734769
17
Zoom out
Zoom in
Previous page
1/36
Next page
32 33
What to do when...
O If the suggestions on P.30 to 31 do not bring about any
improvement, you can change the settings.
O After the setting is completed, the display returns to the
current time.
O Steps 2, 3 and 4 must each be completed within 16 seconds.
When no operation is performed for 16 seconds, the display
returns to the current time. (Setting cannot be made.)
Please restart the procedure.
O To go back to the previous setting, follow the procedure again.
To increase the keep warm
temperature. (60 to 74)
1
Press
Press and select “Quick”
Flashing
O Select “Quick” under “White
Rice”.
2
Press
You will not hear
a beep.
Press
You will not hear
a beep.
Press
3
Press
4
Press
Set to
“74”.
Pressing the button cycles through
the temperatures (order of 74, 76,
72, 60, 74).
After 4 seconds
(
Setting ends
)
automatically.
O Do not use the keep warm function
more than 12 hours.
O If an odour is generated after the
change, set to “76. If the rice is
discoloured or dry, set to “72.
O The default setting is “60.
O ECONAVI will not operate after the
change.
If you find the sound of
the pump distracting during
the keep warm state. (P.15)
1
Press
Press and select “Quick”
Flashing
O Select “Quick” under “White
Rice”.
2
Press
You will not hear
a beep.
Press
You will not hear
a beep.
Press
3
Press
Select
“04”.
Press
4
Press
Delete
“Steam”.
After 4 seconds
(
Setting ends
)
automatically.
O After the change, no steam will be
used during the keep warm state.
O The sound of the pump will still be
heard during cooking and reheating.
To stop the buzzer sounding
(end sound) during cooking,
reheating and cleaning.
1
Press
Press and select “Quick”
Flashing
O Select “Quick” under “White
Rice”.
2
Press and hold down
(for approximately 5 seconds)
O This change does not switch off the
button sounds.
If burning is
a concern.
1
Press
Press and select “Quick”
Flashing
O Select “Quick” under “White
Rice”.
2
Press
You will not hear
a beep.
Press
You will not hear
a beep.
Press
3
Press
Select
“02”.
Press
4
Press
Set to
“So:Lo”.
After 4 seconds
(
Setting ends
)
automatically.
If sound of the fan
(in the Outer Lid) is a
concern.
1
Press
Press and select “Quick”
Flashing
O Select “Quick” under “White
Rice”.
2
Press
You will not hear
a beep.
Press
You will not hear
a beep.
Press
3
Press
Select
“05.
Press
4
Press
Set to
“FA:Lo.
After 4 seconds
(
Setting ends
)
automatically.
O After the change, the temperature of
steam exiting from the Exhaust Unit
will increase.
What to do when...
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SR-SAT102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SR-SAT102 in the language / languages: English as an attachment in your email.

The manual is 4,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info