH5 SAT ∗∗SAT
7SAT∗∗∗∗∗
Note:
The next available channel will appear, If no other stations are available then the Programme position will remain nunsed.
TV/AV : To exit
21 68
AUTO SETUP IN PROGRESS
SEARCHING:PLEASE WAIT
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 11
Remote control unavailable
First, ensure that the recording device is in Standby mode,
if it has Q-Link function and Satellite receiver is switched
ON.
Plug in TV and switch on.
Programmes will appear immediately if your dealer has programmed the TV for
you.
If the TV has not been programmed for you then Auto setup will begin,your
stations will be located,sorted into order and stored ready for use.
TV to VCR /DVD recorder download
If a Q-Link, NEXTVIEWLINK or compatible recording device has been connected
to the correct Scart socket before starting Step 1 , programme information will
be downloaded to the device via Q-Link.
Downloaded tuning data will match the televisions.
Not all recording devices support this download of programme information, some
may require to be started manually. Refer to the devices operating instruction book.
lf a recording device other than those described above has been connected,
then there will be no download operation.
Auto setup
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH37PA20B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH37PA20B in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info