64912
35
Zoom out
Zoom in
Previous page
1/68
Next page
35
Advanced
Advanced Settings
(freesat)
Connect
to the
Broadband
network
Network
Setup
Satellite Signal Condition
Satellite Programme 101 BBC 1 Scotland
Signal Quality
Signal Strength
0
0
Network ID
Transport Stream ID
Satellite Lock Indicator
003B
07FF
10
Not Locked
10
Selects a programme and checks the freesat signal condition.
To change the programme
A good Signal Strength is not an indication of
suitable signal for freesat reception. Please
use the Signal Quality indicator as follows:
Signal Quality:
Green bar Good
Yellow bar Poor
Red bar Bad (Check the Satellite dish)
Check
freesat
signal
Signal
Condition
Sets the network settings for future applications from broadcasters to enable greater
interactivity and added features for freesat services.
To connect to your network p. 56 and p. 60
Connect to network
Performs automatic testing of the network connection for the TV.
Set the network setting items see below
Select “Connect to network” and access to test
It takes a while to test.
access
select
Connected
The test is successful and the network settings become effective.
Not connected
Check the settings and connections, and then perform this function again.
Acquire IP address
Acquire DNS address
Sets IP address, Subnet mask, Gateway, Primary DNS and Secondary DNS.
For most users, the recommended method of connection to your network is by using Auto feature.
Select “Acquire IP address” and then set to “Auto”
Select “Acquire DNS address” and then set to “Auto”
The available settings are displayed automatically.
set
select
Manual settings
If you wish to set these functions manually, select “Manual”.
Select “IP address”, “Subnet
mask”, “Gateway”, “Primary DNS”
or “Secondary DNS”
Move the cursor and enter the
number
select
move
Proxy
Sets Proxy address.
This is the address of the relay server that is connected to the target server instead
of the browser and sends data to the browser. Setting is required if speci ed by the
provider.
Select “Proxy” Enter the address
access
select
Proxy
Host http://
ABCDEFGH I JKLMN
UVWXYZ 0123456
abcde f gh i j k lmn
uvwxyz( )+- .*_
OPQRST
789 ! :#
opqr s t
Set characters Store
set
select
RETURN
Proxy port
Sets Proxy port number.
This number is also speci ed by the provider with the Proxy address.
Select “Proxy port” Move the cursor and enter the number
select
move
Speed mode (Auto / 10base half / 10base duplex / 100base half / 100base duplex)
Sets the LAN speed setting.
Set to “Auto” normally.
If “Connect to network” test fails, try the other speed modes.
Select “Speed mode” and then set the speed mode
set
select
MAC address
MAC address is a unique address that identi es hardware in the network. (for information only)
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH-46PZ81 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH-46PZ81 in the language / languages: English as an attachment in your email.

The manual is 24,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info