63115
63
Zoom out
Zoom in
Previous page
1/68
Next page
63
FAQs, etc.
Frequently Asked Questions
Problem Actions
Chaotic image, noisy
Set “P-NR” in the Picture Menu (to remove noise). (p. 28)
Check nearby electrical products
(car, motorcycle, uorescent lamp).
No image can be displayed
Is “Colour” or “Contrast” in the Picture Menu set to the minimum?
(p. 28)
Blurry or distorted image
(no sound or low volume)
Reset programmes. (p. 34 and p. 39)
Unusual image is displayed
Turn off the TV with Mains power On / Off switch, then turn it On
again.
No sound is produced
Is “Sound mute” active? (p. 9)
Is the volume set to the minimum?
Sound level is low
or sound is distorted
Sound signal reception may be deteriorated.
Set “NICAM” (p. 29) in the Sound Menu to “Off”.
(Analogue only)
Whirring sound is heard
The sound is from built-in cooling fan
(not a sign of faulty operation).
Due to the digital reception technologies involved, quality of the digital signals may be relatively low in
some cases, despite good reception of analogue programmes.
Interference or
frozen / disappearing
image in freesat, DVB or
Other Sat. mode
The quality of image and sound may be poor due to weather
conditions (heavy rain, snow etc.).
Check “Signal Condition” (p. 35 and p. 37) or “DVB Signal
Condition” (p. 39).
If “Signal Quality” or “Signal Strength” are displayed in red, check
aerial or dish.
If problem persists, consult your local Panasonic dealer.
Turn the TV off with the Mains power On / Off switch, then turn it
On again.
Some programmes
cannot be tuned
Check the aerial or dish.
Cannot find a programme
you have previously watched
The programme may broadcast for part of the day.
Check the programme in TV Guide. (p. 18 and p. 19)
Programme numbers may be changed by broadcasters.
In freesat mode, not possible
to adjust the volume and set
Speakers / Headphones for
Audio Description sound track
(unlike DVB)
This is due to broadcast limitations. (p. 29)
Sound is unusual
Set the sound setting of the connected equipment to
“2ch L.PCM”.
Check the “HDMI1 / 3 Input” setting in the Sound Menu. (p. 29)
If digital sound connection has a problem, select analogue sound
connection. (p. 58)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
Is the HDMI cable connected properly? (p. 56)
Turn Off the TV and equipment, then turn them On again.
Check an input signal from the equipment. (p. 61)
Use an equipment compliant with EIA/CEA-861/861B.
TV goes into
“Standby mode”
Off Timer function is activated.
The TV enters “Standby mode” about 30 mins. after analogue
broadcasting ends.
The remote control
does not work
Are the batteries installed correctly? (p. 6)
Has the TV been switched On?
An error message appears
Follow the message’s instructions.
If the problem persists, contact the authorized Service Centre.
Screen Sound Digital Service HDMI Other
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH-50PZ81 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH-50PZ81 in the language / languages: English as an attachment in your email.

The manual is 24,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info