61872
64
Zoom out
Zoom in
Previous page
1/68
Next page
64
On screen messages
Message Meaning / Action
All tuning data will be erased
“Shipping Condition” will erase all tuning data (p. 42).
Are you sure ?
Con rm correct operation.
Are you sure you want to delete this timer ?
Press OK to delete timer
Press RETURN to return
Con rm correct operation.
Bad Signal
The signal is weak. Check the aerial.
Child Lock is active !
Press OK to enter PIN
The selected programme is locked in Child Lock (p. 41).
Ethernet cable not connected
Check the connection of the LAN cable. If you use a hub, also check the
light on the hub is lit.
Faulty dish
The satellite cable might be short-circuited or there might be connection
problems of the cable. Please check the cable and connection and then
turn the TV Off with the Mains power On / Off switch, and turn it On again.
Feature not available
It is not possible to record these sources (COMPONENT / HDMI / PC).
Gateway does not answer.
Please con rm connection and setting of router.
A connection failure has occurred and the gateway is not responding.
Check the settings and connections of the router.
Invalid operation - Please check settings
and connections
Check the Q-Link or VIERA Link connection and setting (p. 50 - 52).
Invalid system time. Please exit !
Cannot get the time information. Check the connection of the RF cable.
IP address con ict
Duplicate IP address has been detected. Check the IP address of other
equipment such as computers, routers and ensure that there are no
duplicate IP address.
IP address not set
Please enter an IP address.
Key not available
You cannot select the same input source between Main and Sub screen
when you are viewing in multi window. (p. 17)
Manual IP setting not correct
The system is unable to set the IP address. Please consult your Internet
Service Provider or telecommunications company.
Max. number of Timers already set !
The maximum number of timer programming events is 15.
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to Ignore.
Selecting Auto Setup will delete
current Pro le and Childlock settings
There is a new DVB service or programme.
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to Ignore
There is a new software available.
No DVB Service found
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
No module inserted
Check the CI module inserted completely (p. 36).
No Recording - Check media
The tape or disc may be “write protected”, missing or damaged.
No Recording - Already recording
The equipment may already be recording.
No Recording - Unknown reason
The recording may not be performed. Check the equipment.
Disc or tape may be full.
No Service
The broadcaster has stopped the service.
No Signal
Check the connection of the RF cable.
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH-42PZ81 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH-42PZ81 in the language / languages: English as an attachment in your email.

The manual is 24,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info