2
Discontinue use if you experience discomfort with the earphones or any other parts that directly
contact your skin. Continued use may cause rashes or other allergic reactions.
wBatteries
pDo not peel off the covering on the batteries and do not use if the covering has been peeled
off.
pAlign the poles T and U correctly when inserting the bat
p
Do not mix different types of batteries or old and new batteries.
p
Remove the batteries if you do not intend to use the unit for a long time.
p
Do not throw into a fire, short-circuit, disassemble, or subject to excessive heat.
p
Do not attempt to recharge dry cell batteries.
p
When carrying batteries in a pocket or bag, ensure no metal objects such as necklaces are
placed together with them. Contact with metal may cause short-circuiting which can cause a
fire.
wCDs
p
Do not use irregularly shaped CDs.
p
Do not use non-specification CDs.
p
Do not use CDs printed with label printers available on the market.
p
Do not use CDs with labels and stickers that are coming off or with adhesive exuding from
under labels and stickers.
wListening Caution
Do not play your headphones or earphones at a high volume. Hearing experts advise against
continuous extended play
If you experience a ringing in your ears, reduce volume or discontinue use.
Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in
many areas.
Y
situations.
Even if your headphones or earphones are the open-air type designed to let you hear outside
sounds, don’t turn up the volume so high that you can’t hear what’
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
T
p
Start your volume control at a low setting.
p
Slowly increase the sound until you can hear it comfortably and clearly
Once you have established a comfortable sound level:
p
Leave it there.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water
6) Clean only with dry cloth.
7)
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9)
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other
grounding prong. The wide blade or the third prong are provided for your safety
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer
12) Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over
13) Unplug this apparatus during lightning storms or when unused
for long periods of time.
14)
Refer all servicing to qualified service personnel. Ser
required when the apparatus has been damaged in any way
is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally
Read these operating instructions carefully before using the unit. Follow the safety instructions
on the unit and the applicable safety instructions listed below. Keep these operating instructions
handy for future reference.
THE FOLLOWING APPLIES ONL
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
p
Reorient or relocate the receiving antenna.
p
Increase the separation between the equipment and receiver
p
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
p
Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the user’s authority
to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
T
Product information
For product information or assistance with product operation:
In the U.S.A., refer to “Customer Services Directory” on page 3.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 905-624-5505, or visit
the website (www.panasonic.ca), or an authorized Servicentre closest to you.
1. —The unit should be ser
1. (a)
1. (b)
1. (c) The unit has been exposed to rain; or
1. (d)
1. (e)
2. —Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3. —When parts need replacing ensure the ser
by the manufacturer or parts that have the same characteristics as the original parts.
Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. —After repairs or service, ask the servicer to per
that the unit is in proper working condition.
Product ServiceProduct Service
CD Section
wAudio (CD-DA)
Sampling frequency: 44.1 kHz
No. of channels:
2 (left and right, stereo)
Frequency response:
20 Hz to 20,000 Hz
(K0.5 dB to L7.0 dB)
Headphone output level:
RMS max. 6.5 mWK 6.5 mW/
16 j (adjustable)
wPickup
Light source: Semiconductor laser
Wavelength: 795
wMP3
Supported bit rates
(Supports variable bit rates):
32 kbps to 320 kbps
(128 kbps is recommended)
Supported sampling frequency:
48 kHz/44.1 kHz/32 kHz
Maximum number of items
(total no. of albums and tracks): 999
(total no. of albums): 500
Maximum album levels: 100
Radio section
wFrequency
Radio frequency:
FM; 87.90 MHz to 107.90 MHz
(0.2 MHz steps)
87.50 MHz to 108.00 MHz
(0.1 MHz/0.05 MHz steps)
General
Dimensions (WCH CD):
138.6 C24.4 mm C138.6 mm
(5
14
/
32
\ C
31
/
32
\ C 5
14
/
32
\)
Mass: 217 g (7.6 oz.) (with batteries)
170 g (6.0 oz.) (without batteries)
Operational temperature range:
0 GC to 40 GC (32 GF to 104 GF)
Note:
Specifications are subject to change
without notice.
Mass and dimensions are
approximate.
Specifications
Batteries used MP3
CD-DA
Radio
(FM band)
2 alkaline batteries (LR6) 75 33 33
Play time
Using on a flat stable surface at 25 G C (77 G F), all sound quality effects are
canceled, Hold is on, Anti-skip is on POS 1 (CD-DA) and recommended bit rate
(MP3: 128 kbps). Play times are in hours and approximate.
pThe play time may be less depending on the operating conditions.
pPlay time will be considerably reduced when playing CD-RW
IMPOR
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MA
RESUL
DO NOT OPEN COVERS AND DO NOT REP
SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT
DAMAGE, DO NOT EXPOSE THIS APP
DRIPPING OR SPLASHING AND THA
LIQUIDS, SUCH AS V
Marking sign is located on bottom of the unit. MPEG Layer
Thomson multimedia.
Caution
